Pavilion dv6t factory (Basic vs. dynamic) Partitions question

The 4 following partitions have been configured on my new laptop.

(C, recovery (D, HP_Tools (Eand the SYSTEM)))

The configuration of the disk was "Basic".

When I created a new partition of data, my only choice was to change the disc "Dynamics", as a 'Basic' partition is only good for 4 partitions. There are several problems with a dynamic configuration (something good some bad). I want a separate DATA partition, but because HP has now added this unknown partition of HP_Tools you can not add another partition without changing the dynamic type.

I like to use a separate partition to allow updates system automatic image even though I know I could lose my image with a faulty drive. The problem is that a disc hard 'dynamic' cannot restore an image correctly.

I'm looking for comments or suggestions to the following:

How important is the partition of HP_Tools?

Store this image on the C: partition as the SYSTEM partition is separate? I've never seen a separate partition for the SYSTEM because it is usually part of the C: drive.

Thank you

As a follow-up, here's what I did.

I reinstalled the original factory system

Deleted the recovery partition

Shrunk the partition 'C '.

Created a partition "DATA" with unallocated disk space

Since I now only 4 partitions of the hard drive has not been converted to dynamic. Now I can save the images on the new "base" partition, of course with the knowledge that the falls in hard drive failure I lose my image. Since I have also periodically to create an image on an external hard drive I consider this acceptable image backup approach.

Tags: Notebooks

Similar Questions

  • error when creating a new partition "the operation you selected will convert the selected disk from basic to dynamic disk...". »

    Original title: getting the error while creating a new partition

    here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.

    I would like to join the screenshot of the error, how?

    Hello

    1 have had any changes made on the computer before the show?

    2. how many partitions are there currently on the computer?

    3. how many hard disks on the computer do you use?

    4. when exactly you get the error message?

    I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:

    Create a new Partition on a hard disk in Windows 7

    http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx

    I also suggest you the link and attach a screenshot of the screen.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  • Pavilion dv6t-2300: lack of basic systen device drivers

    Recently, I loaded Windows 10 replacing Windows 7 on my Pavilion DV6T 2300. Miss me him now four Base system device drivers.  They are listed under my list than other devices Device Manager.

    Hello:

    You need this driver for these devices...

    This package contains the driver for laptop models JMicron card reader supported and operating systems.

    File name: sp45010.exe

  • Key Action WiFi does NOT work on Pavilion DV6t-7000

    I just got a new Pavilion DV6t-7000 Quad Edition laptop, and the first thing I did after I boot the system was to upgrade the operating system.  I have an MSDN subscription, so I've upgraded to Windows 8 Pro (RTM).  Everything is great... except for the WiFi button.  It does simply not to turn on or turn off the WiFi connection.

    It always shows a white LED while the WiFi is on, and pressing the button does nothing.  Other action keys may work... the brightness, mute audio, etc.  If I disable the WiFi in the network Panel, then the light turns red.  As if she recognizes the WiFi it's takes no action to actually turn on or turn it off.

    I updated the BIOS to the latest version, by the site of HP support for the 64 bit of Windows 8 OS, and I checked in the BIOS action keys are enabled.

    Can someone help me get this to work?

    Thank you!

    -Andrew

    Have you tested it before loading Windows 8 on it?

    Support of thing going before interview, that Windows 8 drivers are available or not, is to perform a recovery to the original embedded operating system.

    If it is a fault, the question would be present in the original Windows 7 operating system as well. I suspect that this is largely a software/driver problem.

    Also, I recommend the update to the BIOS before installing Windows 8. Windows 8 installations work differently with the BIOS that previous versions of Windows, so the end result would be different to reinstall Windows 8 from the version of the BIOS is different this time.

    However, I recommend he get back to Windows 7 in order to ensure all features is present.

    I know you probably don't want to go back in the recovery efforts there to Windows 7 and then put 8 on.

    By chance, you did the recovery disks for your system first? If this is not the case, they must be ordered from HP. You can try to use the Recovery Manager to create, but I don't know if it will work since the operating system has been modified.

    In all cases, whether it works or not with the original software, she shipped will help determine if it is a defect or not. More than likely, it is not and is only a matter of unfortunate compatibility with Windows 8.

  • Pavilion dv6t - 6 c 00: recovery/boot drive for a Pavilion DV6t - 6 c 00

    I have a dv6t - 6 c 00 with a ssd drive that out crapped on me.  I want to replace the SSD by another but cannot find my recovery disc I made when I bought it.  When I do a search of the web site, so I can order one, I find three different principles, but not sure it it could have been.  How can I choose the one he could have?  For the life of me I don't remember.

    What are those found on the web site.  Anyone has an idea on what to look for on the computer that could tell me.  I watched all the tags inside and outside.

    Thank you

    Please try one of the following methods to locate the name or product number. DO NOT include your serial number.

    Figure: Example of label Service HP

    Figure: example of a window system HP information

    Figure: Example of product number HP Support Assistant

    Figure: Example of information system in the BIOS

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • upgrade HP Pavilion dv6t - b 6, 00

    Hi all

    Honestly, I have very little knowledge on the computer, so please excuse me if my questions may sound stupid to you.  I am looking for a laptop for the end of the game, and decided instead to buy a new, hopefully update my only current.

    I want to improve my HP Pavilion dv6t - b 6, 00 in terms of memory, hard drive and even CPU processor and graphics (if possible).

    I have read the manual in PDF and have led to several questions.

    1. He is described in the manual that I can improve my memory from 4 GB to 8 GB. But when I opened the top of the laptop, it seems to me that there are 2 slots for memory bars. Does this mean that I can spend a total of 16 GB of memory (2 x 8 GB)? And what type of memory who adapt and increase the performance of my machine?

    2. on the hard drives, I currently have the HTSS547575A9E384 from manufacturing with 750 GB, 5400 RPM Hitachi. I wonder can I replace it with a hybrid drive SSD or a SCSI one or at least a 7200 RPM with top cover? Which do you think it would be a better option for me?

    3. the graphics card I have currently is the Radeon (TM) HD 6490 M, and I would be upgraded to a Nvidia one.  It does not show on the manual how to remove and replace the graphics card. Can you please let me know to replace and what kind of options do I have?

    4. I would also like to upgrade the card on my laptop wireless in the hope of improving connectivity. I currently have an Intel Centrino Wireless - N 1030 (model: 11230BNHMW) installed on my laptop. Can I replace it with an Intel Dual Band wireless-N or AC one? On the market at the moment there is a card wireless with bluetooth module as well, so if I install one of them, it would affect my bluetooth connectivity?

    5. Finally, on the processor CPU, my laptop has the Intel Core i7-2670QM. If I want to update, should I replace the motherboard and graphics card also? Can you please show me what choice do I have?

    I really appreciate your time and your help.

    Better compliance

    Deryck Ng

    1 memory. You have the Intel version so the maximum is 16 GB (2 x 8) and your laptop uses DDR3-1333 and this type will work:

    http://www.Amazon.com/634091-001-parts-quick-notebooks-PC3-10600-1333MHz/DP/B008I6LNZY

    4 concerts for 16 concerts will be a major upgrade according to what you are doing. 8 concerts would probably be a lot and much less expensive that you just add a 4 GB module. For the money by adding a second module of 4 gig is your best update you will get a double benefit of total RAM increased and a two-channel operation, transfers of memory are perhaps 8 to 10% faster.

    2 disc. Yes, the drive 5400 RPM holding back you. You can not install a disk scsi hard. Your interface is SATA. You can install a mechanical drive of 7200 RPM, a hybrid car or a full disk solid state, one of which would be a big improvement, the SSD improved considerable, but at a cost. Post back with your budget and we can give you the best options.

    3. no update video card is possible. This is why the manual does not because there is no such thing. It's a chip welded directly into the motherboard.

    4. wireless. HP seriously limits the wireless options, but there is a Centrino Advanced-N 6230 option that is a map of 2.4 or 5 ghz "N". See Page 59. You buy exactly the card HP with a part number of HP.

    http://www.eBay.com/ITM/Intel-Centrino-advanced-N-6230-abgn-WiFi-Bluetooth-3-0-wireless-card-/171367189306?PT=US_Internal_Network_Cards&hash=item27e647cb3a

    5 CPU. It is the strongest and best you can install.  Intel® Core® i7-2860QM 2.50 GHz (turbo SC until)
    3,60 GHz) processor (FSB 1600 MHz, 8, 0 - MB L3 cache, dual core, 45 W). Frankly, not worth the significant expense and difficult. The CPU you can already be very capable.

    None of the improvements that I suggest will turn your laptop into a game machine. If that's your goal, sell your laptop and apply the product with something that has the features you need.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP Pavilion dv6t 6100 drivers

    Hello, I have a hp Pavilion dv6t 6100 CTO Quad edition, model number LM720AV with the graphics card Radeon HD 6700 M. I can't install the Intel HD Graphics driver.

    Recently, the tables of partition on my hard drive I've screwed up, and I was forced to erase the entire disk, recovery sector included, to reinstall windows 7 Home premium. I installed most of the drivers, but the driver "Intel high definition (HD) Graphics Driver" will not be installed because the installer nixes installation and indicates something of this order: "your computer does not meet the hardware requirements. I am sure that I download the right driver from the right pagel also, I download the driver even when I use the automatic detection feature drivers. I used the HP support assistant program, but the only driver it says that I need is the biometric scanner. Also, I installed the radeon drivers, but my card is declared invalid in the Device Manager. How could do to solve this?

    Thanks for your help.

    First of all, it's a great range of info that you put there for me; I wish that every person in forums answered that although you did right.

    In any case, I realized the solition, although I'm not sure the cause mechanics. I found an intel driver hd in file system of controllers of ata ida from the Device Manager and uninstalled, then did the same with drivers Radeon and finally reinstalled Catalyst. I guess it was something to do with installing stand-alone installation intel makes wonder why they are avalible for download in the pilot centre involving the user must install in the first place.

    Now, my excellent work of pilots as evidence by I can get a much better resolution, I can change the brightness and the whole system runs out cold by about 75% before installing the drivers.

    Thanks again for your help.

  • Pavilion dv6t-3100 CTO: Windows 10 Bluetooth problem

    Greetings,

    I am trying to connect a bluetooth mouse for my HP Pavilion dv6t-3100 CTO Entertainment Notebook PC, its been 10 windows upgrade, I'm not sure if she actually had bluetooth on its previous operating system, the network adapter is "Intel Centrino Wireless-N 1000".

    Device Manager shows no bluetooth driver, after having gone through the hassle of downloading drivers and tried different methods, I started to wonder if my PC has made bluetooth or not! How will I know?

    Help, please

    Concerning

    Dajani

    Hi @MDajani,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6t-3100 CTO Entertainment Notebook and problems with the installation of Bluetooth. Your system did not come with Bluetooth.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • Install WD Black2 Dual Drive on a Pavilion dv6t-7000

    Hello

    I recently bought a new internal hard drive for my HP Pavilion dv6t-7000 CTO Entertainment Notebook PC and have some difficulties to install the drivers for it. I bought a Western Digital Black2 Dual disc, which is a hybrid disk with 120 GB SSD and 1 TB of HARD drive, but I can't access the 1 TB because the installer for WD drivers keeps returning an error code.

    After much digging, I found documentation of the WD site that States the particualr error I received was due to one) the SATA mode to RAID in the BIOS, or b) an Intel driver a RAID reporting configuration. I can not check the BIOS settings myself, because the tab in the BIOS for this is hidden and locked down due to the fact that I'm working on a laptop of HP (I found answers on the forums for models with slightly different laptop computer that reported the AHCI is the default SATA for HP laptops) (, but unable to verify for my particular model). However, I was able to find an Intel driver that can cause the problem in the Device Manager. It is listed under 'Storage controllers' and is called 'Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller '. When you contact the service customer of WD, the representative has tried to help me change this default Microsoft Inbox Driver by following the process: (right click > update driver software > Browse my computer... > choose from the list of device drivers). Unfortunately, it was not useful because the afforementioned Intel driver is the only one available. I was a bit puzzled by that because I installed windows 7 from scratch, only adding the drivers from the HP site needed to establish a wireless connection to download the installation of WD software.

    So basically I'm looking for help in these areas: a) to determine the particular my laptop model SATA mode, b) to understand why I have the default Microsoft Inbox Driver, c) installation of the Microsoft Inbox Driver default value or a Variant that works with AHCI, and/or d) any other course of action I could take additional troubleshooting.

    Operating system: Windows 7 Home Premium 64-bit (installation costs)

    Laptop model: HP Pavilion dv6t-7000 CTO Entertainment Notebook PC

    Hard disk: Western Digital Black2 Dual Drive

    Error: A bad SATA mode in the BIOS or reported by the Intel driver

    Pilot suspect: Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller

    Thank you kindly,

    Gorkycreator

    This problem has been resolved in a more precise message than I did in the operating system of your laptop and drivers support forum.

    Here is the link:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-SATA-storage-driver-HP-Pavilion-DV6/TD-p/3970552

  • Upgrading RAM for Pavilion dv6t - 3000 CTO Select Edition Entertainment Notebook

    Model Pavilion dv6t - 3000 CTO Select Edition, Prod #VXO69AV, Intel Core i5 - 450 M (2.4 GHz with 3 MB L3 Cache) with Turbo Boost up to 2.66 GHz, 160 GB Solid State Drive Flash Module, 1 GB ATI Mobility Radeon HD 5650 switchable graphics, Windows 7 Ultimate. I currently have the original 6 GB of ram that came on the HP laptop, which includes a stick of 4 GB and 2 GB key.

    I want to spend the maximum amount of ram and the ram for maximum performance (speed). Analysis of Crucial.com says I have 6 GB of ram and the maximum ram is 8 GB. He also says that I can buy one (or two) 4 GB DDR3 PC3-12800. CL = 11.    NON ECC unbuffered.     DDR3-1600.   1.35v. here is the link for the crucial scan and recommendations:

    http://www.crucial.com/ProductDisplay?displayCompatibleLogo=1&urlRequestType=base&catalogId=10151&PR...

    Here is a link below for my maintenance SE dv6t and Service Guide, with memory on page 70. The service guide references DDR3 PC3-10600 clocked at 1333 MHz.

    http://h10032.www1.HP.com/CTG/manual/c02657339.PDF

    Issues related to the:

    The Crucial scan seems to direct me to the memory of better and faster that is listed in the Service Guide. My laptop took advantage of this Crucial memory to operate at faster speeds than the memory, I have now? What latency (CL) cases? I saw sticks to new Egg with CL = 9 instead of this Crucial CL = 11. CL is important? What I have to buy two Crucial 4 GB sticks or I can I keep my original 4 GB stick and add a Crucial 4 GB stick for my 8GB? Is Crucial memory memory low density -something I've read elsewhere that I need? FWIW, a diagnostic analysis of Norton said that my current memory is syncing to 1067 ns.

    I have also these two links below for key USB PNY to a Best Buy nearby. The first stick of memory PNY seems to correspond to the Crucial memory card. Is - this low density memory PNY memory? And yet once, can I buy a single stick of 4 GB and add to my current 4 GB stick? This 4 GB PNY stick below which seems to fit the profile of Crucial scan is what I would buy if he tell you it's compatible, because I can buy it at a Best Buy near and easily return it if it does not work:

    http://www.BestBuy.com/site/PNY-1-x-4GB-DDR3-low-voltage-notebook-memory/5745153.p?ID=1219153729590&...

    And here is the link to a second best buy PNY 4 GB stick whose plug appear to be closest to the Service of Guide specifications, but this stick may not be low voltage and it has less maximum MHz:

    http://www.BestBuy.com/site/PNY-4GB-DDR3-SDRAM-memory-module/3779273.p?ID=1218431615147&skuId=377927...

    Thank you for your help and your recommendations!

    Hello.  I'll answer my own questions in the last post above.  Fortunately, HP expert Paul Tikanen resolved my questions in a thread with the following response.  Thank you, Mr. Tikkanen!

    "The faster the memory will run in your laptop is at 1066 Mhz, which is the speed of the FSB of the i5 - 450 M.

    processor.

    http://Ark.Intel.com/products/49022/Intel-Core-i5-450M-processor-3M-cache-2_40-GHz?q=%20i5-450M

    So, my recommendation would be for you to buy a module of memory 4 GB DDR3 PC3 - 10600 (1333 MHz).

    Thus, even the 1333 MHz chip will only work at 1066 MHz.

    I had a lot of success with this configuration of brand and the memory chip.

    Regardless of the brand you download, make sure he's 8 the little black chips of memory on each side of the Board, not 4.

    http://www.newegg.com/Product/Product.aspx?Item=N82E16820231341 ".

  • Pavilion dv6t-7000 failed to create a virtual hard drive for a dual boot Windows 7 / windows 8

    Hi, I just bought this system, a Hp Pavilion dv6t-7000, Enterntainment CTO notebook PC.  I want to take the amount of space between the C drive and create a virtual hard disk.

    Disk 0 is severed as follows:

    System:

    199 MB NTFS; Primary partition, Active system

    C: 678.60 GB NTFS; Boot, page file, crash dump, primary Partition

    D recovery: 21,53 Go NTFS; Healthy primary partition

    HP_tools 108 MB Fat 32; Healthy primary partition

    I would take 50 GB on C: and create a virtual hard disk to install windows 8 to have a dual boot system.  Can someone point me to a credible link that describes how do this or share the solution?  I tried a process described in TechRepublic where you create a virtual hard disk, and then start on Windows 8, shift f10 in an admin window and try to use diskpart select vdisk file that does not exist, that is to say, I'm not.

    Is there anything else I need to do?  I can do this via disk management?

    Thanks much for any info.

    I found this process is here.

    It seems similar to the process of the technology of the Republic, but it has a few key differences. Give the TechNet process a try it may work because of the extra steps, he has.

  • HP PAVILION DV6T-7000 (A5F76AV)... Display and keyboard

    Hello

    The screen of my laptop [HP PAVILION DV6T - 7000 (A5F76AV)] is not good vewing angles, he shattered a lot. Is it possible to update the screen? I think it's a type stantard of HD with a resolution of 1366 x 768 px, and hopefully upgrade to a WUXGA anti glare screen with resolution 1920 x 1200 or 1080 px.

    I checked hp'partsurfer and I guess that's what I was looking for: (682068-001SPS-DSPLY HU 15.6 FHD AG ALU DSC)

    I am currently in Saudi Arabia. Please can you me if the display can be updated here?

    Apart from that the keyboard has a backlight. Can I set the keyboard to a backlit keyboard?

    Thank you.

    Hello Ryan-7,

    Welcome to the HP Forums! I hope you enjoy your experience!

    I understand that you are looking to upgrade your screen and keyboard. I'll give you the best information I can to help you! As a reference, I'll give you this product maintenance and care guide.

    Here are all the views available for this laptop, with a description:

    the display Assembly 15.6 inches

    For use on all computer models:

    display block 15.6 inches, glare, FHD aluminium finish: 682066-001

    15.6-inch BrightView HD display, aluminum finishing block: 682065-001

    For use only with the computer models equipped with an Intel processor:

    15.6-inch, non-glare, FHD display Assembly in aluminium finish (to be used on computer

    models equipped with a graphics subsystem with discrete memory): 682068-001

    15.6-inch, non-glare, FHD display Assembly in magenta finish (to be used on computer

    models equipped with a graphics subsystem with discrete memory): 685985-001

    display block 15.6 inches, glare, FHD in magenta finish: 685983-001

    15.6-inch BrightView HD display, aluminum finishing block (to be used on computer

    models equipped with a graphics subsystem with discrete memory): 682067-001

    15.6-inch, BrightView, HD displays Assembly in magenta (to be used on computer finishing

    models equipped with a graphics subsystem with discrete memory): 685984-001

    15.6-inch BrightView HD, display the Assembly in magenta finish: 685982-001

    Here are all the available keyboards that are backlit:

    Keyboard with backlight (including backlight cable):

    For use on all computer models to the United States: 682081-001

    To be used on the computer models equipped with an Intel in Saudi Arabia: 682081-171

    To be used on the computer models equipped with an Intel in Belgium: 682081-A41

    To be used on the models of computer with an Intel processor in the Netherlands: 682081-B31

    One bold is the one that is available in your area, to make it easier for you. To order the part, simply call HP.

    You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

    Please let me know if you have any questions or concerns. Thank you for choosing the HP Forums. Have a great day!

    Mario

  • HP Pavilion dv6t-7000: want to boot from the cd drive, but can't get the UEFI bios

    I try to perform a simple boot from a CD/DVD on my HP Pavilion dv6t-7000 portable player.

    After I bought it, I divided the hard drive into two partitions, is win8.1 and the other win7.  I tried the boot menu (by pressing ESC when it first starts) and the possibility to enter the BIOS.  However, he will just immediately go back to the start menu, inviting you to select win8.1 or win7.

    Pretty frustrated at this point.    I watched a video on youtube where the guy said go to the bios UEFI and toggle the settings, but I can't even BIOS.  Shouldn't UEFI recognize that there is something in the CD/DVD drive and ask if you want to boot from it?      Thanks for all answers

    After tapping Esc and get boot F9 menu-tap Options. Use the arrow key to move down and highlight / select the CD/DVD and press ENTER.

  • How to convert a primary dynamic partition in parthition? while I can install OS second in the other partition in the other parthition.

    Hello

    I am using windows server 2008 r2. It is installed on the c: drive.

    I have other free 25 GB which is not attributed. I want to install windows 7 on that partition.

    How can I do that.

    mark that... my machine is built on a 32-bit platform so that I can have use Hegg-v.

    I try to use the utility disk part, but due to lack of knowledge, it has end course errors.

    GUID me.

    Convert dynamic disk

    Windows must be installed on a basic disk. See:

    http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa363785 (v = vs. 85) .aspx

    http://www.dynamic-disk.com/Windows-7-convert-dynamic-disk-to-Basic.html

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-basic-and-dynamic-disks

  • HP Pavilion dv6t - b 6, 00 CTO Quad Edition gel

    I have the HP Pavilion dv6t-7000 CTO Entertainment Notebook PC, with 8 GB of RAM, hard disk 7200 RPM and 32 GB of WSSD Cache on the hard drive, and I noticed that there was a problem of freezing of small. Happens at random times, everything freezes, I get messages only respondents, and if the music plays, he also stops, but he just goes for 15 seconds and picks up back. I already did a check of the hard drive and gave me no error and I also did a factory reset and problem persists. My sister also has HP Pavilion dv6t-7000 CTO Quad Edition and same problem appears. I don't know if it's a hardware or software problem.

    I did a clean install of windows 7 and just reinstall the drivers, so the problem is now resolved.

Maybe you are looking for

  • Firefox 4 will not open thunderbird for mailto and send links

    I use Windows 7 Enterprise.Since the FF4 update will not open Thunderbird when a mailto link or send the link is clicked. My system has Thunderbird selected as the default e-mail client, and these links work in other browsers. Following some help onl

  • WIDI is not connecting on HP Envy 17

    Hello. Can you help me? I have HP ENVY x 360-15-w100ur (http://support.hp.com/us-en/product/hp-envy-15-k200-notebook-pc-sdoor series/8499294/model/9093531/document/c04952393), I need to WIDI, but a Realtek RTL8723BE wireless adapter. Can I replace it

  • Reading data Zumbach USYS

    I'm looking for a driver or a VI read data of diameter of a Zumbach USYS. We will acquire 5 or less reads per second for 5 hours. Has anyone interfaced with a Zumbach USYS? Is - what the Zumbach has a RS 232 port. Can I just put a sub 'read rs 232' v

  • My games are too dark on Window Vista, so I see nothing? Any HELP?

    Can not see the game when I'm playing because it's too dark. How can I fix this. It happened on a playground.

  • ThinkPad USB 3.0 Dock\Twist Internet Explorer causing

    Hello I'm racking me my brains on this one! I work in a school where we have recently acquired 60 Thinkpad odd twists. In the classroom, we have Thinkpad USB 3.0 docks connected to SmartBoards. The question we have is very strange - when connect us t