Pavilion dv7 - 4183cl Notebook: finger swipe to connect to the computer in Windows 10

Similar Questions

• HP Pavilion n072sy-15 Notebook PC - where to find all the drivers for Windows XP and Windows 7

  Who knows where to find all the drivers for Windows XP and Windows 7 for HP Pavilion n072sy-15 Notebook PC?

  Hello:

  XP will not install or run on a PC with an Intel 8 series chipset, so you need not be concerned with finding drivers.

  Here is the link to a template that you can use the W7 x 64 bit drivers from.

  When you install the graphics drivers, first install the Intel HD graphics driver, reboot and then install the graphics driver nVidia.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=6521374

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...

• Unable to connect on the computer of Windows 8

  I used my computer this morning.  When I went to sign this afternoon it says the password is incorrect, and I was able to reset my Microsoft account.  Reset the password using another computer, I am still unable to connect using the old password or the new password.  I am currently in line with the machine connected watch.

  Now I've lost the full use of the computer as it wont let me sign in.

  Help please.

  Hi Donna,.

  Thanks for posting your query in Microsoft Community and my apologies for the late reply.

  It is unfortunate that you are facing this problem. I would ask to refer to suggestions provided by Cliff_N responded on 7 December 2012.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• HP Photosmart more B210: printer HP B210 connected to the computer with windows vista is not print documents

  Have had the above printer and computer wireless without any significant problems of printing until yesterday when I couldn't print liked anything from my computer. I disconnected the son / the power of my printer and router, waiting a few minutes and then reconnected the accounts.  Then I restarted my computer and retries impression with unsuccessful results. I then run the wireless network Test and the report does not show any problem.  Anyone have any suggestions to solve this problem.

  Thank you

  Hi @kattok001

  I see that you have had the minimum printing problem in the past, but suddenly you cannot print at all despite your efforts. I'd be happy to help you with this!

  Let's start our trip with HP print and Scan doctor. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• HP pavilion dv7-6b55dx - line quarter inch Horizontal gray in the middle of the screen

  Recently bought a HP pavilion dv7-6b55dx notebook from Best Buy.  Recently, the screen started to have a quarter inch gray horizontal line in the middle of it.  Gray line has more grey lines inside.  6 month warranty just expired.  Y at - it 'easy' for this solution or the screen is just broken?

  It is usually the screen.  LaptopScreen.com has replacements for usually less then $60, which includes shipping. To be sure that it is the screen, connect an external monitor and make sure that there is no grey lines on the external monitor.  If there is, then it is assumed the video chip. Move fourth screen of the laptop and see if the lines disappear.  If they do, then it is the cable from the motherboard to the screen.

• Pavilion dv7 6123 cl: need drivers to connect to internet

  I had to replace the hard drive on my Pavilion.  After replacement, I installed Windows 7 to a new OS installation disc.  I don't have the original installation disc.  The computer works fine following the installation, but I can't connect to the internet.  Apparently, Miss him a driver, probably more than one.  When I try to connect to the internet, told me that my network card is missing a driver.  Because I can't online I can't run an automatice updating.  Suggestions to 1) what drivers I need, 2) how can I get them downloaded to another computer, to transfer to a USB key, and 3) how and where I install once that I get them?

  Hello

  Please use the following driver for LAN (wired connection):

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55105.exe

  and the driver for the wireless:

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54900.exe

  You can find all drivers from the following link:

  http://support.HP.com/us-en/product/HP-Pavilion-dv7-entertainment-notebook-PC-series/5082216/model/5118970/drivers

  Kind regards.

• Flashing LED and black screen HP Pavilion dv7 - 3111ea Notebook PC/entertainment

  HP Pavilion dv7 - 3111ea Notebook PC/entertainment

  Processor i5

  4 GB OF RAM

  NVIDIA Geforce 2 GB VGA

  OS: WIndows 7 64 - bit

  I have a BLACK SCREEN (NOT SURE if IT REALLY TURNS ON or not) once I turn it on. The NUMBER of CAPS & LOCK lights flash three times with three second window and automatically shutsdown and turns on automatically. The LEDs blink with three seconds apart, keeping the machine on constantly.

  After checking according to this link

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01732674&product=1132551

  Checked

  Adapter CA / CC -works great

  BATTERY - does not load

  IT worked well had no warning on the battery (after a few days after the above mentioned problem I realized the battery does not charge)

  Interpreted Power Reset

  RAM (Memmory modules) -replaced New One (4 GB)

  It is based on the sequence of flashing of LED Memmory module errors. Reseating the modules memmory (2 GB + 2 GB) doesn't seem to work so I replaced it with a new (4 GB).

  I hope that this has nothing to do with the battery. This does not solve the problem.

  Appreciated if someone could help. Thanks in advance

  Hello

  Unfortunately the "blink" codes are not always an accurate indication of the actual error, so this may be one hardware failure of another component on the motherboard.

  Try the following.

  Shut down the laptop, unplug the AC adapter and remove the battery.  Follow the procedure begins on Page 52 of your Interview Guide & Service to remove the battery from the RTC.

  Press and hold power for 30 seconds and then leave the laptop for 15 minutes.

  Exchange your module memory 4 GB in the other available slot.  Reinsert the RTC battery, replace the cover, plug the power adapter ( Let the main battery at the moment ) and try to start the laptop.

  Any change?

  Kind regards

  DP - K

• HP Pavilion dv7-7001sg: HP Pavilion dv7-7001sg has BIOS Ver F.29. but the show f.0Une HP Web site

  HP Pavilion dv7-7001sg has BIOS Ver F.29. but HP shows f.0Une Web site.
  Use f.0Une or F.29?   If F.29 where can I find it?

  (writing of the Germany)

  Hi @gdneon,

  Thank you for visiting the HP Forums! I have Germany.

  I took a quick glance to your HP Pavilion dv7-7001sg Notebook and worried with what BIOS version, you should be on. Your f.0Une system as of March 1, 2016 is the correct version, you should have.

  Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.

  Thank you.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• iPod classic connects to the computer

  Hello

  I have an iPod classic, since 2005.

  It will charge from the grid, but when you plug it into the computer it does nothing... Does not make a noise, does not load... Nothing, only thing that happens is that when you disconnect the computer screen lights illuminates... tried all USB ports, still is not, tried 3 computers, does not work on any...

  so I tried 2 more iPods, an iPod classic in 2004 and it worked fine. Tried an iPod nano of 2007 once again absolutely worked well...

  really annoying me now that I want to sync music on the classic...

  tried resetting the iPod, tried to run in the other mode keeping the home button and menu, press the button home-and play... None of them worked either

  Jake

  When you "recharge sector" (which I assume means an adapter of any), are you using the docking cable that you use with the computer?  When you connect iPod from 2004 and 2007 iPod nano to the computer, you use the same USB docking cable used with the iPod in 2005?

  Is the power supply adapter ("hands") accomplice of old load powering FireWire supported, not USB load?  Accessories older load use FireWire instead of USB charging, which has a different voltage and uses different "pins" on the dock connector.  An iPod from 2005 (probably a 5th generation "video" iPod) to connect to the computer via a USB port, but it can recharge using the USB or FireWire power.

  If you can confirm that the port host USB cable to connect the iPod in 2005 is good, my guess is that the 2005 iPod dock connector will not properly connect to USB power.  It can be worn or damaged.  Therefore, it does not connect to the USB port on the computer.  However, it always connects to FireWire, so she received the adapter (which feeds the FireWire).

  Use a flashlight to look inside the iPod dock connector, to visually check for damage, corrosion, dust or debris.

• How long it take restore iphone when connecting to the computer

  How long it take restore iphone when connecting to the computer

  Is based on the amount of data to restore. How long do we have?

  GB

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• Perform a hard reset when you are connected to the computer?

  Hello

  my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.

  Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.

  Thank you

  Jesse

  You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,