Pavilion dv7 - 4167 portable ca: USB driver

Similar Questions

• Where are the drivers for HP Pavilion dv7-3065dx notebook PC USB?

  I just had a really annoying couple of hours to find out that the next step in my quest to get all four of the USB ports on my HP Pavilion dv7-3065dx Entertainment Notebook PC working again is to reinstall the USB driver.  The problem is this driver seems to be hidden safely in a place where dangerous people like me can't get to work.  Can someone tell where I can get this driver?  Please, humor me - I just fell off the turnip truck and I did what is obvious to search "drivers and support" area of HP one USB for a HP Pavilion dv7-3065dx Entertainment Notebook PC running win7 64 bit driver.  He isn't here.  So where is it?

  You don't need a special usb driver. It is part of the main chipset driver and eventually the operating system itself. If you have problems with the usb ports does not work, it is most likely hardware. However, one thing you can try is going into Device Manager, all that can be uninstalled, the uninstall usb devices, restart and allow drivers to recharge. When I have a laptop with usb problems I boot from a Linux Live CD or a pen and see if the usb ports work with Linux. If yes then your Windows is corrupted somehow. If this isn't the case, then it is material.

• HP pavilion dv7 4077cl need new hard drive

  I need a new hard drive for my laptop HP pavilion dv7 4077cl entertainment.  The old man is a Toshiba MK6465gsx.  What would be compatible?  Maybe more now I have 640 GB of storage like most.  Can someone help me?

  Hello

  Yes, the HARD drive become more fat and more (capacity), becomes also more small - actually thinner - (dimension) AND cheaper too. You can use more (once again - ability) HDD from reliable suppliers/manufacturers. 750 GB or 1 TB of a WD HARD drive would be a good start - please stay with the one who has more cache and fast (7200 rpm or more).

  My suggestion: replace it with a SSD and put a larger HARD drive on the second span.

  Kind regards.

• Pavilion DV7 4085-sf and graphics driver Windows 8

  Hi guys,.

  can someone help me with a graphic driver for my laptop Pavilion DV7 4085-sf?

  I have this videocard Ati Mobility Radeon 5470 and I not find the drivers for Windows 8 on this card.

  Thank you verry much!

  His work! Thank you very much!!!

• Pavilion 15 t-p100 CTO: USB driver for Win7 x 64 missing, also 'unknown device '.

  Decommissioning of Win8.1 to Win7 x 64 Pro. Most of the drivers; opportunity of Lenovo for Realtek Ethernet controller and works well. Two unresolved problems remain under 'other devices '.

  "Universal Serial Bus (USB) Controller" has no driver. Seems strange, like "Generic hub USB", "Intel 8 series Enhanced Host Controller #1-9C 26", "USB Composite Device" and "USB root hub" are all installed and that responded to the questionnaire. " Tried sp61293.exe to another post, but OS unsupported.

  "Unknown device" listed. Properties display these fields: Hardware ID 'ACPI\HPQ6007' and ' * HPQ6007 ', CONFIGFLAG_FAILEDINSTALL, \Device\00000054, CM_DEVCAP_SILENTINSTALL capacity 00000020, DevNode status 01802400 DN_HAS_PROBLEM DN_DISABLEABLE DN_NT_ENUMERATOR DN_NT_DRIVER, problem code 00000012, ACPI\PNP0A08\0 parents, brothers and sisters (many), install error E0000203, other fields are bad GUID and comments of unknown device.

  Computing Nice, friendly OS needs.  Thanks for your help.

  Hello:

  You can use all the W7 x 64 drivers and software (except the BIOS and firmware files) the p000-15 t on your model.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

  The unknown device needs this driver...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. Software HP 3D DriveGuard protects the hard drive by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp69011.exe

  There are two pilots usb3 related here.  I believe that you need it...

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp68928.exe

• Pavilion dv7 2120 ev: SSD HARD drive

  Hello

  I have a 2120ev dv7 with 500 GB Serial ATA-150 - 5400 RPM laptop and I want to update to SSDS.

  Is this possible?

  If so, what SSD are compatible?  Could I use SSD SATA2 or SATA3?

  Thank you

  Yes, you can install a 2.5-inch SATA SSD instead of HARD drive. A simple procedure to install and many options of migration/copying of software. Your system is SATA 2, but the latest SATA 3 SSD will be "downclock" to work properly on your system and the speed increase is always amazing. Very little real difference in normal use between 2 SATA and SATA 3.

  You would find a SATA 2 SSD anyway and improvements are being made constantly so that you don't want an older SATA 2 SSD, unless somebody gave it to you. They also tend to be smaller that the cost of the SSDS off the charts not long ago. They are always on the expensive side but do it where everyone can and should have one. Get 250 and preferably at least one concert a concert 500 or 512, which now is about $150 on a good day.

  Post back if you need help most.

• HP Pavilion DV7 - 4077cl. Second hard drive

  My DV7 has space for a second hard drive.  I buy cables to connect?

  Hello

  You definitely need disk hard mounting kit, which will have the screws, cable connector and caddy... it can be ordered here... http://PartSurfer.HP.com/search.aspx?SearchText=605415-001

  Good luck

• Pavilion dv7 Notebook PC: AMD graphics driver

  I upgraded my OS from Windows 7 to Windows 10 laptop and now I get the following message:

  No AMD graphics driver is installed or the AMD driver does not work correctly. Please install the AMD driver appropriate for your AMD hardware.

  When I go on the AMD website and don't go through the instructions, I get a message that no compatible driver can be found.

  Can anyone offer advice?

  @cribguru

  This seems to be your only option.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy3&OS=Windows%2010%20-%2064

  The specifications of your laptop.

  http://support.HP.com/us-en/document/c02664905

  Your laptop has not been tested for W10 upgrade.

  http://WWW8.HP.com/us/en/ads/Windows10/not_tested.html?JumpID=cp_r163_us/en/pc_cons/win10/update/Findmyproduct

  REO

• Win7 won't start no-Pavilion dv7-6059eo-a the hard drive failed? Contact HP?

  Hello

  I have already experienced some minor problems with my HP laptop, as crashes and freezes and error startup. Now, yesterday I came home vacation and discovered that my PC did "feel well" when I used it. Sound had been delayed and delayed, processes and programs froze frequently, including the Task Manager. I decided to just restart and went for a shower, half an hour later when I came back to my PC it was trying to close the session, without success. I used the power button to shut down physically, and when I tried to start it up, I was allowed to choose whether to start the PC normally or in "safe mode", as expected. I started normally and it has frozen on the 'Starting Windows' screen, the animation wouldn't even start.

  I waited several minutes for Windows to start and, eventually, windows cursor appeared on the screen, but it was obviously the wrong resolution (much bigger (and wider than what is proportional) and fuzzier than normal), then I got a blue background (However, this was not blue, it was like a wallpaper) and the come command prompt thingy indicating exactly what :

  Microsoft Windows Script Host Version 5.8

  Copyright Microsoft Corporation. All rights reserved.

  REM model:

  Legend of the REM: Hitachi HTS725050A9A364 ATA Device

  REM DeviceID: \\.\PHYSICALDRIVE0

  REM SCSIBus: 0

  REM SCSIPort: 0

  Scores of REM: 4

  REM PNPDeviceID: IDE\DISKHITACHI_HTS725050A9A364___PC40CH0A\5 & DDFF 3299 & 0 & 0. 0.0

  REM

  REM

  REM [RESULT]

  REM couldn't Scout because could not detect 2 hard drives on this system

  C:\System.sav\util\MBRINST. / Ini EXE C:\System .sav\util\MBR. INI/U/Q

  ECHO MBRInst returned %ERRORLEVEL% > C:\system.sav\logs\MBRINST. JOURNAL

  I leave the PC for half an hour, and when nothing happened, except at the prompt closing itself, I rebooted, it the same way as last time. This time when start I had to choose between 'start Windows normally' and 'Start Startup Repair (recommended) '. I chose the option recommended and expected (because I used to get these before the crash too). But ultimately the same black screen and the enormous-too-big-cursor appeared, then he went blue and then the command line came, stating the same message as I wrote above.

  It is, essentially, as far as I got with the PC after the evening of yesterday and today. I also noticed wave, repetative sounds coming from inside the PC, looks like a frog, very very small is trapped inside. I tried the F8 menu at startup and chose to start in "safe mode" but there is no difference.

  I would be totally grateful for help, because it was a ~ $1400 spent and I got it for a few months...

  Thank you for reading

  My

  Hello

  Error 303 would indicate a hard drive failure - this is also compatible with the freezing issues you describe leading up to this event.

  Your best option isto contact HP and arrange for the hard drive replaced under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

  

• Pavilion dv7-6b32us left side usb 3.0 communicates is not after I installed windows 7 pro.

  
  

  Well well well... big dummy me. The driver that I needed was here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&DLC=en&LC=en&OS=4063&product=5189524&sw_lang=

  This is the NEC driver and it's on THE SAME PAGE I was looking at 37 times! Hahahaha. Well, I feel stupid, but it is fixed. Once again, thanks Daniel for trying to help!

  Problem solved.

  Brian Mc

• Pavilion dv7 4053 cl: Pavilion dv7 4053cl adding second hard drive

  I replaced with success the stock HDD in my laptop with an SSD.

  I want to continue to use the old HDD in the laptop well, and it seems that I have a second drive Bay HARD in which HARD drive can adapt. I have not, however, see a SATA connector on the motherboard for a second HDD connection.

  There is a SATA connector to the disk HARD primary (symbols of disc 1, marked on the plastic) and there are two connectors near the RAM, which seem not to be SATA, and my optical disc drive is connected.

  Am I missing something, or is there is no place on the motherboard to connect a second HARD (well, or SSD) via SATA drive?

  GrubenM wrote:
  I replaced with success the stock HDD in my laptop with an SSD.

  I want to continue to use the old HDD in the laptop well, and it seems that I have a second drive Bay HARD in which HARD drive can adapt. I have not, however, see a SATA connector on the motherboard for a second HDD connection.

  There is a SATA connector to the disk HARD primary (symbols of disc 1, marked on the plastic) and there are two connectors near the RAM, which seem not to be SATA, and my optical disc drive is connected.

  Am I missing something, or is there is no place on the motherboard to connect a second HARD (well, or SSD) via SATA drive?

  Here's your Guide to maintenance & Service.

  It's the package, you need to add a 2nd hard drive: http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345

• HP pavilion dv7-4177 nr: crashed hard drive

  I have extra need to read comments on the boards.  I understand that I must make a new hard drive.  Also read you can buy casing external hard disk and plug in another computer to see if you can make files that cannot be lost. It doesn't matter if connect you to a desktop as opposed to another laptop?  Also, I know once you replace the hard drive your software has disappeared.  I don't no laptop back.  Is there a way to get a recovery disk? I'll lose everything that has been preloaded when I bought the laptop as beats audio light scribe, assistant wireless hp, amd graphics card, etc.  I hope that I am clear.  I know that I can replace the drive myself.  I was wondering if I'll be able to back up all files.

  Thank you

  Thank you for your help.  I ordered the kit from recovery disc.  See what's happening.  In the future will save my files.  You never know.  Never had any problems with my computer hp laptop so far.  The only thing I replaced to the battery and the power cord.  It's good to know I can come and ask a question and get help.

• Pavilion dv7-4167: blue box admin password

  Hello, I have the same problem as many others in a blue box seems to want the admin password and the usual password does not work. My code that appears after 3 attempts is 79076718. Does anyone know what code to use? I tried the code in several of the above, but they do not work. Prob because my key code is different. Thank you in advance!

  Enter: 66954338

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

• HP Pavilion dv7-6c02sm USB 3.0 only works with the 2.0 speed;

  Hello

  My HP Pavilion dv7-6c02sm has 2 USB USB 3.0 ports on the left site of my laptop. Currently, I installed these "sp55102" driver - Renesas Electronics USB 3.0 host controller driver

  When I connect my WD 1 TB USB3.0 ports chip I just get the message that he could run faster if I connect through a Super speed USB3.0.

  I tried all ports and all give me the same answer. I googled for a manual and myself made sure that my USB 3.0 are on the left side. And ports give me the same notification so I think it will be a driver problem. Could not find a better then sp55102.

  When I copy files, the left USB ports work at a lower rate than normal USB 2.0 on the right side.

  On the side USB 2.0 right arround 25 Mb/s and the left a USB 3.0 starts at 25 and plunges in 13-15 Mb/s

  I formatted my drive and installed new firmware for my external hard drive, but it does not solve my problem so I'm pretty sure it's a driver issue, but I can't find a more suitable, more recent and better driver.

  Product: A9X57EA #BED

  Help, please. Thank you

  Hello

  Ok... I've solved the mystery

  After hours hours of research online I thought that it is mostly a problem of windows 7 because windows updates are not installed to the end. In the end only USB worked with 3.0 but there was an optional windows update install and atfer install the optional update (which is dealing with something) the two USB 3.0 working at a speed of 120 MB/s

  Also, you should check your chipset on the following link

  http://www.Intel.com/p/en_US/support/idyp

  If you use the latest version on the drivers to install Renesas Electronics USB 3.0 host controller driver. I found this to be the last version USB3.0_allOS_2.1.28.1_PV

  
  So if anyone has the same problems with his speed USB3.0 and make the message "this device can perform faster if you connect it to a Super speed usb 3.0" is really the solution. You need to update your system with windows update and by that I mean, you want to be rushed to insatll everything to the system and upgrade your windows to the possible limit maximum!

• Pavilion DV7-3125sf buttons to quick launch DRIVER failed

  Hello

  recently I formatted my PC "HP pavilion Dv7-3125sf" because of hard drive problems

  now I'm on (Windows 7 Professional x 64)

  and I downloaded all the drivers and multimedia software of HP 'support & drivers '...

  everything is cool otherwise buttons to quick launch... normally if you change the volume there show a Volume bar, now the volume change but there is no ban on Volume...

  -How can I download this (in the HP drivers & support there is no software for this)

  Thank you!

  Hello

  Download and install MediaSmart SmartMenu on the link below and save this to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45140.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  When it finished, restart the computer and check if you have now the volume display.

  I hope this helps.

  Best wishes

  DP - K