Pavilion dv7-1451nr: have Pavilion dv7 with instances of windows 8.1 there three missing for Base system device driver

I have three instances of "Base system device" with a yello exclamation points, which is an indication that the drivers were not installed.

I followed the advice of DK and copied the info below.

PCI\VEN_197B & DEV_2384 & SUBSYS_30FC103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_30FC103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880

@Obyrotz

Try this one.

http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45180.exe

REO

Tags: Notebooks

Similar Questions

  • I have a 2560p which shows driver missing for 'Base system device '.

    I have a 2560p which shows driver missing for 'Base system device '. Shows the location

    PCI Slot 2 (bus PCI 35, device 0, function 0).

    What is the device and where can I find the driver? Thank you

    Excellent thanks a lot!

  • Pavilion dv6645us after you have installed Windows 7 ultimate x 64 no drivers for base system device

    After you have installed windows 7 ultimate on my pavilion dv6645us laptop, I can't find drivers for base system device, location: 2 PCI Bus, device 5, function 2. Also for another device of the Base system, location: 2 PCI Bus, device 5, function 3, I can't find the drivers. And I have a unknown device, location: on the system as 'good' to ACPI Microsoft. (I don't know the English translation).

    The only thing that does not work on my laptop, I noticed is that I can't write data to my external hard drive (WD essential 1 TB NTFS), I can access the drive and get the data off of it, but when I try to put my computer on the outside driving my laptop goes down (it reacts with difficulty (, all usb devices are disconnected and I have to manually restart the computer by holding down the button for 5 seconds).

    Is this a known problem and the most important is there a solution for this?

    Thanks in advance.

    Hello

    Base system device is for sure your player card.

    Use your Vista drivers for this problem:

    Ricoh 5-in-1 card reader here

    If there are problems with the excavation using compability mode. How al information here.

    How to solve other problems as unknown device?

    Go to control panel-> Device Manager control

    Click with the right button of your mouse on each yellow Panel and choose Properties. Then click on background details and paste hardware ID here. This way we will know what it is.

    Below, an example of how you do it:

  • HP Pavilion dv9894ca: Base system device driver not installed

    I need the drivers for base system devices that have not been correctly installed after I've upgraded to windows 8.1. He originally had Vista on it.

    Hello:

    You need this driver...

    This package contains the driver for the Ricoh 5-in-1 card reader for laptops models and operating systems.

    File name: sp37726.exe

  • Driver missing for basic system devices and the battery for hp Pavilion dv6-2174tx issue

    I have a hp dv6-2174tx with no. WT464PA #ACJ and recently installed 8.1 windows 64 bit. I installed various updates Windows update but still can't find the drivers for the following...

    Bus PCI 4, device 0, function 3

    Bus PCI 4, device 0, function 4

    Bus PCI 4, device 0, function 1

    and some unknown devices with location:

    on PCI Express Root Complex

    on Intel PM55 Express Chipset LPC Interface Controller - 3B 03

    Also my battery does not load from 49 percent. It will show "plugged in, not charging", if I remove the charger, it will start to unload and when I plugin the charger it will charge you up to 49%.

    Help, please...

    Hello:

    Here is the driver for the base system devices.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75510-1&cc=us&DLC=en&LC=en&OS=4063&product=4172062&sw_lang=

    I'll take a guess on the unknown device...

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125640_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    If this does not work, I need to display the hardware ID's for devices that need drivers.

    To find this info, please follow these steps...

    Go to Device Manager, find the other devices category, and then click the device that need pilots.

    Then click on the Details tab in the upper part of the device window.

    Now, you see a drop-down list of property and it is set by default to the Description of the unit.

    Drop down on it and select the second item in the list (Hardware ID).

    After the first string of characters you see in the window.

    I don't know what is the problem of battery, so I can't help you with that.

  • Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

    Hello

    First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

    So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

    In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

    -Device type Other devices

    Reference of the manufacturer- Unknown

                         Location     -         Bus PCI 3, device 1, function 3


    Under device status, it says the following:

                           The drivers for this device are not installed. (Code 28)

    There is no driver selected for the item or a set of device information

    To find a driver for this device, click Update driver.

    Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

    list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

    I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

    computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

    the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

    He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

    I could really use some help here.    Any ideas or help would be greatly appreciated.

    Thank you

    Bryan Ray (Richmond, WILL)

    BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

    Thanks Steve!

    Roger

  • I have a Dell Inspiron 1525 and I need drivers for Base system device after installing Win 7.

    My laptop used to have Vista on it.  I had a big problem with it, so I used fdisk to remove all partitions.  I made an installation FULL of Windows 7 and all is great, but when I go into Device Manager, I show an error with the Base system device.  I did all the updates through Windows Update, as well as update the driver.  Nothing has worked.  Can someone help me with this please.

    According to Dell, your machine has been tested for the basci feature and should work ok...

    http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=7AD62F253414AF5CE040AE0AB8E1492E&docid=364750 Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • Pavilion dv6-2113tx: driver3x and ene cir receiver base system device driver missing for 2113tx dv6 on w7 ultimate

    Hi, I could not connect my pavilion dv6 2113tx Samsung tv using ch I have cable. When I ran the diagnostics I found this driver base system were missing for 3 and an ene cir receiver driver is missing too. The device base system Id are as shown below

    PCI bus4 device0function4

    PCI bus4 device0function3

    PCI bus4 device0function1

    ENE CIR receiver - intel (R) controller interface LPC PM55 express chipset

    could someone please help with these drivers where I can find them and also I did not detect second monitor when I tried to adjust the resolution of the screen

    Hello:

    You need these drivers...

    Basic system:

    This package contains the driver for laptop models JMicron card reader supported and operating systems.

    File name: sp45010.exe

    ENE:

    This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.

    File name: sp44983.exe

    If you cannot detect an external monitor, you probably also need to install the graphics driver.

    This package provides the driver for the NVIDIA GeForce GT 230 M video chip or 320 M in the notebook models and operating systems.

    File name: sp54929.exe

  • Pavilion ZX5151ea: Cannot find the Base system device

    Having problems with a location Base system device driver after ungrading for windows 7 32 bit

    Computer laptop medel's Pavilion ZX5151ea

    Hardware ID's for basic control system are

    PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01

    PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C

    PCI\VEN_104C & DEV_8201 & CC_088000

    PCI\VEN_104C & DEV_8201 & CC_0880

    the drivers on the HP website

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=UK&DLC=en&sw_lang=&product=40961...

    Focus only on windows XP

    Amy help would be much appreciated

    Hello:

    There is no W7 drivers for this model Texas Instruments card reader.

    Try the XP driver.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1&cc=us&DLC=en&LC=en&OS=228&product=409612&sw_lang=

    Try to install manually if auto installation does not work.

  • HP Pavilion dv7-3190em problems with volume band and "base system device" in Device Manager

    Hello

    I just installed Win 7 (64-bit) and my volume control does not work properly. It does not turn the sound up and down, but the blue band is not displayed on the screen.

    In addition, I seem to have a device or devices for which there is no drivers apparently. They are listed as "base system device" x 3 in Device Manager and "unknown device" x 1.

    Thanks for any help.

    Good Hoga

    Hello

    bonhoga wrote:

    Now, I just need to take care of the volume Strip.

    Download and install:

    MediaSmart SmartMenu here (version 3.1.2.2 for 32/64-bit Win7)

    Before installing this software, that you must have installed at least a MediaSmart package software. The best choice will be in my opinion:

    MediaSmart DVD here (version 4.1.4328 for 32/64-bit Win7)

    If you do not use any additional software you can use another product that is:

    3VRX here (version 2.5 for 32/64-bit Win7)

    Note:

    Here is YouTube video that shows what can be done with the 3VRX software.

  • Pavilion dv5 - 1183cl lack of drivers for base system, peripheral devices, battery not charging

    Hello

    I have a HP Pavilion dv5 - 1183cl has been upgraded from Windows Vista to Windows 7 Ultimate (32 bit) and I have a few questions.

    I have four errors appearing in my device manager, three Base system device and an unknown device, and I don't know what they are or where to find the drivers (since I don't know what they are). In addition, the battery will recharge not (it doesn't seem to be anything wrong with her physically). I wonder if the errors below are related to the battery issue. This is the hardware for each error entry ID.

    Basis of the system of the device (bus PCI 6, device 0, function 1):

    PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C & REV_00
    PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C
    PCI\VEN_197B & DEV_2382 & CC_088000
    PCI\VEN_197B & DEV_2382 & CC_0880

    Basis of the system of the device (bus PCI 6, device 0, function 3):

    PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C & REV_00
    PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C
    PCI\VEN_197B & DEV_2383 & CC_088000
    PCI\VEN_197B & DEV_2383 & CC_0880

    Basis of the system of the device (bus PCI 6, device 0, function 4):

    PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C & REV_00
    PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C
    PCI\VEN_197B & DEV_2384 & CC_088000
    PCI\VEN_197B & DEV_2384 & CC_0880

    Unknown device (on Intel(r) ICH9M LPC Interface Controller - 2919):

    ACPI\ENE0100
    * ENE0100

    Someone at - it solutions? Thanks in advance,

    Jason

    Your model has Windows 7 drivers posted. ENE CIR Receiver Driver & JMicron card reader driver, you must:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3802941#N5515

  • Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

    Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

    aarruunn, you might want to try Windows Installer Cleanup utility.

    http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

  • HP Pavilion dv9930us: Base system device in Device Manager

    I have 3 "Base system device" in Device Manager unknown ads.  I've updated from Vista to Win 7.  I read threads that say this may be due to problems with card reader drivers.  I would like to try this, but I don't know where to look for the manufacturer of card reader so I can download the correct driver... anyone with information would be appreciated.

    s/n [personal information]

    p / n: FE779UA #ABA

    Windows 7 64 bit

    Hello:

    You need this driver...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55520-1&cc=us&DLC=en&LC=en&OS=2100&product=3747258&sw_lang=

  • I have wrong associated with a DLL block note as the default program for opening. Can I reset this?

    I have wrong associated with a DLL block note as the default program for opening.  Can someone tell me how to reset it?

    See: http://support.microsoft.com/kb/307859
    TaurArian [MVP] 2005-2010 - Update Services

  • I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

    Original title: DVD problems

    I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?
    3 are. what patch you referring?
    4. this happens to you with some specific discs?

    Reinstall the drivers for DVD player and check.

    1. click on start > run
    2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
    4. When you are prompted to confirm that you want to remove the device, click OK.
    5 restart the computer.
    6. when the computer restarts, the drivers will be installed automatically.

Maybe you are looking for