Pavilion dv7 3162nr: upgrade of updates to driver for laptop after Windows 10

Similar Questions

• Replacing hard drive for laptop after Windows update failure

  The internal hard drive is not now on our Pavilion dv9700 CTO Windows Vista 64-bit. I would like to replace it with a hard drive from equivaltent, but I am unsure on how to provide for the operating system (we want Windows7 instead of Vista) and productivity software (essentially MS Office Pro). What is the best way to go about this? I have Win7 CDs I have installed on another computer that has also died and gone out of service, so I prefer to use them rather than buy a new license. Ditto for the OEM Office supplied with this notebook.

  Please provide suggestions that you will need to perform this type of upgrade. We must keep costs at a minimum right now and since nothing else seems to be failing on the 9700 repalcing the part and reconfigruing seems the best way to go. Thanks in advance for any help.

  You can replace it with this number of HP spare. It will be smaller, slower, and 3 times more expensive. Computer laptop SATA hard drives are interchangeable, generic, industry standard. If you buy the one above and it doesn't work PM me and I'll buy it for you at your expense.

• BIOS does not detect not hard drive for laptop after the setting of the default BIOS settings.

  I had my 14.04 installed Ubuntu in my laptop in a reader named «Notebook hard drive» a pre-installed Windows 8. Today I put the default BIOS settings in my phone and when I rebooted it and tried to use Ubuntu by pressing 'F9' key and choosing from the menu of the BIOS I found my 'Notbook HDD"option missing. My disk of Ubuntu is still there, but I have no way to access it. Is there a way I can get it to work?

  Try turning off secure in the BIOS and then start by restarting the laptop.

• HP Pavilion DV7 - 4183CL: upgrade of RAM 16 GB for HP Pavilion DV7 - 4183CL

  Hi all

  Am so confused with all the flying on tech stuff.

  You will need to upgrade to a 16 GB RAM installation to get the best out of the game juice. Am running 6 GB (4 + 2) stock the installer which simply do not cut it. Please can you guide me what RAM should I buy?

  I can't give a sense of the markings on my current RAM. It reads - 4 GB 2RX8 PC3 - 10600S - 9 - 10 - PS... WHT is to say all? The new 8GB Rams should I buy read exactly the same?

  Would appreciate if you could help me. Thanks in advance!

  Here is the Service Manual:

  Manual

  Your memory tops out at 8 GB, I am sorry to say. But wouldn't you do better game by installing 16 concerts, anyway. You can help video performance a little bit making sure that memory is in mode dual channel which means you need 2 identical modules. If you need to mix the 2 gig you have in there and get a module 4 GB like the one you already have.

  See page 62 for instructions.

  Memory 4 GB 599092-001

  http://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1460915079&SR=8-1&keywords=599092-001

  Games just need a sufficient amount of system memory and the upgrade to 8 concerts has a meaning. The real workhorse in the game is the video card and there is nothing you can do to upgrade you. You have the Radeon 5470 switchable video of AMD, which is well quite obsolete but in no case a terrible portable video system.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion dv7 OS upgrade from Vista to Win7

  Need help please...

  Buying the Win7 OS in a shop in the only way for me to upgrade my laptop?

  Or is there a possibility to download the Upgrade via HP or MS?

  Finally, with the upgrade, are currently available for download drivers (HP Pavilion dv7 - 1273cl)?

  Thanks in advance for your help.

  Dog

  Hi for dog,

  Windows 7 has been available for download on the Microsoft Store until the latter part of 2012 - however, now, you will need to buy an installation disc from a store.

  Windows 7 drivers are available for your laptop - see the link below.

  Windows 7 software & drivers - 64-bit Version.

  Windows 7 software & drivers - 32 bit Version.

  Best regards

  DP - K

• updated my driver for my Ethernet controller and now it does not work

  Original title:

  Network network network Ethernet device

  I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
  to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
  a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

  Hello

  You can try the following steps and check if it works:

  Method 1:

  You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Method 2:

  If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

  It will be useful.

• HP Pavilion G6-2260sh card reader and video driver for win7 64 bit

  Hi people!

  I need drivers for HP Pavilion G6-2260sh video and card reader driver for win7 64 bit

  Can someone help me?

  An error message appeared so I tried the above utility to describe what driver I need.

  Semms that it's the final solution: 13-4_mobility_vista_win7_win8_64_dd_ccc_whql

  Now really perfect thanks!

• DeskJet 3050 has: updated printer driver for Windows 10

  I can't update my driver for Windows 10 (don't know if its 32 or 64 bit).  HP support to download drivers updated seems unable to detect my printer even if bluetooth is turned on for both. Any thoughts?

  Hello

  First your printer doesn't have Bluetooth? How do you connect your printer now? Please download the software and the following driver and install on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

  (Select Wireless when install.) Yet once it doesn't have Bluetooth).

  Kind regards.

• 2000-2312TU HP: updates to driver for Windows 10

  Hey,.
  I just have a question on the driver updates...
  HP has released updates to driver for Windows 10 because I have a problem with my Wifi and its solution is likely to update my wireless driver...
  Any help will be appreciated!
  Kind regards

  Saboor.

  No, it was for the wifi button was not working for some after the update to windows 10 I guess.

  And you can open the Device Manager and check the updates here for the wireless card.

• I can't watch DVDs on my computer it say I need some update the driver for the video card

  I can't watch DVDs on my laptop it tell me I have to install a driver for the video card update

  Hello

  It seems that you try to update the drivers for DVD. I offered to you to update the video card reader.
  Try update video card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/video-cards-frequently-asked-questions

• Can't get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.

  Original title: driver HP DeskJet 5440 windows 7 32 bit

  I was unable to get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.  I also was unbale to find your compatibility Center.  Is there a link were I can down-load the driver directly from.

  Tony,

  In fact, I assumed that yours was always supported by HP * but I understand now that it's not [so I guess that it is more than 10 years because it is their general support period].  {* Mine is a DJ 2540 and is only a few years so I thought a 5440 DJ must be more recent}

  I see that HP gives you general instructions on installing drivers in http://support.hp.com/gb-en/product/hp-deskjet-5440-printer-series/445466/model/445467/document/c01796879/ I checked Microsoft update catalog service and nothing found for HP Deskjet 5440, that's why you're not having any success with the generic instructions, giving you these instructions seem to presuppose the existence of a Windows driver for this specific model.  {HP must have given up your specific model before that this catalogue has been compiled, because hardware manufacturers are those that connect to their drivers inside}

  However, my suggestions may solve your problem or maybe not.  They are simply the steps that seem more likely to be successful.  Personally, I'd a system image before you try each of these suggestions so that you can go back to square one if something goes terribly wrong.

  Suggestion 1 - go to the devices & Printers dialog box, click Add a printer, select HP then select HP Deskjet 5400 series [the sequence in the list is awkward, this entry is about 10% of the way to the bottom of the list], click on Next and follow the procedure of menus at its conclusion.  Even if it's completely successful, plan to run my Suggestion 4 below as well in case of future need.

  Suggestion 2 - out whatever the driver that shipped with your printer in the first place, try to install in compatibility mode [right click on its executable, click on the tab compatibility , the value of the check box for run this program in compatibility mode for... and select a BONE the printer worked correctly with.]  Then go to the executable, right-click and select run as administrator.  This idea is not frivolous, until he blew something internally, I was using my 1999/2000 HP Deskjet 1220C successfully on Windows 7 x 64 for four years [despite the HP user forums which implies that this was not possible].

  Suggestion 3 - go back to the HP site to http://support.hp.com/gb-en/drivers/selfservice/hp-deskjet-5440-printer-series/445466/model/445467 but select 10 Windows as your operating system.  In the results, the Diagnostics Utility Tools point contains now a setup generic [hppiw.exe] who described "HP for Windows printer setup wizard was created to help users Windows 10 download and install the software solution most appropriate for their printer and newer HP HP Windows 7 and Windows 8/8.1.   Simply run the tool and follow the on-screen instructions. " Download & run [run as Admin] of this file.

  Suggestion 4 - Connect to an Admin-level account first, then, using IE [there than IE], date back to the Microsoft update service catalog and search for HP Deskjet 5400 series.  It will give a lot of results, then click on the driver name in the left column of title to see details for each potential choice [especially if it is 32 or 64 bit].  The top of the list is [32-bit] Microsoft Update for HP Deskjet 5400 Series driver dated June 21, 2006.  [You might also download & file the second element, the 64-bit version, just in case you change computers in the future]  Add the chosen driver [s] to the "trash" then download - you will be asked to select a file to download first {it is at this stage that the process would be a break without further explanation or any error if you had not been connected to an Admin-level account before launching IE}.  I think that these drivers also work with Windows 10 thus, in the hope that your printer works for the years to come, it would be well worth your copies of maintenance of them filed there ready for your next computer use.

  Proposal 5 - go [back] to the forums of user HP Deskjets & find 5440.  See if any of the other suggestions can help you - unless you have already looked through them all the more relevant [I realize that you have been here once already as one of the threads that I just watched was of you].

  We know, in advance, which of these suggestions will lead to the best possible solution.  So please come back to this forum to explain what happened when you tried the.  Your experiences will benefit all users of HP Deskjet 5440 who come here looking for advice.

  Good luck

• When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  Hello

  When you say "live update" are you talking about Windows Update?

  If so, you can go to the ATI site and download the latest driver for this video card. Here are the download links for the drivers later, Windows 7, 9.9 32-bit and 64-bit version for the Mobility Radeon 3000 series.

  ATI Catalyst Mobility Radeon Display Driver 32-Bit

  ATI Catalyst Mobility Radeon Display Driver 64 bit

  Hope this helps

  Thank you for using Windows 7 Ronnie Vernon MVP

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• NVIDIA will update the driver for quadro 4000 for mac? When?

  NVIDIA will update the driver for quadro 4000 for mac? When?

  Not sure when / if they will make an update of the Quadro 4000 driver, but I've been running the current driver with no problems.

  Have you problems? If Yes, please explain.

  Here are links to the latest version of the driver:

  http://www.nvidia.com/object/MacOSX-CUDA-5.5.28-driver.html

  http://www.nvidia.com/download/driverResults.aspx/68439/en-us

  Thank you

  Peter Garaway

  Adobe

  Premiere Pro

• new hard drive for laptop

  I have a laptop dv7-3140el and HD samsung HM641JI 640GB 2.5 "SATA 5400 RPM (to replace car failure). To buy a new hard drive I have to take the same or I can take 7200 RPM instead of 5400? What technical specifications should I look for when buying a hard drive for computer laptop dv7-3140el? I wouldn't make a bad purchase!

  Sorry for my bad English

  Hello

  Here are a few points to note when replacing your HARD drive:

  You are not limited to any particular drive manufacturer.

  The speed of rotation of the disc can be 5400 RPM or 7200 RPM

  The new drive HARD should be at least the same capacity (or slightly more is okay) as the original drive - mounting a drive smaller than the original often causes risks with recovery media.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  If necessary, the procedure to replace the hard drive begins on Page 47 of your maintenance & Service Guide.

  Kind regards

  DP - K