Pavilion dv7-6b78us: software of fingerprint for Pavilion dv7-6b78us with OS Win 10 to the finger

Similar Questions

• HP P6540f - BIOS doesn't support AHCI for newly installed SSD with OS Win 7

  I cloned the drive hard 1 TB of origin provided with OS win 7 x 64 in a blusher SSD Samsung 500 b Bank and replaced the HDD with SSD.  The BIOS does not accept the AHCI mode for this drive and it only accepts the RAID.  Only SATA1 is acrive on this SSD hard drive and therefore does not improve the performance.  Can anyone help?

  I am a novice...

  @Big_Dave

  Thanks Dave. Sometimes you just can't find a BIOS Simulator right when you need it.

  @ahmedsr

  As seen in the image of the BIOS Big_Dave kindly provided, switch from IDE to AHCI and save changes by pressing F10.

  

• HP Pavilion f - 114 dx downgrade win 8-7, the search for drivers

  Hello

  I've passed my f - 114 dx, the Intel Core i7-4510u pavilion, the cpu @ 2.00 GHz 2.60 GHz. 6.00gbRam, OS 64 - bit win8 to win7Pro.  Trying to find the drivers section to access the internet, but couldn't find the page?

  In addition, when looking for drivers, there a number of sites offer to tell you what you need, if you download their app. I'm not comfortable with this, as they say often undesirable in your computer. Does anyone know of a reliable site for this?

  Txt in advance,

  MJKOP

  Hello:

  You should be able to use the W7 x 64 drivers and this model on your software.

  Do not use the BIOS or firmware files well.  Those who are strictly specific to the model.

  http://support.HP.com/us-en/product/HP-Pavilion-17-F000-notebook-PC-series/6936220/model/7174486/drivers

  The list of the parts for your model indicates that you need this driver for the wireless card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140311-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7174486&sw_lang=&product=7174485

• OK so I connected my iPhone 5 s for my Macbook Pro with a USB cable, but the system settings it is NOT CONNECTED, even if it triggers iTunes to open. Do not get internet connection on the MAC how come the system settings shows USB not connected

  I connected my iPhone to my Mac using a USB cable, but the Mac connected USB not appear, even if iTunes opens

  The Mac has no network to the internet via a port USB, WHY NOT?

  Where in the Panel are you looking for? And what you're trying to do with the phone? Transfer files? Share an internet connection?

• Siri don't look for something to do with movies when asked, returns the message "could not find anything for that"

  Siri shows no results for issues related to the films, if requested by the actor, like, years or even simply saying see the me movies the same message comes back "mmm I'm not find anything for that ' any ideas on what could be wrong?

  Welcome to the Apple community.

  Are you sure that you are connected to the iTunes store and if so than that.

• How can HI I create a printing guide for my business card with a size that includes the purge (3.75x2.25)

  

  It should look like this, the paper size is 12 in. x 18 in. thanks

  Create a 3.5 "x 2" "document to. 125" bleeds, the design of the map, place the file in the IDENTITY card in a 12 'x 18' document, step and repeat. " In this case, you can make corrections to a master doc and update the doc step and repeat. When you place the card check Display Options, so you can set with the bleeding.

  

  

• How do I download the driver of fingerprints for laptop models: HP Pavilion

  How do I download the driver of fingerprints for laptop models: HP Pavilion

  You should visit HP support:

  http://support.HP.com/

  Search for your PC model and download the finger print driver.

• HP Pavilion dv7-3170ez: volume indicator not showing when the volume control

  Hello

  I own a Pavilion dv7-3170ez and when I change the volume using the slider button in the volume on top of the keyboard, the volume is adjusted accordingly, but no volume indicator appears on the display.

  Previously, when you adjust the volume, a speaker icon with a cursor jumped in the middle of the screen showing the current volume level.

  I use Windows 7 Home Premium and Windows Update and HP update shows that I have the latest version of the software. Also, I have the latest version of the BIOS installed.

  Note: the touch buttons on top (volume, speaker and enable wireless, etc) stopped working a few days after the disappearance of the sound meter, I have fixed that by connecting battery power and disconnectiong for awhile. However, the indicator is still not displayed. Don't know if this is related (I guess not).

  Thank you

  The Volume OSD is a HP MediaSmart Menu function. He has to load at startup. To do this, go to msconfig and make sure that it is enabled under the Startup tab...

  If she is not there, you can download it here... ftp://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48552.exe

• All-in-one Pavilion 23 23-b034: 2 try to install the solution Center HP for printer HP Pavilion has failed. Screenshots

  I had to do a cover of the factory recently. I can print with the HP C7280 programs smoothly. I got this printer and the solution Center works on this pc before the resumption of the plant and another pc before that.  I tried to install my printer HP all One Printer Solution Center now twice with today fails. I hope that the help of screenshots.

  I 1) downloaded a complete new installation - 2) off all antivirus - 3) restarted and restarted the printer HP - 4) the fact that all windows updates have been applied for windows 8.1 - 5) tried after the provided HP solutions but always with failure. Installation all the way to the final "device configuration"... and then expires. Thanks for any help.

  

  

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  RnrMusicMan: (btw, former musician of Navy for this purpose) I need to send thanks a lot for your answer. I have tried, almost to the point of questioning my sanity, too many times tried too many things and all have failed. Why not go and buy a new printer? Financial considerations. Here's what I've worked with... (finally a good result there, at least the best I know for the moment at the end)

  (1) start here, I have an older HP all C720 printer wireless. I do not think at the moment there is a download of the full version which will allow him to install it in a machine of 8.1. An 8 machine if necessary, but not a 8.1 I do not...? That's what I gathered. Where I made my mistake, so, I was this old horse to battle C7280 installed on my newer HP Pavilion and worked very well with 8.1, (read on before thinking 8.1 work with the C7280) when I say great worked, I mean the Solution Center has worked. Then after a while I improved the Pavilion to 8.1 and everything was fine. A couple of weeks, I had to do a cover of the plant on the HP Pavilion. Instead of installing the software of the printer with the center of solutions right then while he was still an OS 8, I upgraded to 8.1 Loaded my favorite of all the programs and tweaks and tricks. Then I said, I'll install the old workhorse C7280. It would not, not at all, regardless of how many tips I read here, and Googling. Then I tried to install the full version of XP on one of the XP machines. No go. Something I said is prevention. Who could know. I tried to purge the XP what I knew could be related to HP. Shut off all antivirus programs, download fees, etc. etc. ad naseum. I have read and read and tried and failed and failed. You get the drama.

  So, I decided that if I could get it on the Acer Aspire one Netbook I could use as a slave, small sorta Acer server. I barely use the netbook anyway. So I couldn't do. Frustration. So I decided JUST ONE MORE ATTEMPT. And here's what I did for Acer.

  I did a factory restore. No former antivirus autour. Nothing is added. Presitine and already had Service Pack 3 with the resumption of the plant.  What follows I have none to little idea of his touch, but that's what I did.

  (2) I have an old modem that I had used as a slave of my new modem D-Link. I got it, because many of my devices will not work on the new 'n'.  I think, old modem old printer, old BONES. I have set the printer to get the old o SSID of the slave and agreed which has no password. Fortunately, I know anyone personally that could use this wireless slave and they all have their own.

  (3) so once again, I downloaded the full version of XP on the netbook. Extracted, he ran, and so he went the full installation and works.

  That's a lot, but I'm a cheap guy who hates to throw even if old devices, good. I use this Chrome extension called Extension Office remotely in order to get on the netbook from any computer and print using the Solution Center.

  I don't know what I did but I know I've worked. So this is my solution. I'm sure some could find another work around, but probably way above my paygrade.

  Once again, thanks a lot for taking the time. I think I followed your solution several, much too long and did not work. Unless I was always doing something wrong.  My solution was radical but it works for me always try to use these appliances. I just take good care of them and they last. My most recent is the HP Pavilion and it's going on 2 years now.

  Differences or questions please ask. 'Jack :-{D '.

• Software for the sensor of fingerprint for Win7

  I did a clean install of Windows 7 Home premium on my HP pavilion DV6606TX, which was already under Vista. The VeriSoft Access Manager by Bioscrypt fingerprint software that I've used before is apparently not compatible with Win7. Now I have fingerprint AuthenTec Inc. AES2501A driver installed, who says he works very good, but irrelevant software to actually run the sensor. Help, please.

  Hello
  Check this thread.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Problems with HP laptop Pavilion dv7-5004tx with the sound and video is this laptop being recalled?

  Hello I desperately need help.

  I have a laptop HP Pavilion dv7-5004tx, which is about a month.

  It's a really highy specced machine, 8 GB mem 1 GB card video etc.

  The problem is that when it video or audio playe he stutter along. I sent to hp about this problem and they do not come back to me? It is currently running windows 7 64 bit home edition.

  The model number does not exist when I search the site of HP?

  I noticed on some laptop computer review sites that it was be recalled, but it was the only information I could get. No specefics.

  I would really appreciate help from anyone out there? It seems as if HP tries to hidden it? There is no information about this laptop on any one of these sites (that I could find) and model number doesent exist on their site either.

  I think I have found a solution to my stuttering audio and video playback. I disabled the HP 3d drivegaurd software and so far it seems fine. After a search in any of the HP forums support I discovered a number of people have had similar problems with various portable computers HP.

  The solution seems to be to disable the car care software? HP aware of this and they do nothing to solve the problems with the drivegaurd software?

• Problem on HP Pavilion dv7-6c90el with Windows 8 Pro x 64 on video card

  Good evening

  I just finished installing Windows 8 x 64 Win7 Pro, I could find all the drivers for my laptop, but I have problems with the video card settings.

  My laptop is a HP Pavilion dv7-6c90el with two graphics cards, one managed by the processor, because it seems to do, and the other is normally installed on the PC.

  The cards are read by Windows as:

  Unit 1: Intel HD Graphics 3000
  Unit 2: AMD Radeon HD 6700 m Series (Microsoft Corporation - WDDM v1.20)

  the problem lies in the fact that the device must be a supported per second, or disabled, as it will not be. AMD video card must be set to 1 and the intel 2. If I go to the "Device Manager" to disable the card intel Windows, it works as if he was absent any video card, also installed driver is not correct because the card is an AMD Radeon HD7690M XT, the problem is that even if I uninstall this driver then always comes back. I also tried to download AMD Catalyst in the latest version, but can't find the card. It's as if the windows are imposed only use the unit 1, which, however, I can not disable the BIOS, because there is no voice. I note that Windows 7 had no problem.

  I ask you to help me because I need the video card for my work performance.

  Fixed the link - please try again

• HP PAVILION: p6633w please give a suggestion to improve the graphics for the best games. thnx

  HP PAVILION: p6633w please give a suggestion to improve the graphics for the best games. thnx

  Windows 7 64 bit all automatic updates of HP and Windows.

  Don, welcome to the forum.

  The first thing you need to do is to upgrade the power supply (PSU).  The current PSU is only 250W.  It is not enough to run a new intermediate level video cards.  They require a minimum of 400W.  It would be a good idea to buy at least one with 500W.  This will give you more choice of cards.  I love the Corsair and OCZ PSU.  I always suggest measuring the current PSU and comparing measures to whichever you choose.

  You should stay at 9 "or less for the duration of the video card.  This ensures that it fits in the space provided.  You would need a larger case to go further.  I like XFX, EVGA, Sapphire and PNY in that order.  The two cards in the links can be inserted into the computer and they will be good for the games.  Be sure to read the 'Détails' and 'Clients' to learn more about each of them.  I'm looking for products that have more than 100 customers and are at least 4 eggs.  Normally, this will be a very good product.

  Let us know if you have any other questions.

  If your problem is solved, please click "accept as a Solution.

• Problem reinstalling Windows 7 on Pavilion dm1 netbook with software HP-published records

  Hello, I have a Pavilion dm1 that require a clean installation of the Windows 7 operating system due to a keylogger problem that could not be defeated.  After backing up my system, I used DBAN Boot and Nuke to zero to HD.  I tried to reinstall the OS with the published HP recovery disks.  Everything seems to load fine until I got to the screen showing "Windows Setup".  There is a small pop-up screen indicating "Windows is now set the following...". "The 'installing the software preparation" has a check mark next to it, and the order of the day on the "Software Installation" list is highlighted. I then get an another pop up screen indicating "You must restart your computer to apply these changes", but the touchpad does not work where I can still get the pointer to appear to make a choice.  The system hangs just upward at this stage.  Any recommendations would be appreciated.  Thank you.

  How do you lond it hang before you finished it?

  HP recovery restarts on its own (several times) you shouldn't have to do anything and it is recommended that you do not use the keyboard or a touch pad during the recovery process, it can be a process hours several retrieving records. Be sure the wireless is turned on when you start the recovery process.

• HP Pavilion a6109n Vista 32 - bit, windows cannot load the driver for ATAPI DVD A DH16A1L CD-ROM

  HP Pavilion a6109n Vista 32 bit
  Windows cannot load the driver for ATAPI DVD A DH16A1LCdRom

  Hello

  Try the Microsoft fix it Center.   You receive this error code?