Pavilion DV7-1451nr: Wireless button stays amber

My pavilion dv7-1451nr turns wireless keyboard blue when I have to reset the motherboard by removing the battery and press the power button / stop seconds, after which I plug in charger to him while leaving the battery and press the power button / stop. After that, I would like to press f10 to enter the bios setup, then I would like to load the defaults, save and exit.

After doing all that I have explained above, the wireless button becomes blue and wireless assistant would be activated and indicates that the wireless is turned on. If I check in the Device Manager, I see the hardware details and driver wireless populated it and everything should work fine, but once I restart the computer, the wireless button would refuse to start. There is orange. If I try to check the State of the material status and driver WLAN on Device Manager, they would be is more filled it more and wireless assistant will refuse to start. If by chance he started, this would indicate that the wireless is turned off by the Device Manager.

I had tried uninstalling the wireless LAN driver and reinstalled just in case the problem came from the software side but not solution. Just this afternoon, I have decoupled from the computer and removed the card WLAN, dusted it and replace it back, but the problem persists.

The type of wireless network card is Atheros AR5007 802.11 b/g WiFi adapter. I noticed something this afternoon, however, after having checked the service manual for the computer, I realized that there is specific types of the wireless card compatible for specific regions. For example, the number of appropriate wlan spare parts which must be on my computer is 582564-002 and have this with references with the number of spare part of wlan on the wireless card available on my computer that begins with sps 452..., I realized something was wrong. I'll leave that to stop you guys from HP, but I really need a solution to this problem very fast because it's really annoying me. Thank you.

Hello @LL_Cool_J,

Thanks for the information!

I don't know what you mean, when he asked if the model is 50xx or 40xx. Confirming the WLAN Module is a little difficult, because there are several manuals maintenance for this model.  I was able to refine the selection a bit, by comparing the numbers of spare part for hard drives.  Based on this REPAIR, the WLAN Modules you have listed, 582564-002, 593836-001, must be compatible.  However, I don't see the Atheros as option in this manual.  To be on the safe side, you can contact our telephone support HP.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

Have a great day!

Tags: Notebooks

Similar Questions

  • HP Pavilion Sleekbook 15 TS: Wireless button stays amber!

    I have a Sleekbook and yesterday the button Wireless 'stuck' on amber. I can press it repeatedly and it takes more just my laptop in and out of the plane.  I rebooted, reset the default BIOS settings (who worked the first few times, but not working now), I've updated the driver for the wireless adapter, the wireless switch driver and the network driver - which did not help. I restored to an earlier date (3 weeks) who helped a bit but then the system did a update and I had to reboot and now it's just like it was back.  Please someone can help me with that I'm not at home, do not have full access to the internet (I use my mobile data for this message) and do not have an own USB so a complete reset of the BIOS is out of the question.  Because I don't have wireless internet or a printer is close I can't download stuff or print documents, I need when the computer is turned off.    My computer data: product name: HP Pavilion Sleekbook 15 TS product number: thank you D4L77EA #ABU Windows 10 64-bit edition.

    Hey @Deolvroo,

    Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

    I understand that you encounter some problems with networking on your HP Sleekbook. I'd be happy to help you with that.

    The following pages are useful for troubleshooting wireless connectivity problems.
    Troubleshooting wireless network and Internet (Windows 10)

    In addition, you can watch the the power management of your wireless adapter:
    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Forget a network (Windows 10)
    Forget wireless network profiles in Windows 10

    Reset TCP/IP on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the Winsock Catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from http://support.hp.com/us-en/drivers , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an Ethernet connection:
    Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    Please hold me.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon.

  • Laptop Pavilion dv6-3118sa wireless button & button mute don't work once installed windows 8.1

    I just installed windows on my Compaq Notebook Pavilion dv6-3118sa 8.1 and my wireless button and button mute does not work anymore can I do to make it work again?

    Hello

    Try the IDT driver on the link below.

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59654.exe

    Kind regards

    DP - K

  • Wireless light stays Amber ' f12' ' PC portable hp ANVY m4' D1D581UA #ABA' 8 64-bit Windows

    I have hp ANVY m4 notebook pc window 8 64-BIT ' present light wireless AMBER establish f12 visits of wihte' but still can connect to the internet... !

    This problem makes me uncomfartable because I own my laptop afew days ago ' so I need help how to resolve this problem.

    REGD.

    Hello Masa.  I understand that you encounter some difficulties to turn on your wireless network.

    The wireless button works slightly differently in Windows 8 in previous versions of Windows.  It activates the 'airplane Mode' instead of turn turn off/on the wi - fi radio only.  Try the following to make it work as you would expect.

    1. Since the display type of Metro 'wireless '.
    2. You should see 'settings' on the right.  Select this option and it will fill several elements associated with wireless on the left side of the screen.
    3. Select "wireless" in this section.
    4. You should see a few options.  One being "Airplane Mode" and the other two being a power switch for bluetooth or wireless.
    5. Ensure that these two are turned on when airplane mode is turned off.
    6. Save the changes and reboot.
  • HP Pavilion dv7-4190us: touchpad buttons do not work

    Last week, I received two HP Pavilion dv7-4190us laptops from Amazon. Both had the same problem: the buttons on the touchpad do not work. If you hit one of them, the result is the same if you hit the main part of the pad. Affecting the buttons in a particular function does not work. I checked in the Information System, which showed the touchpad as having 0 buttons. I spent over 2 hours on the phone with HP support, but they were unable to resolve the problem. I sent two computers laptops back to Amazon, ask for a refund. It's a shame that these otherwise great computers are rendered by this problem, making them unacceptable for me.

    It turns out that the buttons on the touch pad work. The result of this 'problem' is my confusion over the operation of these buttons. On this touchpad (which is not like the others, I've used so far), the buttons are flush with the surface of the touch pad, and they do not respond to touch, but only in the same way as a button on the main part of the pad. The fact to the specific button functions, to firmly press a button. I found this by reading the answer to another user who has reported the same issue. I hope this can help to avoid confusion of someone else in the future.

  • Pavilion DV6 6c14nr: Wireless button does not work

    Has taken the plung and improved my DV6 Win10 laptop to see how it works.  Had to do a clean install, because no upgrade would not work.

    After installation, the wireless button does not work.  LED stays red all the time, and when I push it, it activates / deactivates the airplane mode.

    Check the support site HP for this PC, downloaded and installed the driver wireless Win8 button (sp59835) and it does not work. Button LED stays red.

    Searched these forums and found another driver (sp64043) from the button for Win10 wireless driver and installed it.  Still does not work.

    Information on equipment is: ACPI\HPQ6001\2 & daba3ff & 0

    The details for the wireless button said drivers this devide requires additional installation

    Unless I can get the wireless button to work, I'll be forced to go back to Win7.

    Help, please.

    UPDATED - so others find this post know what works!

    Restored image backup Win7.

    Disconnected the LAN cable and activated the wireless button.

    Win7 removed and properly installed Win10.

    Wireless button works NOW!

    So basically, if the wireless is turned off before the Win10 install, it remains disabled and then nothing will allow it.

  • HP pavilion dm4-2180 wireless button does not illuminate

    Following this element thead (http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-pavilion-dm4-2180-bezel-repl... I ended up going in a store of the local computer where they fixed the problem of the screen. I have it powered by the store and everything seemed ok, just that when I got home realized that the wireless button does.

    Checked well the post on the forum about similar issues, but may not know what the problem is.

    1. default bios does not resolve the problem

    2. the correction with hard power the laptop, remove the battery and pressing the power button for 30 seconds to drain the capacitors nor

    3. the button is always orange, if I press it for a few seconds, the message "unrecognized usb device" is displayed

    4. the wireless adapter does not appear in Device Manager, or I get the error message on the current arrangements (only on the unknown device in the usb controllers)

    Is it possible that is a material error, when technicians open the computer the wireless card has not properly been connected?

    Hello @PedroAAndrade,

    Welcome to the Forums of HP Support!

    I came across your post about the WiFi problem and wanted to help!

    It is possible that the problem may be hardware related.  You can try to check the WLAN Module, to see if it properly connected.  You can use this guide to help you, if necessary:

    HP Pavilion dm4 Entertainment PC - Maintenance and Service of Guide (Chapter 4, Page 40-42).

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • HP Pavilion dv7-1000ea Wireless problems - Urgent

    I just do a fresh install of Vista 32 bit on this laptop Pavilion dv7-1000ea.

    I have trouble getting the wireless operation.

    Device Manager is not recognizing that there is a wireless inside the laptop adapter, even if there is.

    The wireless light is orange. I could not do it turn blue.

    I installed ALL necessary drivers - nothing is reported in Device Manager does not.

    I have updated the BIOS and also tried it revert to an older version to see if that makes a difference or not.

    I assured that wifi antennas are properly fixed inside the computer.

    I tried to ensure without wire is activated in the Setup (F10), but there is no option for it!

    I tried to use HP Wireless Assistant to turn it on, but it won't let me open the utility.

    I tried enabling wireless through the Windows Mobility Center Control Panel, but there is no settings for wireless in there.

    Can anyone help?

    Sorry everyone, I managed to fix it. I took out the wireless card and put it again and then it was recognized and began to work.

  • Pavilion dv7 - no wireless or bluetooth after power surge?

    Hi all

    I'm trying to diagnose a failure on a Pavilion dv7-4130sa running Windows 7.

    The WiFi was working fine until yesterday afternoon when I think he cut a power surge or a very brief power. It was not enough to reset clocks or turn off the TV, cable box, etc, but I had to reset the wireless router.

    Central heating also stopped working, due to a fuse and the defective pump - but maybe it's just a coincidence.

    Now, the wireless in the system tray icon shows a red cross with Windows indicating an error message...

    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing.

    I know this isn't the router as my phone and netbook both work more wireless. I was thinking of doing a system restore, but I was wondering that if bluetooth and wireless cards are defective, this does not solve the problem.

    Any help or advice would be much appreciated.

    try to reinstall these network adapters in Device Manager or recovery manager

  • HP Pavilion DV5 1010tx wireless button not working not

    My wireless button has stopped working since I upgraded my Vista 64 - bit of Windows 7 Pro 64 bit. Advice please?

    The BIOS I'm currently using is 3603 worm F.21

  • Pavilion DV7 the touchpad buttons not responding

    My new dv7 (select edition, windows 7-64 b) knows a few difficulties, right click. When I connect the USB mouse with buttons right and left I can right click but areas to the left and make touchpad a right-click differ at all. When I type in the box to right click, he left snaps; When I type in the box to left click, it left clicks. When I tap anywhere on the pad, he left clicks. I installed the latest synaptic drivers, the device properties window tells me that I am using synaptic clickpad V7.4. The tab buttons has a right click button Setup do secondary clicks and all the listening and the buttons are enabled, but still no right click. Looking at some pages of support on the hp website (http://support.hp.com/us-en/document/c00678194), I noticed that the screenshot they show from the menu 'tapping' seems different from what I have on my computer. Namely, that i miss the section "tap zones".

    If anyone can shed some light on this mystery, I would be very grateful.

    -Sam

    To start with you are tapping on right click area or pushing down? new touchpad on laptop new HP design is this button clicks are now integrated into the touchpad itself, but you will still need to make a physical click. Typing in the box click it will operate as a left click as it would activities tap the touchpad function...

  • Pavilion dv7-6102ea: Wireless for dv7-6102ea driver does not

    Hello

    My wireless network device does not work.

    I downloaded the recommended drivers for my laptop model, but they do not work.

    I have a dv7-6102ea,

    and my network hardware id is:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C

    PCI\VEN_14E4 & DEV_4727 & CC_028000

    PCI\VEN_14E4 & DEV_4727 & CC_0280

    Please help me!

    Hello:

    You need the driver for this device...

    FTP://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

  • HP dm4-1165dx, I recently installed windows 7 pro. my wifi button stays amber now? Need help.

    I recently installed Windows 7 Pro on my HP dm4-1165dx.  Now, I can't my wi - fi to work?  Amber light stays?  Please, I need help.

    That worked very well.  Thank you very much.

  • PAVILION DV7 QUAD WIRELESS UPGRADE CARD?

    My dv7 quad came with the intel centrino wireless-n 1030. I tried to update the intel 6235 n and it does not start and tells me that this module is not compatible. I have a photo and will try to download.

    1 iam looking for an 300mbps and dual band wireless card. If anyone can help my find what works that would be great.

    In fact, I found a card that works and which has the 2.4 and 5 ghz wireless...

    RALink RT3592 adapter WiFi 802.11a/b/g/n 2 x 2

    I ordered and got it and currently have used it for almost a year now... like this map and the love of my 5 GHz

  • HP Pavilion dv7 7077ez wireless for windows 8 does not work after upgrade to windows 7 64 bit

    I have the broadcom card. I have try all the drivers and I still cant install drivers I see on household also setup.rul 342 of the installation error wireless start won't start. What should do?

    Hi Emilinator,

    More than likely HP won't to material support for Windows 8 on any system purchased before October 1, 2011.  Most of the Windows 7 drivers work in Windows 8.

    You can try this pagewhich provides measures to solve the problems of connection to broadband for Windows 8.

    Check out this page to see if your computer has been tested by HP with Windows 8.

    You can run the Upgrade Wizard, which will scan your PC and report on what is currently installed on your PC is compatible with Windows 8.  This guide was updated for Windows 8 provides lots of information which is needed for all those planning the upgrade.

    Good luck

Maybe you are looking for