Pavilion dv7-6b32us - max and the type of RAM I can install it?

Hello

For the pavilion dv7-6b32us, which is the type and maximum RAM I can install?

The manual says it can go up to 16 GB, but I don't see that 8 GB (4 x 2) available for sale in the world.  We do not know also what type I need.

Thank you...

Hello

Please check this:

http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+dv7+series/Pavilion+dv7-6b32us-upgrades.html

You can buy from them or use the information to buy elsewhere

Kind regards.

Tags: Notebooks

Similar Questions

  • Speed max and the capacity of RAM of Pavilion dv6

    Hi guys,.

    I don't know, you have been asked before, but each post I find little answers my question, but not exclusively:

    What is the maximum speed and the RAM capacity can put in my Pavilion dv6 (Beats edition)? Completely factory standard

    I want the fastest and most large amount of RAM I can get (I'll make heavy photo editing) and then I put a SSD in as well?

    HP Pavilion dv6 Notebook PC

    Windows 7 Home Premium 64-bit Service Pack 1

    Intel Core i3 - 2330 M CPU @ 2.20 GHz

    RAM:

    Slot 1: 2 GB SODIMM Hynix 1333 MHz

    Slolt 2: 4 GB SODIMM Samsung 1333 MHz

    Radeon (TM) HD 6490 M

    Motherboard: 17F9 10.5 A

    BIOS: F.1B

    Sincere greetings

    Justin

    You are the very welcome, Justin.

    Yes, that's correct. 2 x 8 GB PC3-10600 memory.

    Memory will not run any more quickly than the FSB of the processor. Your CPU FSB is 1333 MHz.

    For example: If you have installed 2 x 8 GB PC3-12600 (1666 MHz) memory, he would go only to 1333 MHz.

    I don't think that there is no outside but except DDR5 memory in video cards.

    But you can not mix DDR memory types, because they work with different voltages and the notches are cut at different places on DDR, DDR2, and DDR3 memory modules to prevent someone to install the bad memory in the PC and damage memory, motherboard or both because of the different voltages they run on.

    Best regards

    Paul

  • HP Pavilion 17-ab008no: the amount of RAM I can install on my own on the HP Pavilion 17-ab008no

    Hello!

    The HP Pavilion 17-ab008no comes with 12 GB of RAM.

    I would like to know how many RAM slots it altogether, if all is used from the beginning and so if I can install more memory RAM on my own later and how much in this case.

    Good bye.

    Hello

    Max is 16 GB:

    Two SODIMM slots, are not accessible or scalable client:

    Dual channel support ● DDR4-2133

    ● DDR4-2400 dual channel supports (bridge of DDR4-2133)

    Supports up to 16 GB max memory system with the following:

    ● 4096 MB (4096 MB x 1)

    ● 6144 MB (2048 MB x 1 + 4096 MB x 1), no support for 32-bit operating system

    ● 8192 MB (4096 MB x 2) or 8192 MB (8192 MB x 1), no support for 32-bit operating system

    ● 12288 MB (8192 MB + 4096 MB), no support for 32-bit operating system

    ● 16384 MB (8192 MB x 2), no support for 32-bit OS or Windows® 7 Home Basic Edition

    Your machine already has 16 GB:

    http://support.HP.com/BG-en/document/c05200869

    Kind regards.

  • Vault to Oracle set up rules to restrict the user and the type of application that can connect

    Oracle 11 g 2 (11.2.0.4.3)

    RHEL 6

    Hi all

    We are experiencing a few problems to configure the following condition:

    Users A, B, and C will not be able to connect via SQLPLUS.

    So I took note of the political examples on how to Set Up database Vault (Doc ID 972477.1() -section restrict access to the database (sqlplus) unwanted tools:

    However, it doesn't evaluate the rule in the rule set correctly. The rule set is as follows:

    DVF. F$ MODULE! = ' SQL * MORE AND DVF. F$ SESSION_USER NOT IN ("USERA", "USERB", "USERC")

    This rule allows all users to connect except those defined in the rule. And it applies also to the developer SQL (and all other connections). If I change to be 'IN' he also allows users in the list, but no one else. In addition, somewhere I think it evaluates it as "OR" rather than "AND". What I want to do is:

    IF user IN ("USERA", "USERB", "USERC") AND SYS_CONTEXT ('USERENV', 'MODULE') = ' SQL * MORE

    SO, do not allow the user to connect.

    Note: The factor (MODULE) has been created by me and her expression is SYS_CONTEXT('USERENV','MODULE')

    Any help on this would be greatly appreciated.

    I tested these rules and they work:

    (1) ((upper (sys_context ('userenv', 'module')) like '%%') and (not in sys_context ('userenv', 'session_user') ('A', 'B'))) or ((upper (sys_context ('userenv', 'module')) like ' % %') and DEVELOPER (not in sys_context ('userenv', 'session_user') ('A', 'B'))))

    (2) ((upper (sys_context ('userenv', 'module')) not like ' %PLUS%')) or ((upper (sys_context ('userenv', 'module')) not like ' % DEVELOPER %'))))))

    I'm blocking users A and B to connect from SQL * more and SQL Developer

    -set the rule defined for all THE TRUE evaluation

  • HP Pavilion dv7-6b32us fan hums when fast running

    I have a HP Pavilion dv7-6b32us and within these last few months my laptop heats up enough easy and when the fan starts very quickly it will sound and it vibrates enough that I can feel it a little bit in the top left area of the laptop, the only way it stops is if I type this field quite difficult. I guess this means that bearings or something on the fan are slaughtered, and it must be replaced. I tried to clean the area fan of the best that I can (if there ever a lot of dust on the inside), but if I remember the last time I took apart, I can't make it very easily without removing the motherboard, so I have to clean the fan with the lid on. Is there a way to solve this problem, or if not, where can I get a new fan?

    CaseyF wrote:

    I have a HP Pavilion dv7-6b32us and within these last few months my laptop heats up enough easy and when the fan starts very quickly it will sound and it vibrates enough that I can feel it a little bit in the top left area of the laptop, the only way it stops is if I type this field quite difficult. I guess this means that bearings or something on the fan are slaughtered, and it must be replaced. I tried to clean the area fan of the best that I can (if there ever a lot of dust on the inside), but if I remember the last time I took apart, I can't make it very easily without removing the motherboard, so I have to clean the fan with the lid on. Is there a way to solve this problem, or if not, where can I get a new fan?

    Hello

    Take a look at the service guide.

    http://h10032.www1.HP.com/CTG/manual/c03043778.PDF

    Your laptop must have a shared program Intel 3000 then choose the heatsink / fan for Intel UMA memory:

    http://www.eBay.co.UK/ITM/666392-001-new-HP-dV7-heatsink-fan-/360733774145?PT=LH_DefaultDomain_0&hash=item53fd689141

    How a manual with pictures from page 46.

  • Bluetooth on HP-Pavilion-dv7-6b32us

    I try to connect headphones for my laptop HP-Pavilion-dv7-6b32us. I have two different models that I'm trying to connect to my laptop: Nextware Sonic and Järv, both through bluetooth headphones.  I tried "Add a device" via the Control Panel, but the devices don't pair or appear.  I can not find bluetooth in the Device Manager.  Are there any drivers, I can download the software on the computer I can activate for this problem or I have to buy a bluetooth dongle?

    Any help would be greatly appreciated.
    Thank you

    The specifications do not indicate that your model has bluetooth so yes, if you want, you'll have to get a dongle.

  • Pavilion dv7-6b32us: that means start diagnosis failure ID QC6C51-5R67HW-QFPH4K-402BO3?

    HP Pavilion dv7-6b32us laptop

    Start-up took like 15 minutes so I did some diagnostics and received a failure id QC6C51-5R67HW-QFPH4K-402BO3

    The operating system could be zero, but not sure.

    What is the error? Can't seem to find anything online. Very much appreciate your help.

    Thank you!

    It seems that the hard drive has failed/is a failure and should be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  • Upgrade processor for HP Pavilion dv7-6b32us

    I have a

    HP Pavilion DV7-6b32us,

    Motherboard: HP 1802
    BIOS: HP F.1C 23/01/2013

    Processor: Intel Core i7-2670QM CPU @ 2.20 GHz (4 c 8 t 2.8GHz/3.1GHz, 2.8 GHz BMI, 4 x 256 KB L2, 6 MB L3)
    Socket/Slot: CF PGA988

    Memory controller: controller DRAM Mobile HP Core (Sandy Bridge) 100 MHz, 2 x 8 GB DDR3 SO - DIMM 128-bit, 1.33 GHz

    and I would upgtradee processor. I have an Intel i7-3820qm think about it and I was wondering if it works or if there is a better choice?

    Hi Sholling,

    Welcome to the community of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I see that you have a question about upgrading your processor. On page 89 and 90 of Maintenance and Service of Guide , you will find a list of compatible processors. The Intel i7-3820qm is not on the list, but there are several processors in the list. You'll also find instructions on the replacement of the processor.

    Thank you

  • Need old BIOS for HP Pavilion dv7-6b32us

    Hello

    I have a HP Pavilion dv7-6b32us which has BIOS installed F.19. I want to try an older version of the BIOS if possible. Can someone please post links to the old BIOS for this laptop. Laptop was purchased in the United States.

    Downgrade bios procedure advice would be appreciated.

    Thank you.

    Hi all
    When I posted my original question, only bios F19 is available for download. I checked the HP website again today and to my surprise now previous two versions of the bios are also available for download.

    In case a person at HP has decided to post links to older versions of the bios after reading these forums, then its totally awesome. I am impressed.

  • HP Pavilion dv7-6b32us - no sound

    Pavilion dv7-6b32us Win 7 64 bit.

    There is no sound from the internal speakers.  Last update of IDT Audio received 11/3.  Didn't notice any sound shortly after this.  OBD reported no sound internal speakers.  Do I need an updated driver?

    Thank you!

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • Pavilion DV7-4069WM missing on the PartSurfer for parts search

    I'm looking into purchasing to a Pavilion DV7-4069WM, and I was looking at the type of RAM it uses. I used to work for HP, so I am very familiar with HP PartSurfer (via http://partsurfer.hp.com ). I have however questions locate this laptop out there to find the related parts. I tried to get two using search and hierarchy, and I found the part number for the machine using the hierarchy but no result when you click it.

    I also tried the parts through http://h20141.www2.hp.com/hpparts/ store, where once more no results don't come to try to search for the product (tried by product name and product number).

    Does anyone know if there is another way to find which parts are used for the machine in question? Thanks in advance.

    There are two ways.

    The easiest way is to do a search of RAM upgrade.

    The results that I trust are companies like OCZ, Crucial, Kingston and other companies high level due to their compatibility guarantee, on which I found this update memory for laptop that you asked.

    Another way is to go to the laptop support portal and use the manual section to fid the Guide to maintenance and service. The guide will provide even a part number of HP for the memory clean module type.

    Best regards
    ERICO

  • can a pavilion dv7 run on just the power plug

    Cannot run my Pavilion dv7 3173 it without the battery even if the power supply cable light is on. The system starts in about a second, then turns off. My battery needs to be replaced, but FDI like to run the laptop without it.

    Hello:

    The battery is sometimes so dead that the only way to run Notepad is to remove the battery and run from the power of a/c only.

    So, if your question relates to "Is it possible to do", then the answer is Yes.

  • downloError code is 417 and the type of error is - 60

    I'm trying to download the creative cloud for a long time and I get error 205.

    Read the file DLM.txt in %temp%\AdobeDownload\ I have the following error details:

    23/05/15 17:16:04:406 | [ERROR] |  |  |  |  |  |  | 4352 | Is the windows error code - 12002

    23/05/15 17:16:04:406 | [ERROR] |  |  |  |  |  |  | 4352 | Error 12002 in WinHttpQueryDataAvailable.

    23/05/15 17:16:11:649 | [ERROR] |  |  |  |  |  |  | 3832. Download job: could not validate segment (2)

    23/05/15 17:16:11:649 | [ERROR] |  |  |  |  |  |  | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE

    23/05/15 17:16:11:906 | [INFO] |  |  |  |  |  |  | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60

    23/05/15 17:16:31:745 | [ERROR] |  |  |  |  |  |  | 7144. Download job: could not validate segment (0)

    23/05/15 17:16:31:745 | [ERROR] |  |  |  |  |  |  | 7144. the download work (0) could not run. The State of the work is STOPPED_STATE

    23/05/15 17:16:31:903 | [INFO] |  |  |  |  |  |  | 2284 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60

    23/05/15 17:16:33:579 | [INFO] |  |  |  |  |  |  | 2284 | decrement the number of threads. the number of active threads is now 1

    23/05/15 17:16:37:741 | [INFO] |  |  |  |  |  |  | 6204 | the thread incrementing. the number of active threads is now 2

    23/05/15 17:16:46:943 | [ERROR] |  |  |  |  |  |  | 3832. Download job: could not validate segment (2)

    23/05/15 17:16:46:943 | [ERROR] |  |  |  |  |  |  | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE

    23/05/15 17:16:46:990 | [INFO] |  |  |  |  |  |  | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60

    23/05/15 17:17:10:211 | [ERROR] |  |  |  |  |  |  | 7144. Download job: could not validate segment (0)

    23/05/15 17:17:10:211 | [ERROR] |  |  |  |  |  |  | 7144. the download work (0) could not run. The State of the work is STOPPED_STATE

    23/05/15 17:17:10:273 | [INFO] |  |  |  |  |  |  | 2284 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60

    23/05/15 17:17:32:978 | [ERROR] |  |  |  |  |  |  | 3832. Download job: could not validate segment (2)

    23/05/15 17:17:32:978 | [ERROR] |  |  |  |  |  |  | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE

    23/05/15 17:17:33:677 | [INFO] |  |  |  |  |  |  | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60

    23/05/15 17:17:33:677 | [INFO] |  |  |  |  |  |  | 6204 | decrement the number of threads. the number of active threads is now 1

    23/05/15 17:17:35:988 | [INFO] |  |  |  |  |  |  | 2284 | the thread incrementing. the number of active threads is now 2

    23/05/15 17:17:48:657 | [ERROR] |  |  |  |  |  |  | 7144. Download job: could not validate segment (0)

    23/05/15 17:17:48:657 | [ERROR] |  |  |  |  |  |  | 7144. the download work (0) could not run. The State of the work is STOPPED_STATE

    23/05/15 17:17:49:207 | [INFO] |  |  |  |  |  |  | 2284 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60

    23/05/15 17:18:01:272 | [INFO] |  |  |  |  |  |  | 6204 | the thread incrementing. the number of active threads is now 2

    23/05/15 17:18:09:338 | [INFO] |  |  |  |  |  |  | 6204 | decrement the number of threads. the number of active threads is now 1

    23/05/15 17:18:14:549 | [ERROR] |  |  |  |  |  |  | 3832. Download job: could not validate segment (2)

    23/05/15 17:18:14:549 | [ERROR] |  |  |  |  |  |  | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE

    23/05/15 17:18:14:608 | [INFO] |  |  |  |  |  |  | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60

    23/05/15 17:18:18:400 | [INFO] |  |  |  |  |  |  | 2284 | decrement the number of threads. the number of active threads is now 1

    23/05/15 17:18:29:306 | [ERROR] |  |  |  |  |  |  | 7144. Download job: could not validate segment (0)

    23/05/15 17:18:29:306 | [ERROR] |  |  |  |  |  |  | 7144. the download work (0) could not run. The State of the work is STOPPED_STATE

    23/05/15 17:18:29:838 | [INFO] |  |  |  |  |  |  | 2284 | New attempt to overrun of the count of ERROR_SEGMENT_VALIDATION_FAILURE - 11

    23/05/15 17:18:30:557 | [INFO] |  |  |  |  |  |  | 7144. the download job (0) is cancelled

    23/05/15 17:18:38:820 | [ERROR] |  |  |  |  |  |  | 3832. Download job: could not validate segment (2)

    23/05/15 17:18:38:820 | [ERROR] |  |  |  |  |  |  | 3832. (2) download task failed to run. The State of the work is STOPPED_STATE

    23/05/15 17:18:39:539 | [INFO] |  |  |  |  |  |  | 6204 | an intermittent error. Try again now. Error code is 417 and the type of error is - 60

    23/05/15 17:19:47:136 | [INFO] |  |  |  |  |  |  | 6204 | * Download the file acheves.* *.

    My OS is Windows 8.1

    Thank you

    Error 205 is a validation for the Segment failure while downloading the file from the Adobe server.

    See link above and try with recommendations:

    -Disable anti-virus and firewall temporarily and try to download.

    -Check the Hosts file and see if there are all the entries in Adobe, if so remove.

    -If you use a connection without wire/Wifi, try with wired Ethernet, wireless connections are nonlinear and often the question failed Validation of Segment, due to the decline of network signals.

    -C' is maybe not the possible solution: If you already use Ethernet connection cables try different Internet connection with the ISP company.

    -If you are connected to the corporate network or behind proxy, make sure that Adobe ports are on a white list or allowed on the network firewall.

    If all are agreed:

    You can check the link below:

    Whenever I try to download the creative cloud, I get an error with error205.

  • What is the right way to compare, synonym, trigger and the Type using DBMS_METADATA_DIFF?

    I use this "Select dbms_metadata_diff.compare_alter('TABLE','COMP1','COMP2') from double;" compare two tables and see the result as below, but when I use "Select dbms_metadata_diff.compare_alter ('VIEW ',' VIEW_NAME1, 'VIEW_NAME2',"USER1","User2") double" to compare my opinion I do not see the result as below? But the query runs without error...! I want to compare, synonym, trigger and the Type. Thank you!

    Result:

    ALTER TABLE "USER1". "" ADD TBL_A "("FIELD_A6"NUMBER (2.0) NOT NULL ACTIVATE)

    ALTER TABLE "USER1". "" TBL_A "DROP ("FIELD_A3")

    ALTER TABLE "USER1". "" CHANGE TBL_A ' ("FIELD_A2' VARCHAR2 (20))

    ALTER TABLE "USER1". "" CHANGE TBL_A "("FIELD_A4"NUMBER (5.2))

    ALTER TABLE "USER1". "" CHANGE TBL_A ' ('FIELD_A4' ACTIVATE NOT NULL)

    ALTER TABLE "USER1". "" CHANGE TBL_A ' ('FIELD_A5' NULL)

    USER1:

    create table TBL_A (FIELD_A1 number not null,

    FIELD_A2 varchar2 (50).

    Date of FIELD_A3,

    FIELD_A4 number (5.2) default 0,

    FIELD_A5 varchar2 (10) not null

    );

    CREATE VIEW view_TBL_A AS

    SELECT FIELD_A1, FIELD_A2

    OF TBL_A

    WHERE FIELD_A1 = 114

    USER 2:

    create table TBL_A (FIELD_A1 number not null,

    FIELD_A2 varchar2 (20).

    FIELD_A4 number (5.2) not null,

    FIELD_A5 varchar2 (10),

    FIELD_A6 number (2) not null

    );

    CREATE VIEW view_TBL_A AS

    SELECT FIELD_A1, FIELD_A2

    OF TBL_A

    WHERE FIELD_A1 = 111;

    When I use "select dbms_metadata_diff.compare_alter ('VIEW ',' VIEW_NAME1, 'VIEW_NAME2',"USER1","User2") of the double ' compare my opinion I do not see the result as below?

    Isn't that strange? Even abroad-, we see NO results at all. Maybe because you don't post it to watch us.

    For an example of how to use the DBMS_METADATA_DIFF package to compare objects, see database utilities

    http://docs.Oracle.com/CD/E11882_01/server.112/e22490/metadata_api.htm#BABIDHGE

  • months Max and the year of the table

    Hello

    I need to get the months max and the year of a table.
    DESC WHR_REPORT
    REPORTMONTH   NUMBER(2)
    REPORTYEAR    NUMBER(4)
    Sample data in table
    reportmonth    reportyear
    01              2009
    02              2009
    03              2009
    04              2009
    09              2009
    12              2009
    01              2010
    02              2010
    How can I get the date max which means 022010 table?

    Thank you
    Sandy
    select max(to_date(to_char(reportyear) || lpad(to_char(reportmonth), 2, '0'), 'yyyymm' ) )
    from whr_report
    
    or
    
    select reportyear, reportmonth
    from
    (
    select reportyear, reportmonth, row_number() over (order by reportyear desc, reportmonth desc) rn
    from whr_report
    )
    where rn = 1
    

    I forgot to lpad around month

    Published by: bluefrog on June 10, 2010 15:59

Maybe you are looking for