Pavilion dv7-4190us: dv7-4190us works Windows 10 ethernet and wifi Broadcom 4313GM does not

Installed Windows 10 on Pavilion dv7-4190us.  Now, the Ethernet card provides Internet access and Broadcom 4313GN Date 27/05/2013 Version 6.30.223.99 will not access Internet via wifi. (It worked with Windows 8.1.) I did find a suggestion from HP. I'm looking for a suggestion to the user on how to get the Broadcom 4313GN for wifi on Windows 10 operation.

Angrist response to my issue shows a pilot Boardcom 5... level. I decided to lower my driver PC Boardcom 6... level 5... level. HP provides the dv7-4190us, a wifi Boardcom to the 5.60.350.11 network driver level. This network driver is provided to the customer support HP - software and Driver Downloads to the file the name sp49541.exe for the dv7-4190us. I installed this update, rebooted, disconnected from the ethernet and the wifi worked.

Tags: Notebooks

Similar Questions

  • After hybernation, all usb and wifi mobile devices does not work

    Original title: Hybernation question
    After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

    Hi Mirza.Shanawazbaig,

    1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

    2. do you have security software installed on the computer?

    3. did you of recent changes on the computer?

    4 when was the last time it was working fine?

    Method 1

    See the below Microsoft article and try the steps mentioned, check if it helps.

    Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

    http://support.Microsoft.com/kb/871233

    Method 2

    I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

  • I've upgraded to Windows 7 Ultimate and now my system does not connect to internet and my built in webcam does not work.

    help please

    I tried to upgrade the verson windows seven that came on my computer vaio to windows 7 Ultimate edition. now I can't connect to internet, my built-in webcam does not work, the menu drop-down selector top of page disappeared and I do not see where there is no improvement in the operating system. That's happened?

    This thread was created in the Windows Update forum.  The moderation of Microsoft answers team has moved to forum installation, upgrade, and activate.  Thank you.

  • After clean install of Windows 7, Netflix and Internet TV plugin does not work on Windows Media Center.

    Original title: problem with Windows 7 Media center

    Is there anyway that I can replace the whole C:\Windows\ehome? There is a permissions issue, and I can't find a way to change the permissions...

    The only reason I want to do is I did a clean install of windows 7 and the plugin TV Pluzz.fr and the internet do not work on this computer and it seems to be no work around. But I have a PC where WMC works fine and I can replace the entire record of WMC and it should work like the other PC (I think).

    I could do if I ran linux or something, but I'm looking for something simple or a fix to this problem with WMC.

    Hello

    Thanks for the reply.

    It is too bad to know the steps in my previous post did not help to solve the problem.

    I would like to inform you that starting from September 20, 2012, the experience of Internet TV is no longer available. You can consult the following Microsoft article that has the same information:

    Cannot open Internet TV in Windows Media Center

    http://support.Microsoft.com/kb/2801382/en-us

    For problems with Netflix, I suggest you follow the steps in the Microsoft article and check following:

    http://support.Microsoft.com/kb/972496/en-us

    Also applies to Windows 7.

    Please answer us on the State of the question to help you further.

  • Xmarks is functional? It didn't work for a week and the installation wizard does not work.

    The last time worked Xmarks was on 25 October. I am connected correctly and it tries to synchronize, but never finished. Even the Xmarks Setup Wizard does not work. It is a very useful addon in the past one I hope he'll return to work.

    I had this problem too. I'm running Firefox 25.0 and used Xmarks 4.2.1. Sync would not end. I downloaded Xmarks 4.2.3 from Xmarks web site (not the site of Mozilla Add-ons that apparently has 4.2.1) and now everything looks OK.

    Mark

  • can't see the photos sent by e-mail. I'm with windows media player and it says it does not support the format, or the file is corrupted.

    the Player Windows media doesn't let me see the photos sent by e-mail. says unable to read file [oxcood1199]. State id oxoooooooo. does not support the format or corrupted file. the file is not corrupted. can not send email. just started using a hotmail account.

    Install Windows Live Photo gallery from the link below

    http://explore.live.com/Windows-Live-Photo-Gallery-XP

    Good luck!!

  • Sound does not work on the computer and the volume icon does not appear in the system tray.

    Original title: my sound icon has disappeared from the taskbar.  The Control Panel indicates the sound is on, but I can't hear anything.  What happened and how do I get my sound back?

    Have a Toshiba laptop that always displays the lower icon audio in the right hand of the screen.  The sound icon has disappeared and I can't hear anything.  I check Contol Panel and sound, and he says it works and is turned up... but I can't hear a thing.  How can we retrieve icon of audio and how I can hear sound?

    Hello

    Thank you for your response.
    I did a "System Restore" and the icon reappeared, and the sound now works.
    I restarted the computer a couple of times, but that does not solve the problem.  Also, I went into the Panel and checked to see if the speakers were working and were lit, and they were.
    It wasn't until I did the restore of the system that the icon reappeared and the noise began to work again.
    Thank you.
  • Why does not work does not correctly?, work the first day and after 48 H does not work.

    Why the APPLE TV to stop working 48 hours after installation

    You will need to provide more information

  • I've updated windows and now my computer does not connect to the wireless network.

    I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

    Hello
     
    You can follow below link that can help you to solve your problem:
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
  • Pavilion dv7-4180: upgrade Windows 7 to 8

    Hi all

    I have a HP Pavilion dv7-4180 using Windows 7.  I bought a Windows 8 of Microsoft and the Bill says:

    "Earn 8 32-bit/64-bit English VUP DVD."

    Online Microsoft provides this statement (quoted):

    «Download and install Windows 8.1 to Windows 7»
    1. sign in to your Microsoft account
    2. in the menu of left, click downloads, subscriptions and product key
    3. find your purchase Windows 8.1, and then click Download
    4. If a dialog box appears, click Run to start the installation
    5 follow the instructions in the installation wizard to complete the installation of Windows 8.1 "

    Before thiis upgrade, is there advice that I should follow to avoid an honest mistake?  For example, losing a feature because of the upgrade?

    Thanks for your comments.

    AtAF

    AtAF wrote:

    Peer

    Very practical advice.  Device Manager to see 'pilot' listed, or should I navigate on the control panel?

    Thank you.

    AtAF

    You can do this and see if there are drivers that manufacturing has to W8 for that specific material. But you should check the site driver from HP for your P/N and see whether they have or W8 drivers list. Don't forget the older laptop after 2012, the chances of HP with W8 drivers will be slim to none since they do not include support for older hardware.

  • Please find Driver for BCM20702A0 for hp pavilion dv7-4285dx for windows 7

    Hello

    Please help me find the driver for BCM20702A0 for hp pavilion dv7-4285dx for windows 7.

    I'm going to each site, trying to find a driver for BCM20702A0 because I tried to install a 4 (badge) bluetooth dongle on my laptop but it says 'impossible to update software' when I try to run the installer from the manufacturer's website. Then, I go to devices and printers and try to solve the problem with the bluetooth dongle and it says "BCM20702A0 is not a driver" I tried to download broadcom and updated centrino HP network driver for my laptop page up-to-date, but that does not solve the problem. All these other drivers that I find are for other computers laptops and even still, I can't navigate to links posted on this site, it brings me right back to the search page.

    Thank you

    Alex

    Hello:

    Try this driver...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131427-1&cc=us&DLC=en&LC=en&OS=4063&product=5273735&sw_lang=

  • the light around the touch pad on my pavilion dv7 stopped working. Why?

    Hello

    The light around my touchpad on my HP Pavilion dv7 stopped working. I didn't load anything new in the months and the light has just stopped working. Can someone tell me why?

    Thank you

    Stephen

    Hello Stephen,

    Try to press and hold the fn key and press the space bar.

    Kind regards

    DP - K

  • Pavilion dv7-6101eo works but does not start.

    My laptop got a cup of black coffee on the keyboard.

    I have cleaned up a bit, disassemble the entire laptop, same cpu, added new money and put the brand new togeather. Started and everything worked. Close the computer laptop domw - dead. Could not start without flashing, nothing. Repeated picking hand everythung once again and began. Works perfekt press start and go. So this time I made a recovery and reinstalled everything.

    The keyboard does not everywhere, a, s, d, f, e, l and Swedish letter o does not work very well. I don't have much contact for helmet properly not work either - you get a bit of his, but a little in the speakers and phones. I forgot to check the sd card reader, but here, it is located in the corner of a speaker.

    Onece I disassembled except mobo and this card reader and then the laptop is not started. I had to do it all again and he began. So now I'm a little confused to what it can be?

    It does not remove batteri, pushing start button. Not 15 seconds - not even 2 minutes. I know that battery, power cord works fine, cd, network, hard drive, memory, fan, cpu - everything works and yesterday the laptop running 24 hours without dysfunction at all. Programs installed and revived over and over again. And after all that I closed the laptop the way you should. And - he won't do it again?

    There is a possibility that some power is left in the drive cd-card or something that stops the laptop to boot? Or is it enough that the keyboard is malfunctioning? I don't understand what it is with the disassembeling process that makes the laptop to start.

    It's not fun to have all take part whenever you want to start your computor ...

    Looks like the coffee did more damage as you thought.

    You should have dismantled it and used contact cleaner everywhere where coffee could go.

    The next step is difficult for most people: allow to dry for at least a day outdoors in a dry place without danger... It is unfortunate that you don't have that.

    Consider looking for a replacement book.  A motherboard and keyboard options, less the cost puts you upside down against the current value of the laptop.

  • HP Pavilion dv7-3190em problems with volume band and "base system device" in Device Manager

    Hello

    I just installed Win 7 (64-bit) and my volume control does not work properly. It does not turn the sound up and down, but the blue band is not displayed on the screen.

    In addition, I seem to have a device or devices for which there is no drivers apparently. They are listed as "base system device" x 3 in Device Manager and "unknown device" x 1.

    Thanks for any help.

    Good Hoga

    Hello

    bonhoga wrote:

    Now, I just need to take care of the volume Strip.

    Download and install:

    MediaSmart SmartMenu here (version 3.1.2.2 for 32/64-bit Win7)

    Before installing this software, that you must have installed at least a MediaSmart package software. The best choice will be in my opinion:

    MediaSmart DVD here (version 4.1.4328 for 32/64-bit Win7)

    If you do not use any additional software you can use another product that is:

    3VRX here (version 2.5 for 32/64-bit Win7)

    Note:

    Here is YouTube video that shows what can be done with the 3VRX software.

  • Laptop Pavilion dm1 4010us and beats audio Panel does not work.

    I have a pavilion dm1 laptop 4010us, running windows 7 64 bit and beats audio Panel does not work.  I click Start, Panel, Sound and the Beats Audio Control Panel icon is there, but nothing happens when I click on it, so I can't change my audio settings.  Help, please

    Hello

    Try to use Recovery Manager to reinstall the IDT HD Audio Driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

    http://support.HP.com/us-en/document/c01868333

    After reinstalling, restart the laptop.

    Kind regards

    DP - K

Maybe you are looking for

  • How can I make the noise of Logic Pro come out in mono?

    I'll use a cube mixture Avantone, alone, connected to the left or right of my interface. I need to hear the mix in mono but I hear only one side. any advice welcome?  do I need a cable special split and use both outputs or y at - it a mono button in

  • Since upgrading to OS XEl capitan 10.11.6 canon printers does not work

    Hello everyone, I went to use my canon printers today, (canon pixma ip4000 & canon Pro9000 MKii) and the system would go to print and it would come in place with the printer is not connected message. The printers were lit, and that they were connecte

  • disabled user continues to appear at the beginning

    Hello I recently installed the operating system after replacing the hard drive, so the installation was completely new to using the Internet.  Every time turn on the laptop, I get the user to choose two: Mine and comments. I went into the menu in sys

  • Programmatically add or remove slider

    Hello I use slide System Horizontal pointer. And I want to add the slider programmatically. I know how to add this manual, but I want to add/remove the cursors programmatically. Could you please help me?

  • Sony Bravia KDL55W800C

    BRAVIA KDL55W800C requires the software update for the dual display photo and recording via the USB port in Australia. The reference guide tells me that the update will be available in July 2015. Went to channels site several times and told me softwa