Pavilion DV7 - 1038ca Windows 7 - remote control does not

Hi all

Because I updated the OS to Windows 7, the remote control for windows media center does more work. I am now running a windows 7 Ultimate 64B on a Pavilion DV7 - 1038ca.

I read a lot of posts and so far I have found this:

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-78236-1&LC=en&DLC=en&cc=us&... but it doesn't seem to work for me as an error (9996).

Is there something I can do?

Thank you.

CATA

Simply because the tension seems ok doesn't mean it's all good, if it's heading 2006. Current stored in batteries, it's what makes their work.

Kind regards
ERICO

Tags: Notebooks

Similar Questions

  • HP Pavilion dv7-1240us touch sensitive volume control does not

    Vista 64-bit

    the touch controls for volume, power switch and mediasmart wireless do not work. I'm getting annoyed with contact hp about this. someone has a similar problem and, hopefully, a solution? I'm about to use this laptop for the practice of the target with my glock and ar15

    I have a dv7-1245dx and just started having the same problem... it was only for a few days...

  • Satellite P100 remote control does not work

    Hello

    Guys, I bought a toshiba satellite p100 and the remote with it does not work...

    no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

    Help, please...

    Thank you...

    Post edited by: qazam

    Hi Qazam

    How did you test the remote control?
    What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

    I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

  • Satellite X 200 - after upgrading Vista remote control does not work

    Hello

    I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

    Is there a driver for my remote?

    You may need to install the infrared driver.
    This driver is required to activate the infrared port on your laptop.

    You can find it here in the X 200 section
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • IR remote control does not work with the new imac

    IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

    Correct, because Apple no longer includes the IR sensor in newer models

  • Remote control does not not on Touchsmart 610-1030uk

    Worked very well for a long time. Now out of warranty. Battery very well. Indicator on the remote and on PC (white LED on the front panel) show IR work. Mouse and keyboard are still working fine. I tried uninstalling and reinstalling the drivers for Microsoft eHome infrared transceiver but still can not respond to remote control of the machine.

    Any thoughts?

    Hello frrw. Sorry to waste your time. I changed the batteries and it works great. It seems that the red LED on the remote control and the white LED on the PC that flashes when I press a button on the remote control do not mean that the batteries are strong enough.

    Meanwhile, I have this recurring problem with blu - ray players. I'll post a new question and maybe you can help.

    Thank you very much.

  • D7 3180 US: after the upgrade to windows 10, hp dv7 remote control does not

    Hi guys!

    I have a HP DV7 3180 us that I have upgraded to windows 10.  I have 3 basic system devices that are listed as unable to find drivers for them.  I guess that one of them is one that allows me to use my remote, as now it does not work. I was unable to find a windows 10 driver, or anything that can help me solve the problem.  I tried to have HP scan my computer and update all the drivers, but course who has failed several times.

    Thank you

    Kyle

    Hi, Kyle:

    You need this driver for basic system devices...

    This package contains the driver for laptop models JMicron card reader supported and operating systems.

    File name: sp45010.exe

    You can use this driver for the IR remote...

    This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.

    File name: sp44983.exe

  • Qosmio G30 - Media center remote control does not work in windows

    Dear all,

    I have a Qosmio G30-194,
    first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
    Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

    Please advise me what to do, should I send it to the service center, or there is an easier solution.

    Mazen h
    NB:,: my laptop info are:

    PQG32E-01P018AR model number

    Thanks in advance

    Hello

    > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    If you had a problem with the VGA chip then the whole motherboard has been replaced.
    Maybe it has something to do with your problem.

    Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

  • Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

    I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

    I can not find a model of dv9249 specifically on the hp site. I found the dv9200
    series. you have a link to your specific model?
     
    in all cases, try to remove the Device Manager devices and if requested if you want
    to remove drivers, select Yes. then make a stop at cold and then turn it on.
    Finally, see
     
    link of a person found an alternative driver that solves the problem) on the page
    (See above).
     
    It seems that several HP models affected related issues.
     
    If this does not resolve the problem, suggest that also posting in the forums of HP.
     
     
     
    On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
     
    > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
    Interface
    > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
     

    Barb Bowman

    http://www.digitalmediaphile.com

  • Satellite A200 - 25 X - remote control does not work on Windows 7

    Hello

    I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

    Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

    I hope someone here can help me.

    Thank you

    Hey,.

    Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    * Archive * > Satellite > Satellite a series > Satellite A200

    Check this box!

  • HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

    I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

    With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

    I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

    PainedByTech wrote:

    I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

    With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

    I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

    For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

    For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?

  • Remote control does not not in Windows 7 Starter

    Hi all

    We have an application that can be controlled via the remote control. It works fine in Windows XP PC. But when I try to access the same by opening Internet Explorer on a PC running Windows 7 Starter OS, I only get the "download 0.00% of 0 bytes'. I disabled Windows Firewall and there is no software antivirus also. What could be the reason for this? How could I solve this problem?

    Thanks in advance,

    Luxama

    The system that had the problem was a netbook comes with Windows 7 Starter. We recently discovered that there are some parental control utilities in the netbook that has prevented the LabVIEW remote command access. We were not aware of his presence, and he had not shown any indication that he had blocked communication remote panel. We have uninstalled this utility & remote control began to work as expected. Thanks again for your help.

  • Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

    Hello

    My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

    Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

    If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

    Thanks for any help or ideas
    Steve

    After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
    But I can't give you a reason why it causes an error.

    I found this similar thread in the forum
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

  • Re: Qosmio F30-131: remote control does not not with Vista Ultimate

    Hello!

    I just installed Vista Ultimate but my remote does not work.
    I reinstalled everything in the right order as written in the command file install on Toshiba Homepage but its always answers don't not under Vista.
    I can just turn on my laptop when its off the remote control.

    Anyone know what to do?

    (PS: I do not have my Toshiba restore CD for Windows XP MCE)

    Hello

    You reinstall the remote control manager? This utility enhances support for a remote control on your computer.
    How about Value Added package? There is a new version available. Try to update it too.

    But back to the basics, the Qosmio F30-131 belongs to the series of PQF30E. Did you choose the drivers for this series?

    However, this laptop has been delivered and pre-installed with Win MCE. Can this remote works only with the XP version of Windows Media Center.

  • BD Playstation Bluetooth remote control does not work with Toshiba BT stack

    Hello!

    I've matched Playstation Bluetooth Sony BD remote control (model: CECHZR1E) with Windows XP SP3 (Spanish) PC last Toshiba Bluetooth Stack v.7.10.12 running.
    But if I press the buttons on the remote does not respond any personal computer.

    I have configured the battery Bluetooth to run the AV and AV service must send commands to Windows Media Player. In Windows Media Player, I have configured to use command AV Toshiba.

    If I press a button on a remote control, with he can link to PC, the icon changes color and Configuration Bluetooth appears the link has been established, but it is the interaction I get this remote control.

    Please, advice that tests should I use or do I have to install any additional software.

    Thanks in advance for your kind attention!

    Ensure that the AV remote control Service is running:
    Right mouse click on Bluetooth-> Options... system tray icon-> [general] tab: 'AV remote control Service' (must be verified)

Maybe you are looking for

  • How are we going to favorite Web sites?

    I like the bookmark pages I like. but I can't go to these favorite Web sites. Please suggest me how can I find these saved pages.

  • How can I stop Firefox cache pages?

    Go to a site of news or weather and see the news or weather 3 days ago are ridiculous. I deleted all the history, I put browsing private, said Firefox could not remember history, all to no avail. It still shows the old content until I update.

  • Tecra S3 - are there opportunities to work without fan noise?

    Hi, I recently bought a laptop Tecra S3. Everything is ok, but the fan is always on. When I don't do anything for 5-6 minutes the fan is down (turn off) but after a few minutes, even I leave laptop only turns on again. I should add that I put a profi

  • How can I delete all history on the compurter and user profiles?

    Original title: computer sales how to remove user profiles in windows 7 How to remove all profiles user and history? Windows 7

  • Impossible to uninstall photoshop

    I had installed photoshop before, but after having not used the program that I decided I wanted to uninstall it. However, when you try to uninstall the program that a message would jump up to say he encountered errors when trying to uninstall the pro