Pavilion DV6137ea: Missing base system device drivers

Similar Questions

• Missing base system device drivers

  I have problems with the following base system devices.  HP Probook 6550 b, product BW255US #ABA, Win 7 Ultimate

  Can you please help?

  Device 1

  PCI Slot 2 (bus PCI 67, device 0, function 1)

  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01

  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C

  PCI VEN_1180 & DEV_E230 & CC_088000

  PCI VEN_1180 & DEV_E230 & CC_0880

  Device 2

  PCI Slot 2 (bus PCI 67, device 0, function 2)

  PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01

  PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C

  PCI VEN_1180 & DEV_E852 & CC_088000

  PCI VEN_1180 & DEV_E852 & CC_0880

  Hello:

  You need this driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_79317_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• missing coprocessor and base system device drivers SM bus controller

  Hello

  I recently formatted my notebook compaq presario v3749au without the recovery disks, because my cd drive does not work. When I saw in the Device Manager, it says that 'sm bus controller, coprocessor and base system device' drivers are missing. I don't know where to put them because these drivers are not available on the hp site. so kindly respond if anyone knows how to find the solution.

  Thank you

  Hello:

  Here are links to the drivers you need...

  This should install it the first 2.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-53361-1&cc=us&DLC=en&LC=en&OS=2093&product=3560053&sw_lang=

  For the 1180

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55937-1&cc=us&DLC=en&LC=en&OS=2093&product=3672886&sw_lang=

• Dv4-1430us: lack of Base system device drivers

  I just clean installed W7 Home Premeuim after a failed attempt of W10, it seems that I'm missing three "base system device drivers. I went to the HP page where the drivers are usually, but I don't see all the downloads.

  If the download page of is the mystery pilots BSD here? Windows Update can't find them.

  DV4 1430US

  Hello:

  You need this driver for the card reader (Base system Dev):

  This package contains the driver for the JMB38X Host Controller Card Reader to
  models of portable supported and operating systems. JMB38X card
  Reader supports the following types of media: SD, MS, MMC and xD.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45180 .exe

• ProBook 6550 b: driver missing Base system device

  After you have reinstalled Windows 10 on a Probook 6550 b I can't find the correct driver for both devices.

  -Driver missing Base System Device 1:
  Device PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 02E2 requires installation.

  -Lack of pilot system of Base 2 device:
  Device PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 01E2 requires installation.

  Is it possible to put me in the right direction?
  
  Thank you very much.

  Lennard

  Hello

  Try to install the Windows 7 version of the Ricoh Media Card Reader Driver.

  Kind regards

  DP - K

• I have a ProBook s 4535 missing base system device

  I have upgraded to Windows 8 and now I have a missing Base system device and can not find the driver

  Hello:

  Download and install the driver for W7/W8 JMicron card reader

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5098225&prodNameId=5098226&swEnvOID=4059&swLang=13&taskId=135&swItem=ob-108947-1&mode=3

  Paul

• 4730 proBook s: Standard VGA Graphics Adapter and Base system device drivers

  Hello, I have a problem with my device manager.  I need to fix or update/install drivers for a Standard VGA Graphics Adapter and Base system device drivers. I can't find anything useful, I please help.

  Best regards

  Hello:

  You need this driver for the card reader (base system device).

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060894&swItemId=ob_116003_1&swEnvOid=4059

  In order to provide the correct graphic driver, I need to know if your laptop's graphics card Intel or AMD/Intel switchable graphics.

  If there is just a standard vga card listed, then you probably need just the driver intel graphics.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060894&swItemId=ob_103472_1&swEnvOid=4059

  If there are two adapters listed standard vga, so you need this driver.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060894&swItemId=ob_101995_1&swEnvOid=4059

• 4440S proBook: drivers missing "Base system device" of 4440S

  Hello, I recently made a new installation of Windows 7 Home Premium 64 bit on a Probook 4440 S.

  I went into Device Manager to install the missing drivers. I'm missing two drivers and I was unsuccessful driver update by using the option "Search automatically for updated driver software" on the tab in properties.

  I searched online by using the values of LDS of material on the Details tab, but links in other posts were most valuable. Can someone help me?

  Lack of drivers by using the property of LDS of material on the Details tab

  #1 base system device

  PCI\VEN_197B & DEV_2393 & SUBSYS_17F3103C & REV_30

  #2 base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30

  All drivers are displayed on your page, including the JMicron card reader support:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229487&swLangOid=8&swEnvOid=4058

• Elitebook missing Base system device

  Hello

  My laptop indicates that I'm missing the Base system device.

  Elitbook HP 2560p

  Of the hardware id

  PCI\VEN_197B & DEV_2392 & SUBSYS_162B103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_162B103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  I can't find the right drivers.

  Can someone help me with this problem?

  Hello

  Install the driver of player card on the corresponding link below.

  Card reader driver - Windows 8.1

  Card Reader Driver - Windows 8, Windows XP, Vista, 7

  Kind regards

  DP - K

• Presario V3440TU - missing Base system device driver

  Hello

  I recently upgraded my system from XP to Win 7 and I was unable to find the drivers for the two "base system devices. I'm on a Compaq Presario V3440TU and my processor is a Core 2 Duo T5300 is Intel 945GM chipset.

  Missing drivers are likely to the Ricoh card reader in my laptop, because I remember facing the same problem while re-installation of XP once and ask for help here.

  I would be really grateful if someone could point me to the drivers of the hardware ID:

  1.

  PCI VEN_1180 & DEV_0592 & SUBSYS_30B2103C & REV_0A
  PCI VEN_1180 & DEV_0592 & SUBSYS_30B2103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  2.

  PCI VEN_1180 & DEV_0843 & SUBSYS_30B2103C & REV_01
  PCI VEN_1180 & DEV_0843 & SUBSYS_30B2103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  Thank you!

  You are the very welcome.

  Once you have installed W7, you have lost the ability to update the BIOS.

  All the updates of BIOS for your model series are written for Windows Vista.

  Attempt to update the BIOS while running Windows 7 is most likely able to make your laptop unusable afterwards.

  I don't see that it was necessary to do anyway.

• HP Elitebook 8440p missing base system device driver

  I have a HP Elitebook Notebook PC with Windows 7, 64-bit 8440p. I had to reinstall Windows 7 and all the necessary drivers. My question is the missing Base system driver. The message that I get from the Device Manager is:

  Bus PC1 68, device 6, function 2. The driver for this device are not installed (Code 28).

  The hardware in the Details tab ID are:

  Pc1\ven_1180 & dev_0843 & subsys172a103c & REV14

  Pc1\ven_1180 & dev_0843 & SUBSYS_172a103C

  Pc1\ven_1180 & dev_0843 & CC_088000

  Pc1\ven_1180 & dev_0843 & CC_0880

  I you apologize for the irregular use of capital letters, but yes, all uppercase.

  Thank you in advance for your help in this matter!

  I reinstalled the drivers of the two Chipset but I also installed the RICOH Media Driver on the HP driver download site. My problem is now solved, but I think this is the last driver that did the trick I thought others regarding their driver problem of Base system with drivers for the SD card. Thank you.

• Missing Base system device driver

  I bought my Elitebook 8560p a few weeks back off a friend. Wiped the whole laptop and installed a new operating system (Windows 7 Ultimate 32 bit). I thought I installed all the drivers but im told Device Manager still lack a "Base system device" driver Help please?

  Hello

  It is very good

  The driver you need is for the Card Reader JMicron Media which can be downloaded and installed from the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5056949 & prodNameId = 5056950 & swEnvOID = 4055 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-93389-1

  Kind regards

  DP - K

• HP ProBook s 4730: lack of Base system device drivers

  Hello world!

  A few days ago I received an error message that my device Base and an unidentified device system no longer have the drivers installed for them (Code 28). This can happen after my last update of Windows, but I'm not too sure. When I try to update the drivers of the device for each Device Manager, Windows cannot find a driver for the device.
  
  These are devices that are affected (not sure if you need the hardware ID, but I included them):

  Base system device
  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880
  
  Unidentified device
  USB\VID_138A & PID_003C & REV_0086
  USB\VID_138A & PID_003C
  
  Don't know if it is also related, but my Standard VGA Graphics Adapter is also having similar problem and cannot start (Code 10):

  PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C & REV_00
  PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C
  PCI\VEN_1002 & DEV_6760 & CC_030000
  PCI\VEN_1002 & DEV_6760 & CC_0300
  
  I use Windows 7 Home Premium (64-bit).
  
  I saw that I can download the drivers from the HP site, but I'm not really sure which ones do I need to download. Some people recommend that you download the chipset, the audio media and network card drivers for my laptop to try to solve the problem.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5060894 & swLangOid = 8 & swEnvOid = 4058

  I can compare the drivers with the names of device in Device Manager, if that's the best way to go about it. I wanted to just a few tips on the best thing to do.
  
  I have some knowledge of the software, but I don't mess with hardware very much, answers in layman's terms would be greatly appreciated!
  
  Thanks for your time. If you need some info on my ProBook, let me know.

  Hello:

  You need these drivers...

  Base system device:

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe

  Unidentified device:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59624.exe

  Standard VGA Graphics adapt:

  This package provides the AMD video drivers, driver audio Control Panel and HD for laptops taken in charge who are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55947.exe

• ProLiant DL360 G8: Missing Base system device driver

  Hello

  I have a HP Proliant DL360 G8 with Windows Server 2008 R2 Enterprise SP1 server, but when I go to Device Manager I get lack of base system device driver. Please I need know what driver to install.

  Properties of the device:

  Hardware LDS:

  PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C & REV_04

  PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C

  PCI\VEN_8086 & DEV_0E26 & CC_088000

  PCI\VEN_8086 & DEV_0E26 & CC_0880

  Location information:

  PCI bus 0, device 4, function 4

  Compatible IDs:

  PCI\VEN_8086 & DEV_0E24 & REV_04

  PCI VEN_8086 & DEV_0E24

  PCI VEN_8086 & CC_088000

  PCI VEN_8086 & CC_0880

  PCI\VEN_8086

  PCI\CC_088000

  PCI\CC_0880

  Best regards

  Hi Rubendiazmarino,

  Try these drivers for your server:

  • HP ProLiant iLO 3/4 Management Controller Driver Package for Windows Server 2008/2012 X 64 (U.S., International)
  • HP ProLiant iLO 3/4 Channel Interface Driver for Windows X 64 (U.S., International)
  • Handset identifier Chipset for Windows Server 2008 R2 (American International)

  After installation reboot, your server for these driver to work.

  Yours faithfully,

  Ryan

• Base system device drivers

  Hello, I am using HP ProBook 4730 s, produces A1E71EA. I recently installed windows 7 ultimate x 64 and I went to install my drivers. Here, I have two of them that say "base system device" when trying to update automatically using the upade driver it says that it cannot do. I also he who says network controller, one is bus USB, pci simple communication and an unknown device.

  Can you help me please?

  Hello

  For the first 2 hardware ID, install the below card reader driver.

  JMicron card reader driver.

  Then, install the following:

  Driver Atheros WLAN.

  Intel MEI driver.

  HP 3D DriveGuard.

  Kind regards

  DP - K