Pavilion dv6755ca: Windows 7 Blue Tooth driver for Pavilion dv6755ca
I bought a stereo speaker of blue tooth and I tried my laptop for matching. However, I believe that my blue tooth driver does not install because I have improved my original OS laptop computer from Vista to Windows 7.
I tried to run Windows updates and the scan HP manufacture but not luck by trying to update. Any help would be most appreciated.
Hello:
I already gave you the link to the W7 BT driver you need.
I have a dv6810us, with the same bluetooth module. It is the only BT module that came with dv6xxx books.
I installed W7 x 64 on it and which is the driver that I used.
BT works very well.
Tags: Notebooks
Similar Questions
-
IPad 3 blue tooth driver for windows 7
Is there an Ipad 3 blue tooth driver for windows 7, 64 bit, and if so how I can find it. I would like to print via my pc and exchange of files, ect. It seems that my pc in combination with its printer should act as an active Airprint printer.
Hello
1. what happens when you try to connect to the iPad?
2. you receive an error message?You can search for the bluetooth driver 3 iPad on the manufacturer's Web site.
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
support iPad link: http://www.apple.com/ipad/Apple support for assistance:
http://www.Apple.com/support/ -
(Redirected) Has no Blue Tooth driver after upgrade to Win 10
Here the device for the Atheros Driver Manager.
This device cannot start. (Code 10)
STATUS_DEVICE_POWER_FAILURE
QUALCOMM Atheros close BluetTooth driverQualcomm-Atheros UART Transport blue tooth driver for Intel series IO Host 63 9 windows 10 controller
What is the reason and what is the remedy?
Assistance is necessary New pilot does not seem to be available from today ' today...
N0orm Radio
Hi N0ormradio,
Please repost this in the forum software and operating system for Windows 10 for assistance.
http://en.community.Dell.com/support-forums/software-OS/f/4997
-
Hello
I'm having Probook 4540 s serial No.: 2CE3490RSG PRODUCT: FOX27ES #ABV WITH WINDOWS 8.1 64 BIT BLUE TOOTH DRIVER NOT INSTALLED PROPERLY I TRIED to INSTALL MEDIATEK SUDDENLY WINDOWS SOFTWARE GET CRASHED... PLEASE HELP ME TO CHOOSE THE RIGHT DRIVE
HARDWARE ID:
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11Hello:
Have you tried the latest version of driver Mediatek BT March 21, 2014?
-
HP Pavilion a6109n Vista 32 bit
Windows cannot load the driver for ATAPI DVD A DH16A1LCdRomHello
Try the Microsoft fix it Center. You receive this error code?
-
I have a laptop HP Pavilion DV4-2140US AMD Turion II M520. I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).
Hello:
Please see if it works.
Paul
-
Windows 8 blue tooth does not connect devices
Hi, Windows 8 blue tooth does not connect devices
1 - Adding devices is interrupted and the phone always appears offline.
2 and in the bluetooth icon (bottom right of the screen) the option 'allow a device to connect' is never on/available.I tried with multiple devices and they are all perfectly between them, has never worked with the computer! Who have already tried with the (uninstalled) disabled antivirus and it worked too!
Hope you will reply soon
Best regards
JPCR
Hi JPCR,
It seems that Samsung has not yet released the compatible Bluetooth drivers for Windows 8. So, you can try to install the drivers in compatibility mode and check out. Here is the link where you can download the drivers for Windows 7.
http://www.Samsung.com/us/support/owners/product/NP300E5A-A01UB
Follow the steps to install in compatibility mode:
a. right click on the driver installation file and select Properties and then tap or click on the compatibility tab.
b. check the box run this program in compatibility modof e.
c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
Reference:
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
Let us know the results.
-
Running Server 2003, Web Edition SP2 Build 3790.
The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.
Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports. pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58
Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads
Diana
Microsoft Answers Support Engineer
-
And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?
http://support.Microsoft.com/kb/314060
Your CD or DVD drive is missing or is not recognized by Windows or other programs
-
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Reference Dell 3000 win xp family, sp 2 card its replacement will not install right.
I just reinstalled windows on my Dell computer and have struggled to reinstall the different divers, applications and programs that I used to have. The long, everything went well, except for the audio part.
Windows Device Manager shows the icon replacement C-media with a yellow top warning label. Under "Properties", it shows this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device.
I uninstalled and completely removed all traces of the drivers C-media, etc. of my computer, rebooted, reinstalled the driver C-media since the original CD (several times!), but the yellow warning label is always there! When I ask to reinstall drivers C-media a notice tells me I have the best drivers now.
BTW, the audio worked perfectly in this machine until the windows reinstall so I am sure that the problem is not with the sound card, drivers or the installation CD. Thanks for any help on this, jim
Hello
Please follow the steps from the link below.
http://support.Microsoft.com/kb/310123
I also suggest you to install the drivers from the Dell site.
http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection
-
Audio loss. Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Tried to update driver and restore without success. Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it. Restored to an earlier date but still what system did not go. Tried to uninstall and reinstall the driver. Uninstall was successful but reinstall it read that the hdaubus file does not exist. I'm a computer dunce. Any help out there?
Hi BarbaraWolfe,There are many causes of Code 39 errors:
- A required device driver is missing.
- A required binary file is corrupted.
- There is a problem with the file I/O process.
- A driver that refers to an entry point in another binary file cannot load.
Re-install the driver by downloading it from the link given:Additional reference on:Check if that helps. -
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
my cd/dvd drive will not read the CD and does not appear in my computer. I get the message "windows cannot load the driver for this hardware device" in the details of the properties of the device above. How can I fix it? My operating system is windows vista and I can only find windows solutions that do not work.
Hello
1. were there any (hardware or software) changes to the computer?
Run the FixIt and check if the problem is solved or not.
Your CD or DVD drive cannot read or write media (Fixit)
Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)
Hope that helps.
-
Original title: CD/DVD drives do not work after upgrade from XP to Vista
I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work. I also tried two external drives, same thing. I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers. Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd! Am tearing my hair!
Hi krt2,
In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load
You can try to uninstall and reinstall the driver for the device to solve this problem.
Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:
a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.
c. on the device properties dialog box, click the driver tab, and then click on uninstall.
d. restart your computer.
Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.
See the links below for more details on the update of drivers:
Updated a hardware driver that is not working properly
Also, read the following article and check if that helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
(KEYBOARD ERROR)
Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Hello
I don't know how it happened.
I tried unistalling the software but have the same problem when connected to e
Help, please
Hi Davedirect,
· It's a wired keyboard or a wireless keyboard?
· Who is the manufacturer of keyboard?
· Since when are you facing this problem?
· You did changes to the computer before this problem started?
· Have you tried to restart the computer and check if the keyboard works normally?
However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below. More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.
Step 1
Remove the drivers from the computer. To remove the drivers to follow the steps below:
a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".
b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.
Step 2
During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:
a. Click Start.
b. access control panel > system > hardware > Device Manager.
c. open Device Manager and expand the keyboard device.
d. right-click on the device keyboard and uninstall the device.
During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.
Step 3
Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.
Access the link below to learn more about the error code 38:
http://support.Microsoft.com/kb/310123
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Application of Intel speedstep
Is it not possible for the HP engineers to give us all a bios where we can turn off the Intel speedstep please? It causes no end of problems and would be better to give the user the decision.
-
COMO MI RESCUE LICENSE 2 YEARS
MI disco original del 2 years is deteriorado con el paso del tiempo, como obtengo una copia nueva sin tener than pay por el again ha.
-
Hi, I am using windows vista, I need to use it to send & receive faxes from my pc, is it possible, if so please guide me how?
-
How can I restore my icon to the Recycle Bin?
Seems to me havedeleted my icon to the trash and does not know how to give my counter top.
-
How can I open adobe reader, when I try all I get is an ad for a photo creative cloud service?