Pavilion dv7 - 1228ca: how to order the LCD backlight for hp pavilion dv7 - 1228ca

Hello, could someone to give advice how control the backlight of the LCD screen for hp pavilion dv7 - 1228 ca?

Thank you.

Hello

Unfortunately, the machine is too old, not parts available:

http://PartSurfer.HP.com/search.aspx?SearchText=NB238UA

Please use the part number on the list and the search on eBay or other online stores.

Good luck.

Tags: Notebooks

Similar Questions

  • How to order the new AC for Satellite A350-20 q power?

    Hello

    I bought my satellite A350-20 q 2 1 / 2 years and when I turned on my laptop screen was low, the power supply is already on, but he did not have any change. How can I order a replacement?

    Thank you

    According to specification for computer mobile power for your laptop has PA3290E 3AC3 part number. I don t know where you live but Googling around and using the part number as search term you will be, I hope, find enough online stores where you can order the new adapter.

    You can also contact the nearest Toshiba service provider and ask them to order it for you.

  • How to order the two fans for vista

    How to do for fans to order both for my family vista premium, erro messages get that fans do not work

    Need to know how much cost fans

    Hello

    What could you mention the model number and product of the system for which you want to buy the fan.

  • How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

    How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

    Read my initial response on what it takes to please.

    "See if this helps you:

    These lines indicate corruption graphics driver or lack of graphic material.

    Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

    http://WWW8.HP.com/us/en/support-drivers.html

    If that fixed it, it seems to me be a problem of graphic material.

    Because it's a laptop; If under warranty, contact HP.

    If is not under warranty, contact a repair shop, local. »

    See you soon.

  • HP pavilion 15-e034tx: how to choose the right RAM for laptop

    How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

    Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

    1-4 + 4 GB
    2-4 GB + 8 GB
    3-8 GB + 8 GB

    Thank you

    From the Manual:

    Two customer accessible/upgradable memory module slots

    Support for dual channel DDR3L (1600 MHz)

    Support 8192 MB RAM system in the following configurations:

    8192 MB (8192 MB × 1, × 4096 MB 2)

    Manual download link

    See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

    4 GB (PC3L, 12800, 1600 MHz) 691740-001

    http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

    A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • How to order the code so that it is very.

    Hello.

    I will start by saying that I am very new to flex.

    I have a very basic question which I hope will be very easy for you to answer:

    I want to create a great application in flex and not sure how to order the code so that it is separated into blocks of code. I want a tool like the php include function, or at least be able toseperate code so that it won't end up as a big chunck of code on a single page.

    What do you think is the best way to do this?

    Thank you for your time.

    You start in Flex, but if you are not new to programming in general, you have probably heard of the MVC design pattern.  In consider sure Adobe Cairngorm for Flex and MVC, check Mate, PureMVC and well.  In my view, however, MVC is overkill in many situations, even large apps (unless they are multi-developers projects).

    You can also look in code-behind, a model of design often seen in c# work, although I have not used it myself.

    Do as the second poster mentioned and split your application into sections MXML and Actionscript, but go further and split your application into several custom components.  Each component can have its own file MXML and Actionscript.  I found it's way faster and easier to organize even large applications.

    Programming Flex 3 from Oreilly publishing has a large section on how to break down your application into several manageable components.  And there is probably a chapter like him in many Flex books.

  • How to find the child level for each table in a relational model?

    Earthlings,

    I need your help, and I know that, "Yes, we can change." Change this thread to a question answered.

    So: How to find the child level for each table in a relational model?

    I have a database of relacional (9.2), all right?
    .
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
  /↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
  "º"
    Tips:
    -Each circle represents a table;
    -Red no tables have foreign key
    -the picture on the front line of tree, for example, a level 3, but when 3 becomes N? How is N? That is the question.

    I started to think about the following:

    First of all, I need to know how to take the kids: 
    select distinct child.table_name child
  from all_cons_columns father
  join all_cons_columns child
 using (owner, position)
  join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
 using (owner)
 where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;
    Thought...
    We will share!

    Thanks in advance,
    Philips

    Published by: BluShadow on April 1st, 2011 15:08
    formatting of code and hierarchy for readbility

    Have you looked to see if there is a cycle in the graph of dependence? Is there a table that has a foreign key to B and B has a back of A foreign key?

    SQL> create table my_emp (
  2    emp_id number primary key,
  3    emp_name varchar2(10),
  4    manager_id number
  5  );

Table created.

SQL> ed
Wrote file afiedt.buf

  1  create table my_mgr (
  2    manager_id number primary key,
  3    employee_id number references my_emp( emp_id ),
  4    purchasing_authority number
  5* )
SQL> /

Table created.

SQL> alter table my_emp
  2    add constraint fk_emp_mgr foreign key( manager_id )
  3         references my_mgr( manager_id );

Table altered.

SQL> ed
Wrote file afiedt.buf

  1   select level lvl,
  2          child_table_name,
  3          sys_connect_by_path( child_table_name, '/' ) path
  4     from (select parent.table_name      parent_table_name,
  5                  parent.constraint_name parent_constraint_name,
  6                  child.table_name        child_table_name,
  7                  child.constraint_name   child_constraint_name
  8             from user_constraints parent,
  9                  user_constraints child
 10            where child.constraint_type = 'R'
 11              and parent.constraint_type = 'P'
 12              and child.r_constraint_name = parent.constraint_name
 13           union all
 14           select null,
 15                  null,
 16                  table_name,
 17                  constraint_name
 18             from user_constraints
 19            where constraint_type = 'P')
 20    start with child_table_name = 'MY_EMP'
 21*  connect by prior child_table_name = parent_table_name
SQL> /
ERROR:
ORA-01436: CONNECT BY loop in user data

    If you have a cycle, you have some problems.

    (1) it is a NOCYCLE keyword does not cause the error, but that probably requires an Oracle version which is not so far off support. I don't think it was available at the time 9.2 but I don't have anything old enough to test on

    SQL> ed
Wrote file afiedt.buf

  1   select level lvl,
  2          child_table_name,
  3          sys_connect_by_path( child_table_name, '/' ) path
  4     from (select parent.table_name      parent_table_name,
  5                  parent.constraint_name parent_constraint_name,
  6                  child.table_name        child_table_name,
  7                  child.constraint_name   child_constraint_name
  8             from user_constraints parent,
  9                  user_constraints child
 10            where child.constraint_type = 'R'
 11              and parent.constraint_type = 'P'
 12              and child.r_constraint_name = parent.constraint_name
 13           union all
 14           select null,
 15                  null,
 16                  table_name,
 17                  constraint_name
 18             from user_constraints
 19            where constraint_type = 'P')
 20    start with child_table_name = 'MY_EMP'
 21*  connect by nocycle prior child_table_name = parent_table_name
SQL> /

       LVL CHILD_TABLE_NAME               PATH
---------- ------------------------------ --------------------
         1 MY_EMP                         /MY_EMP
         2 MY_MGR                         /MY_EMP/MY_MGR
         1 MY_EMP                         /MY_EMP
         2 MY_MGR                         /MY_EMP/MY_MGR

    (2) If you try to write on a table and all of its constraints in a file and do it in a valid order, the entire solution is probably wrong. It is impossible, for example, to generate the DDL for MY_EMP and MY_DEPT such as all instructions for a table come first, and all the instructions for the other are generated second. So even if NOCYCLE to avoid the error, you would end up with an invalid DDL script. If that's the problem, I would rethink the approach.

    -Generate the DDL for all tables without constraint
    -Can generate the DDL for all primary key constraints
    -Can generate the DDL for all unique key constraints
    -Can generate the DDL for all foreign key constraints

    This is not solidarity all the DOF for a given in the file object. But the SQL will be radically simpler writing - there will be no need to even look at the dependency graph.

    Justin

  • I made my largest site and how can keep the same size for all other sites?

    I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

    You can use an extension to set a page zoom and the size of the default font on the web pages.

  • How to recharge the remote control for Apple TV 4

    How to recharge the remote control for Apple TV 4

    Recharge your Siri or Apple TV Remote - Support Apple Remote

  • Satellite Pro P - how to disable the hot keys for camera assistant?

    Is it possible, and how, to disable the shortcut keys for the camera wizard?

    The default keys interfere with shortcuts of Microsoft Office (Word) - for example Alt + F9 to show/hide codes field to turns on the properties of camera assistant, Alt + 10 screen settings of camera etc.

    I find this very frustrating.

    Hello

    Of course you can turn it off.
    You must remove the software from the camera in msconfig start up.

    So go to start-run-msconfig online online
    Go to the Startup tab and disable the camera software. Restart the computer laptop and that s all!

    Good bye

  • How to get the code produced for my Windows XP disc if I have the drive?

    Acquisition of Product Code Windows XP

    How to get the code produced for my Windows XP disc if I have the drive?  I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.

    Here are some utilities, which will display your product keys:

    Belarc Advisor: http://www.belarc.com/free_download.html
    (He did a good job of providing a wealth of information.
    However may not detect a key to office, then try one of the other two below)

    Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
    and: http://www.magicaljellybean.com/keyfinder.shtml

    Paid (free demo is available): Recover Keys: http://recover-keys.com/
    "quickly scans your system for more than 3000 + software '.
    and produces a list of software activation keys.

    13 keyfinder programs:
    http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

    J W Stuart: http://www.pagestart.com

  • How to change the default path for documents and settings

    How to change the default path for documents and settings

    I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

    Hello

    I suggest you to download TweakUI, this could help you or get you headed in the right direction
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

    Also this KB could help as well:
    http://support.Microsoft.com/kb/236621

    It will be useful.

  • How to change the product key for Office 2007?

    Original title: product key used.

    When I loaded Office 2007 I used a product key with any additional use.  I try to enter a different product key, but impossible to find how to do this.  Can you please direct me to the correct site to do this?  Thank you!

    Hello

    It would be easier to uninstall it and then reinstall it by using the different product key.

  • How to set the time stamp for incoming mail?

    How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

    Thank you
    Laura
    2.13.2012

    If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

    If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
    https://account.live.com/EditProf.aspx
    and change the time zones for the good...

    Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

    Noel

  • How to change the highlight color for windows 7 (select the file or folder)?

    How to change the highlight color for windows 7 in the aero theme (select the file or folder)?

    You can change the font size because it is not a widget.   To do this:

    1 type dpi in your Start menu search box, and then choose make text and other more or less important.
    2 - Choose a size you prefer
    3 - Click on apply.

Maybe you are looking for