Pavilion dv7t 6100 - LM726AV: replacement of heat-sink/fan using the thermal pads and thermal paste/paste

Hello

The fan on my laptop died so I am trying to replace the fan and the heatsink unit. The manual that I use specifies that thermal grease should be used on the cpu and heat pads must be used on the graphics processor and the capacitors.

The arrival of the new fan it came with heat pads on all relevant areas of the sink as a tube of thermal grease. When I removed the old fan, thermal pads have proved only on the capacitors and the components around the GPU and that thermal grease was used on the CPU and the GPU.

My question is: how this part must be installed? Should I remove the fron pads thermal heat sink that covers the processor cpu and graphics and do not use the thermal grease in these areas? Or the thermal grease can be used here and let the thermal pads on the heat sink?

Thanks for your help - thank you for the advice/opinions in this case.

You can remove the protections and pass with the dough so but only f, you are sure that the metal on the core processor and graphic is in solid contact. And there, I meant it touches and also has a lower compression. For me, the thermal paste is superior coolant and should be used on really hot spots. However, if the metal is not full, solid contact you run the risk of overheating.

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • Pavilion dv7t-6100-cto-quad: I can't get the new drivers on the hp support site

    I have restored my ssd from disks that I made the computer when I bought it and I did everything I know to do and can not get the hp support site to give me a list of drivers for that computer. I know there must be some updated drivers for the computer 3 years, but I don't know how to get them and it is interfiering with other programs or drivers that need updated drivers that I can't. Please help me with this. I learned that the site is in place and current, but it does not work as far as I can tell, for my portable quad, dv7t-6100 cto. Everything continues to run and never becomes pilots. Thanks for any help in getting this resolved.

    REO51ST

    is older than me - the site is always down.

    fishcrazy13

    Here is a workaround:

    Drivers HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC Windows 7 (64-bit)

    It's somewhat austere course - this isn't the site of HP, so you won't see the full Support pages of manuals, operating instructions and troubleshooting.

    I checked the other models - those I previously checked watch this site matches the drivers supplied by HP for the model and the version of the OS.

    Click on the Thumbs - Up Kudos to show that you appreciate the help.

    Click on accept as Solution when the answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • Bluetooth problem: HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC

    Hello forums HP!

    I have problems with the bluetooth in my HP dv7t-6100.

    I am no longer able to see/add devices bluetooth with Windows 7 is to add a device. He was working a few weeks ago, but was (waking up from his sleep would cause the device to turn off and I should enable in Device Manager to operate).

    I tried unistalling, then reinstall the drivers Wifi and different bluetooth drivers, but I can't see my bluetooth devices (which I know work btw).

    Try to add the com ports manually does not work, and I can't remove them later, because I get the message error "the specified service does not exist.

    And by clicking on "Choose a COM port for a Bluetooth device" brings up the help page for Spider Solitaire, which makes no sense.

    Any suggestions?

    Thank you!

    WELL, I GOT MY BLUETOOTH WORKS AGAINN!  (Sorry for the caps)

    After turning around uninstalling and installing drivers for many hours, deletion of registry keys, reseating the bluetooth module, I finally found something that worked.

    I have installed the Toshiba bluetooth stack software and unfortunately, my bluetooth has started working again! Wohoo!

    It was difficult to settle at first it seemed that the installation froze on the driver real bluetooth, but just cancel and start the program caused to function normally. (I think its because my stack of drivers/bt bt were corrupt and I couldn't make them disappear completely).

    So, if your bluetooth stops working to the point where mine was to, try another bluetooth stack. It should not be Toshiba, but it happens to work with my HP laptop.

    SEE YOU SOON!

  • HP Pavilion dv7t-6100: switch to ATI RADEON video card. Hang, reboot, and white screen.

    Hello.

    I was using my laptop as usual, and like many other times I have tried to swich for High Performance video card.  At this time, Windows crashes; So I had to press the power button a few seconds until the computer turns off.

    Then, when I turned it on:

    -Anything on the screen (on the screen of the computer laptop and external monitor)

    -Cannot access BIOS

    -No boot sequence (operating system does not)

    -Led is ON (without LEDs + turn signals)

    -Keyboard unresponsive (caps lock led for instance does not change when I press on it)

    I tried several suggestions "base" that I found on the Internet with no luck:

    -Unplug the power cable, remove the battery

    -Remove the battery from the BIOS, RAM, HARD drive

    -Press the on switch / off 60 seconds

    So I guess something is dead here.  Could it be that the RADEON card no longer works?

    When the computer is turned on, what card uses by default?

    Is it possible (not through BIOS, not through OS) to specify to use the integrated graphics card Intel? Removing the RADEON card (is that even possible)?

    Thanks in advance.

    Hi @fedecris,

    Thank you for the update. Q0F7E4-5R7894-MFH14K-403 P 03 error code indicates a failure of the memory module. Please see the guide to maintenance and maintenance for recommended replacements. (the link is in my post above) Note Chapter 3, page 31, paragraph 23.

  • Speed reduced... heat sink fan!

    I have HP pavillion 1211-ax/entertainment notebook, my heatsink fan speed is reduced...!    Yes.

    How I came to know...

    I downloaded GPUZ in that tab censor its fan speed showing (%) - 30%

    not only this my speed of fans remains even when the temperature of my cpu goes to 95' C... now my average cpu temperature is 90 ' C.

    Even if give some load on the gpu fan speed remains same... and after 95 my lappy stops.

    On Lappy statup @ begning HP works test (or something)... in which the fan speed increased to 100% and then back to normal... that dosent like also seems to be coming...

    earlier, my when playing games when the fans speed increased to 100% lappy used to vibrate and ring (fan)... and the average temperature was about 70' C.

    I was saving my lappy on during the night for download movies... then he used to get so hot the morning...

    I THINK THAT ITS BESAUSE OF THIS...!

    so, please help me wat should I do or wat could be the problem... As soon as possible...

    Check out this guide

    http://support.HP.com/us-en/document/c01657439

    If the Council of cleaning in the link above does not, replace the fan.

  • HP Pavilion p6290d: change to smaller capacity desktop hard drive using the recovery disks

    Currently my hard drive (750 GB) is having a problem. I have a spare hard drive (500 GB), I can replace the 750Go with the 500 GB hard drive using the recovery disks that I created when I got the pc?

    Hello:

    All I can say is that you have nothing to lose to give a try.

    500 GB could be sufficient to allow the recovery discs, you did to work.

  • to replace '-' with ' / ' in a string using the FrameMaker API

    How to replace "\folder1\folder2\folder3" by "Folder1/Folder2/folder3" using the framemaker API?

    Hi Asha,

    It should work as well. Note the following, however:

    -your version will be case-sensitive, always which is OK for what you wanted

    -Maybe you left a code, but what you have shown is missing some important steps of allocation/deallocation for use with F_StrCat(). You need to allocate more space before the concatenation of strings and to release all pointers unused when or before you use them again. It might work for now, but I can assure you that inadequate allocation routines are a sure path to memory leaks and crashes in the future.

    Russ

  • HP Pavilion DV7t-6100 impossible to locate bat software

    Hello

    After hours of research, I have been unable to locate the proper document to re - install my software of beats. I had to reformat my computer and use a copy of windows OEM 7 due to the recovery media not recgonizing my laptop as a HP laptop.

    I'm ok with the inconvenience less this block one road. I tried to install the audio driver IDT ( http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101114-1&cc=us&dlc=en&lc=en... ), but unfortunately the beats software does not install.

    Any help would be appreciated.

    Thank you

    Hello:

    Please see if one of these threads resolved to help.

    http://h30434.www3.hp.com/t5/forums/searchpage/tab/message?filter=labels%2Clocation&location=forum-board%3ASound&q=Beats+software#/?solved=true&location=forum-board%3ASound&q=Beats+software&search_type=thread&filter=labels%2Clocation%2CsolvedThreads

  • HP Pavilion dv7t-6100 CTO keys does not

    The 5 key of the numpad and normal keyboard do not work and also my key (decrease volume) f9 button also not working. I system restored back all the way back to the beginning of the month because I found it odd that the two 5 did not work, as if a virus plaguing the key board.

    Hello

    An idea for you would be to test the keyboard in an environment different ro see whether it is material or not.

    We can check the keys start on the recovery partition and opening a command prompt.

    Turn off the laptop

    Press the power button and then press F11 until the screen says recovery at the bottom left or said Windows loads the files. If it shows a different menu on your screen, you can have support too late or continues to load Windows, you may have a problem with the partition.

    Then when it loads in menu option so that the program is slected. I selects "System Recovery" and then in the following menu, press FN + SHIFT + D

    The keys w / test questions the prompt window commpand that opens.

  • HP Pavilion dv7t-4100: Factory reset when Win7 was removed from the main partition

    I'm preparing this old laptop for sale. I started on a USB key and erased the C: partition where Windows 7 was installed. I then he reformatted to NTFS and set it as the partition active.

    When I rebooted and you press F11 to get to the system recovery, I get a message, there is no operating system on drive C.

    How can I do a factory reset at this point? The recovery partition is still there, I checked, so it's good. I have the ISOs for CD recovery, but I need to burn to disc to use. Is there a way to perform a factory reset of the recovery partition, without going through the hassle of doing this? I heard that there could be an option to boot from a USB?

    Thanks in advance

    Did not work. I guess I need to go buy the CD :/

  • Pavilion Notebook 17-G012NA: Audio uses the laptop speakers and not a paired devices

    I have two devices paired bluetooth connected to my computer laptop, but audio still plays through the built-in speakers of Realtek.

    The device is introduced, my laptop confirms its she paired up and I do not see in the circles where I'm wrong.

    There is no problem with the associated devices because they work brilliantly with my phone and turntable.

    Everyone knows this?

    Thank you

    Hello @RG99,

    Welcome to the HP Support Forum's community!

    I understand your message that your Pavilion laptop - 17-g012na will only play audio through the built-in speakers and not the Bluetooth devices are paired.

    These speakers have worked in the past with this laptop? Have you verified that your system is up-to-date available throughout drivers and software?

    Microsoft has a background paper on connecting devices Bluetooth here and also a document of difficulty connections Bluetooth.

    I know from personal experience that some Bluetooth speakers and other devices, even when it is associated with, should click you on them to connect before it will actually start communicating with the PC.

    Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

    Thank you!

  • How can I buy an iPhone AT & T using the upgrade program and replace it with T-mobile?

    I intend to buy the iPhone, which will be released this morning, and I heard that the next iPhone will run out quickly, the configuration I wanted, as 6s and 6 s iPhone more runs so quickly, but this time, I want to start from the beginning because I don't want to miss a day of work, or otherwise I won't get it that $5000 per day , so if I don't have a number to AT & T, what do I do because I am on T-mobile, and I can't go to the Apple Store Friday on time to conduct a review of YouTube and get views and re-read soon on my site. I am currently on AT & T, but I heard that the iPhone is going to be better with the upgrade program, and I wanted to sign up. So, why do you need an AT & T number, and why should I go to the Apple Store if I want a T-mobile and last year, I had to wait until October 9 to get my 2nd iPhone 6 s more of Apple and a back of pre-orders unlocked without AppleCare.

    Nothing is still announced by Apple, but wait like everyone else.

  • Pavilion p6506f: System Recovery option grayed out when you use the recovery to factory default reset disk

    Dear experts,

    Please help me on what I am making a solution for about 4 hours now...

    Somehow my recovery partition is damaged, so I use the recovery disk that I created when I bought the computer.

    I used the disc to start the computer and after loading files and everything on the menu of Recovery Manager "System Recovery" is grayed out.  Note that I have not changed any hardware on the computer.

    Help, please!

    Thank you!

    Hello

    You did do the right thing. But you created a Win 7 recovery disk, not the game of HP recovery disks.

    You can switch to Win own 10.

    You will need the product key Microsoft of the COA sticker attached to the frame of your PC of 25 characters.

    Images of example COSTS:

    Do a clean install of win 10 If you do not know the product key of Windows 7 on the certificate of authenticity.

    Win 7 PC sometimes have problems updating to Win 10.

    I really think you should get support from HP Win 7 recovery. If the Win 10 upgrade fails you can always return Win 7 If you have a Win 7 HP recovery media.

    Your choice.

    Jay

  • Replace the thermal paste on Y570

    Hey guys, you can change the thermal paste from the portable Y570 without dissociate completely the it (coming out of a keyboard and other things) or is there another way? If someone can tell me how? Thank you

    Hi Imattf,

    to renew the thermal paste on the model IdeaPad Y570, you must disassemble to some extent,

    Please see the training of Service Y570 video...

    http://Lenovo.f.relayware.com/content/CourseWarePublic/8921/player.html

    Zehn

  • HP Pavilion 500-274ea: Hello, I need help please I installed the graphics card and nothing comes only a black screen

    Please help me I bought a new power supply 780w I had 2 graphics card work in my old pc, but on the new pc they do not fan spins everything well but no screen when I plug my graphics card? What should do?

    http://support.HP.com/us-en/document/c04177680

    It comes to my pc

    I fix thanks for reading. I just had to play in the bios for a bit lol like 2 hours but I did the job

Maybe you are looking for

  • My Ipone 6 bricks

    I have iphone 2, 6 & 6s, my 6 bricks after update 9.3.2 as ipad 9.7 pro has 56 error, please help. He is unable to update and restore. Help Help

  • Satellite T2130CS - Question on upgrade components

    I'm a newbie to this site so Hello to everyone. I hope that with all of the knowledge in this group, I can help.I have a Satellite T2130CS, which is in good shape and I want to upgrade to the following: Increase the RAM to 32meg - doneReplace the bat

  • my button "make available offline" happened when using apple's music?

    my button "make available offline" happened when using apple's music?

  • Image Matching with Labview or model

    Hi all! I am currently implementing a picture matching algorithm on two .png images (let's call them model and Photo). The idea is that the template contains an examply of which must be shown in a certain part of the picture. Model and photography ha

  • How do you get Silverlight to work effectively on my iMac?

    Every few months or years I try and play Netflix on my iMac. I'm always headed to upgrade Silverlight page. I always upgrade and then when I try to play the movie I get routed to the Silverlight upgrade page. I'm always headed to upgrade Silverlight