Pavilion DV7 the touchpad buttons not responding

Similar Questions

• HP Pavilion dv7-4190us: touchpad buttons do not work

  Last week, I received two HP Pavilion dv7-4190us laptops from Amazon. Both had the same problem: the buttons on the touchpad do not work. If you hit one of them, the result is the same if you hit the main part of the pad. Affecting the buttons in a particular function does not work. I checked in the Information System, which showed the touchpad as having 0 buttons. I spent over 2 hours on the phone with HP support, but they were unable to resolve the problem. I sent two computers laptops back to Amazon, ask for a refund. It's a shame that these otherwise great computers are rendered by this problem, making them unacceptable for me.

  It turns out that the buttons on the touch pad work. The result of this 'problem' is my confusion over the operation of these buttons. On this touchpad (which is not like the others, I've used so far), the buttons are flush with the surface of the touch pad, and they do not respond to touch, but only in the same way as a button on the main part of the pad. The fact to the specific button functions, to firmly press a button. I found this by reading the answer to another user who has reported the same issue. I hope this can help to avoid confusion of someone else in the future.

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed

• ThinkPad T430s - the touchpad buttons not working not

  I have 64 bit Windows 10 installed on my device to score Synaptics Thinkpad T430s. driver version is 19.0.17.27.

  My problem is that the buttons below the touchpad will stop randomly work and after some time buttons started working again. Also, cursor freezes randomly. TrackPoint is functioning normally.

  Trackpad works like a charm.

  This laptop is under warranty, so I contacted Lenovo Sunday. Today, they came and changed the palmrest with touchpad. Now touchpad seems to work OK.

  Thanks for your help ColonelOneill!

• N5050 laptop: the touchpad buttons not working do not.

  Hey, my laptop N5050 that is now JUST out of warranty started developing problems with the touchpad, a few days ago, mainly by pressing the left button once would be double-click involuntarily. Now the two buttons have stopped working altogether.

  Advice would be excellent to remedy the situation. As a result of this problem, I was forced to buy an external mouse, but wish to have my touchpad in working condition. I have experience in building the pc, but never a laptop. If the resolution is should a technique I try a manual correction or another solution?

  Thank you.

  I just corrected it and recorded here to answer you.

  I had exactly the same problem. I finally got sick of it and open the laptop to see what was going on. Looks like there is a lack of design with the n5050 and some other models that can cause the ribbon cable for the buttons on the touchpad to wave in the open air. All you need to do is to remove the touchpad/palmrest unplug the flat cable on the bottom of things to click buttons (probably disconnected and salty as mine was), blow gently to get the dust out and plug it in again. Here's a video tutorial that will take you through how to proceed step by step. http://www.YouTube.com/watch?v=YLIAZFLVrqs It actually shows how to replace, but if you just do what I did, take it apart and clean/re-seat connectors, you should be fine.

  The connector I'm talking about is those small tiny ranging from the bottom of the click buttons to the bottom of the touchpad is. It can be seen in the video at the top of the video coming out the metal brackets under the click buttons at 2:37 and the connector is located on the lower part of the clickpad. Ity bitty is and all of the Ribbon cables are fragile so please be careful and do all this at your own risk.

  Let me know if you have any questions on what it is and I'll try to get back to you as soon as possible.

• When I click on the 'Get' button in the app store for El Capitan, the beachball cursor rises and crashes the app store (not responding) in the force quit window...

  When I click on the 'Get' button in the app store for El Capitan, the beachball cursor rises and crashes the app store (not responding) in the force quit window...

  How can I fix it?

  Nevermind, I restarted the computer and it was fixed

• Satellite Pro L20 - right button on the touchpad does not work

  I have a Sat Pro L20.
  When I press the right button on the touchpad, nothing happens. The left button works fine.
  I checked the properties of the mouse left button is set as the main click with the right button, defined as the secondary click.

  Thank you.

  Hello

  Maybe the touchpad button has a physical malfunction.
  But first of all, you can try to reinstall the driver for the touchpad. Check if the resettlement will change something. But the truth; I don t think this will solve the problem. Anyway, try is free, you know.

  But if that does not help so I think you need to replace the touchpad.

• Hello! I just bought an iphone 6 and I was starting the phone due to what he says, but right after the icloud copy was made the phone do not respond... He says decides to continue, but slice to reload button does not work... What can I do?

  Hello! I just bought an iphone 6 and I was starting the phone due to what he says, but right after the icloud copy was made the phone do not respond... He says decides to continue, but slice to reload button does not work... What can I do?

  See if the troubleshooting steps in this article to take help supported:

  If the slide on the upgrade screen does not disappear once you upgrade to iOS 9 - Apple Support

  See you soon,.

  GB

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• Recovery of the Internet and the Touchpad does not

  Hi all!

  I tried to format my Macbook Pro (2015 start, 13 "), so I wiped the disk with disk utility.

  Now, I'm the restart with CMD - R and a globe appears. I know that it means that the computer is trying to reboot from the internet, but I have to choose my Wi - Fi and insert the password.

  The problem is: the touchpad is not sensitive, so I can not perform the procedure. I also tried a keyboard and a USB mouse, but it does not work either.

  Thanks to anyone who responds!

  Start up your Mac in Mode without failure.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  
  

  Then start while pressing the command + R keys to access internet recovery to restore the OS X.

  Just to let you know, you don't need to wipe the drive using disk utility in your Applications / Utilities first folder. Only use OS X Recovery

  to reformat and restore the OS X.

  On Safe Mode

• I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  I have laptop (hp probook 4520 s), the touchpad does not work. How can I turn it back on it?

  This is a question which would probably respond by HP support, because it isn't really a Windows problem.

  Are you sure that the touchpad is not just turned off? Many laptops have switches, power switch, so you can rest your palm while typing one is not worry by pressing the key.

  Sometimes, there is a button above the key, a key on the Ko, or some have a stain on the pavement you waiting/tap/double tap/etc. to toggle the pad.

  If not, you could try to go on the site of HP and DOWNLOAD/reinstall assistance the SW for the touch pad.

• Is satellite U400 - possible to replace the touchpad button?

  Hello

  I need help please. I want to know if there is a possible way to change the button to my Satellie U400 because they become soft and they are not as good and strong as it was before, please someone know if I can delete these and put 2 new sound?
  If you don't understand exactly what I want to say take a look at the photo and you will see/understand.

  [http://oi56.tinypic.com/j0wwoj.jpg]

  Thank you.

  Lööw salvation,

  I'm sure that it of possible to replace the touchpad buttons because you can replace everything on a laptop. But I think that it s a little trickier because you must remove a lot of pieces and that's not easy.

  You should ask an authorized service provider guys can order the new spare part for you and exchange it. Just write an email, for example, to get in touch with them.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite C870-155 - the Touchpad does not work

  I have a Satellite C870 - 155 (PSC8AE) and problems with the touchpad.

  The buttons work, but not the pointer/trackpad.

  The laptop was in need of a replacement hard drive, and I don't have any recovery media. I'm running a new installation of Windows 7 (Home Premium, 64-bit) vanilla.

  I installed all the drivers, that I can find (including the touchpad).

  I tried pressing F5 / Fn + F5, but this does not change anyuthing that I can see.

  I am running the latest version of the BIOS I can find (6.60).

  Any suggestions?

  > Everything seems to work except the pointer.
  I guess that s hardware problem and the touchpad module must be replaced.
  I m straight probably because if the touchpad would be disabled or drivers that would be misunderstood, the touch area AND the touchpad buttons would not work.

  In your case touch ONLY area/pad does not work, but the buttons

  But just to be sure: go into the BIOS (F2)-> Advanced tab-> the system setup
  Here you can check whether the pointing device (touchpad) is enabled.