Pavilion DV7 start error message - unable to start BTVSTACK. EXE, BTBIP. Missing DLL

Similar Questions

• On a 1100sa Pavilion DM4 how prevents one error message: unable to start Bluetooth stack service?

  I have a HP Pavilion DM4 1100sa, p/n: XE139EAR #ABU, a serial no: CNU1220Z75. I bought it about 2 weeks ago. Shortly after he stopped hibernating when I closed the lid and the fingerprint reader was also very intermittent, also error message unable to start Bluetooth stack service popped up after the computer has been rebooted and after startup of Internet Explorer... My own attempts to remedy that does not so I called your 0844 3690369 number and possibly your man said that the only option was to do a complete restore of the system. For this I made and then reinstalled my commercial software such as M/S Office 2010, Adobe Photoshop elements 9 etc.

  The error (see above) again reappeared and the fingerprint reader was still intermittent, also my Bluetooth mouse is not connected. Yet once, my own attempts to cure these problems have failed, including playback of your pages in the forum, so I phoned again, everything seems to be resolved but the initial problems and the subsequent, reappears.

  So I made an another System Recovery on Thursday, July 26, 2012. I did a full defragmentation and wiped the free space on the hard drive. This time, the only problem that occurs is the error message failed to start Bluetooth stack service. Yet once it appears only after a computer reboot and start Internet Explorer.

  I am very reluctant to spend another hour, or so, on the phone so I want your best and hopefully correct advice on how to avoid this very annoying message from popping up.

  Mike

  We will uninstall the system Broadcom bluetooth driver and that's it.

  We will not install another driver for this device instead.

• After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  Pls I need help to resolve this error message.

  Concerning

  Unfortunately, this model laptop has a Broadcom bluetooth device or a device of Atheros.

  Try to install the Atheros driver first because it is more common.  If it isn't an Atheros card, Setup HP rejects the update indicating no match of material.

  If this isn't Atheros, install the Broadcom bluetooth driver.

  Here is the page of the driver for your laptop and Windows 7 64-bit.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218666#n311

  Bluetooth drivers are in the category network drivers.

  Let me know what happens.

• Error message "unable to connect to a Windows service.

  Whenever I boot my Toshiba ultrabook and go to Internet Explorer (not the tile splash screen), I get an error message: "unable to connect to a Windows service. Windows could not connect to the Service Agent all Windows users. This problem prevents standard users connect. As an administrator, you can view the system event log to see why the system has failed. "One of the consequences, it seems that when I go to my Windows Live email account via the Mail tile, it is no longer updates the Inbox (to any new email here for the last week or two). Another application (XE) is now longer provides updated information on its tile.

  What should I do?

  Hi Chris,

  Thank you for the update.

  I suggest you follow these steps to start the Windows user all install service agent and check.

  a. press the Windows key + R and type services.msc.

  b. search for Windows user all install agent service and right-click on it.

  c. Select Properties and dependencies tab.

  d. check the competent services for the process and close the window.

  e. now search DCOM Server process Launcher and set the type to be automatic and start the service to start.

  f. now seek the End Point Mapper RPC and set the type to be automatic and start the service to start.

  g. now go again to Windows user all install agent service and set the type to automatic and start the service to start.

  h. now, reboot the computer and check the status of the service. If it is not started, start it and look for the question.

  Let us know the status of the issue.

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• Error message - unable to find the proxy server - how can I solve this problem

  When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.

  Set not to use any proxy.

  Firefox> Preferences > Advanced > network > setting > don't score no proxy

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• Satellite Pro P100 - error message-"unable to get session notifications.

  Everytime I turn it on I get the error message "unable to get session notifications.
  What is c?
  How difficult or turn it off?

  Thank you

  Hmm... It looks like a 3rd party software notification.
  You may have removed (uninstalled) a program, but the registry contains some bad entries that cause this strange notification.

  You know the free app "CCleaner"? It repairs and cleans them registry and system files. Maybe this program might help to get rid of this message...

  Good luck

• Outlook Express error message "unable to delete the message.

  I try to delete messages in Outlook Express 6 and I get the error message "Unable to delete Message" I tried to select all Messages, no response...

  I'm glad you had success.

• Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  I get this message trying to install a Canon printer

  Jim

  A few quick questions for you:

  • What printer model
  • Have you tried uninstalling and reinstalling the printer
  • You, the drivers are up-to-date

  You can try and run the difficulty he tool and see if that solves your problem

• Error message: "unable to access your Valet."

  Whenever I try to open Cisco Connect, it still shows the error message: "unable to access your Valet. You can access your Valet settings when you are connected to your Valet. "However, I'M connected to it. In the center network and sharing in Windows Vista, it shows that I am connected. I tried to disconnect/reconnect and even restarted the computer. Easy setup key will do no good because it is not updated. All this happened after I tried to change the router password. He did cut my internet connection and to say 'we encountered an error. If anyone has a solution to this, that would be nice. Also, I would like the address for the Web-based utility change the settings of the router if I can not ultimately only Cisco Connect works.

  Also, I apologize if this is in the wrong section of the forum.

  OK, I fixed it. I have reset the router to the factory settings. Once again, thank you John for trying to help me, I really appreciate it

• Error message "unable to connect to the proxy server.

  I use Google ChRome as my browser. Unable to connect to the Internet. Error message "unable to connect to the proxy server. I went to the settings and tried to change the proxy settings. When I uncheck the box "use a proxy server" it does not apply only change.when I click OK, it always comes back to the box is checked.

  Chrome uses the Windows / IE settings proxy as do most of the browsers.

• Songs disappearing; error message: "unable to listen to a number of files queued. To get information about the problem, click on the icon next to each file in the list pane. »

  I get this error message: "unable to listen to a number of files queued. To get information about the problem, click on the icon next to each file in the list pane. "The thing is that he played the songs darned two days ago, what has happened since then!

  Never mind. I totally forgot that I had renamed a folder that hosts my music. Duh.

• Error message: unable to save this article before you save the header entry

  Hi all

  I'm trying to insert data into the table of okc_k_processes using an API. When I run my application, I get this error message: unable to save this article before you save the header entry. I tried to open the API package body and locate the error but could not find it. How to solve this?

  Thanks in advance.

  3065204 wrote:

  No, there is no trigger on the table. But what he really tell by the error and to save the header entry?

  We do not know your code, and we do not have access either!  So, how are we supposed to know what a particular error message?  You can not save the ticket before you save the header entry is NOT an Oracle error, it's a validation error request that someone who wrote the API set.  We can only guess why you get it.

  Your API call should be to create a detail record and requires that you create a header record.

  The validation is

  • okc_contract_pub.create_contract_process and one of its dependencies
  • pa_interface_utils_pub.get_Messages
  • a trigger on a table.

  run the following

  Select *.

  from ALL_SOURCE

  where the TEXT like '% you can not save this entry before saving the header entry %.

  and you'll probably find where.

• Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

  Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

  You are not allowed to write to the specified folder.

  CHEK your access privileges.

  Also: in case you save to a network: do not.

  Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

  If you need additional assistance, please we say system and version of Illustrator and where you want to save.