Pavilion dv7t-7000: Notebook keeps beep at startup

Similar Questions

• HP Pavilion dv7t-7000 CTO Entertainment Notebook PC - Upgrade processor

  Hello

  Any help would be appreciated.

  I have a HP Pavilion dv7t-7000 CTO Entertainment Notebook PC.  Due to a new job, I need to update my processor of the current 2.30 GHz (see exact specifications below, please) of at least 3.0 GHz.

  Is there a processor 3.0 GHz there that is compatible with this particular computer? I called tech support and they told me they don't know. I don't know who else to ask.

  This computer was purchased just a few months ago (before I got the new job). I really don't buy a new computer, if possible, if I can upgrade the processor in it.

  Here are the current processor specifications:

  Intel Core i7 3610QM
  Codename Ivy Bridge
  RPGA Socket 988 B package
  The 22nm technology
  Specification Intel Core i7-3610QM CPU @ 2.30 GHz

  Thanks in advance.

  Well, it seems that one (that I found) 3.0 GHz processor that Intel made for my chipset (HM77 Express Chipset) and it's the Extreme edition i7-3940XM (http://ark.intel.com/products/71096/)

  Priced at $1,000 +, it looks like I'll be shopping for a new computer.

  Don't know if anyone from HP read the peer forums, however, I won't buy another HP product.

  This machine had problems outside of me needing to upgrade the processor for my own personal reasons. Your support is grossly lack in all areas even pull your techscannot model with the serial number.

  Visitors should not go out on the Internet for questions of research like this.

• HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  David_kata wrote:

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  Hello

  Both modules can be used. DDR3L means that memory using low voltage. Means that the modules produce less heat and last longer than DDR3 pure ones. I always use 1600 MHz CL9 DDR3 Corsair pure modules.

• Pavilion dv6t-7000: the black screen at startup error

  My computer was slow for a few days now and yesterday it froze completely upward if I pressed the power button until it turned off and I tried to start it again to the top. It did the windows on screen for about 15 seconds then the screen went black and all I had, it was a cursor on a black screen. Fan always on, keypad lights, turntable CD upward. I tried a hard reset with battery, I don't have an external monitor to try, I tried reinstalling the RAM, I tried updating the BIOS, I ran the memory and the hard drive test, and nothing has worked so far. Another thing that you have would be appreciated.

  I have a care package which is always good, but I'm in Chile until August. It would still be possible to make a claim and took in charge?

  Hello

  If the system restore failed, so the last option would be the system recovery. Reinstall the OS (operating system)?

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-7000-entertainment-notebook-PC-series/5226230/model/5273697/document/c01867418/

  If the system recovery defective then computer must send to the HP service center.

• Pavilion dv7t-7000: what fan to get? don't know how to find if I have discrete or UMA (dv7t-7000) graphics subsystems

  replaced fan needs, do not know if I have discrete graphics card or UMA, options include from the maintenance manual:

  Intended only for computers models graphics subsystems with memory UMA 603690-001

  Only for the only with computer models equipped graphics ATI Mobility Radeon HD 5470 subsystems with discrete memory 604787-001

  Intended only for computers models graphics ATI Mobility Radeon HD 5650 subsystems with discrete memory 603691-001

  I'm not sure which one of these three options I and don't know how to find out. Device Manager displays Intel HD Graphics 4000 and NVIDIA GeForce GT 630 M

  Hello
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c03221579
  
  Go through the Page 26, 76-81 you need part number HP 682061-001 for Fan/heat sink Assembly in models with Intel processor with video memory discrete.
  
  Online shops selling:
  HP part store-
  http://PartSurfer.HP.com/?search=682061-001#
  
  http://www.Amazon.co.UK/sparepart-HP-thermal-module-682061-001/DP/B008L33ET2
  
  http://www.Amazon.com/Hewlett-Packard-682061-001-CPU-cooler/DP/B00MF23SZK
  
  Used:
  http://www.eBay.com/ITM/HP-Pavilion-DV6-7000-dv7-7000-CPU-cooling-fan-with-heatsink-682061-001-/181107377385
  
  Fan only:
  http://www.Newegg.ca/product/product.aspx?item=9SIA64T2710612
  
  Maybe you'll get from online vendors, sales of fan only. Contact the seller to confirm the specifications of the part, part number, authenticity guaranteed as appropriate.
  
  Concerning
  
  Visruth

• Necessary for Pavilion DV7t-7000 BIOS update support MRC 1.5.0.0 (external monitor flicker problem)

  I just bought an edition four HP PAVILION DV7-7000 with the graphics of 650 m hd4000/nvidia intel

  combination. I'm running Windows 7 x 64 with 16 GB of RAM of the system.

  I had some serious screen from flicker of my external monitor from the day I bought the laptop. I did some testing and found that the problem occurred while the screen resolution to 1920 x 1200 x 32. Any lower resolution or bit depth could reduce or eliminate the problem of flicker.

  I did some research on the web and found this:

  ------------------

  107 re: 4000 Intel HD Graphics (i7 - 3770 K) sometimes flicker

  Robert_U 25 Sep 2012 09:34 (in response to Frojo)
  Hi all

  This problem is a BIOS problem more precisely with the memory reference Code (MRC) version 1.4.0.0 or more. Contact the manufacturer of your system or the card mother for an update system for your system BIOS or the motherboard that includes the MRC 1.5.0.0 or newer.
  If you have a system with 2 or more memory modules and are comfortable with the removal of all but one of them so that your memory is in single channel mode, try and remove all but one of them and the problem will disappear. This can be used as a workaround until you are able to update your BIOS from the manufacturer of your system or motherboard that includes the MRC 1.5.0.0 or newer.
  -------------------------

  Is this thread by forum on the website of intel:
  http://communities.Intel.com/thread/30096?start=105&TSTART=0

  I think that's the question that I am experiencing. I checked it by deleting memory modules and solve the problem itself.

  Does anyone know where we can expect an update of the bios? I really want to reinstall my second memory stick and retrieve my additional 8 GB.

  You have the original sticks that came with your laptop?

• I have a Pavilion dv7t entertainment notebook. Bluetooth does not work on startup.

  Most of the time when I put on the Bluetooth does not start. I know when he failed, because my mouse does not work. When this happens I open "devices and printers" in the control panel and the device Bluetooth showing will be the laptop itself. Now, I know I have to do a restart because the Bluetooth icon appear not in the tab "icons". If I restart normally, I can then use my Bluetooth mouse and all my Bluetooth devices will be show in devices and printers. I tried updating the driver and even roll back the driver. The last 3 days this problem has been more frequent. This morning I had to reboot 4 times to get the Bluetooth to work.

  Hello @wandrews1944 ,

  Welcome to the HP Forums!

  I see that the Bluetooth service does not automatically start your laptop.

  It would be really useful to know which product and the operating system you are using.

  For more information on the search for your model and product numbers, click here: How can I find my model number or product number?
  What version of Windows you are using, click here: Windows operating system am I running?

  You can also try to control services on the laptop to make sure that the Bluetooth Support Service (or bthserv) is configured to start automatically, instead of manual. Start (Trigger) manual will try to detect Bluetooth devices before turning on, to prevent the service from running when it is not needed. This does not always work perfectly so if you use Bluetooth we will set it to automatic instead.

  To change Windows services:

  1. Press the Windows key + R to open the run window.
  2. Type services.msc and click OK to open the Services window.
  3. In the list of services find Bluetooth Support Service (or bthserv).
  4. Right-click on it and choose Properties.
  5. On the general tab set the drop-down list Startup type to Automatic.
  6. Click the log .
  7. Check the circle Local System account .
  8. Click OK to close the window
  9. Reboot and test.

  If it still does not respond, you may need to try automatic (delayed start) to give the system more startup time before searching for Bluetooth devices.

  Let me know if that helps!

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• Pavilion dv7t-3000 mobile: stuck on the startup screen, must repeatedly perform a hard reset to fix

  When starting after a successful boot & use, the PC is stuck on the startup screen that is black with the logo blue & white HP in the middle and "press ESC for the start menu" at the bottom left. I have to perform a hard reset to get a normal startup. Everything works fine. I stop the PC from the start menu. At the next startup the PC hangs at the HP splash screen. A hard reset solves the problem, but the problem occurred on & repeatedly.

  Problem was solved by uninstalling a number of HP programs! Unfortunately I have lost the paper on which I wrote exactly what programs I uninstalled. If you find this issue that may arise on your notrbook, try to uninstall the HP programs

• A5F92AV Pavilion DV7T-7000: Portable HP Pavilion is not completely turn off car Windows 10 improvement

  Hi there HP community.

  I had an availability upgrade to Windows 10 quite awhile, but I waited to upgrade until my computer has confirmed that my PC is ready for the upgrade.

  Since the upgrade to Windows 10 my laptop HP Pavillion is not entirely closed. The screen turns off but the power biutton is always lit.

  I used my HP Support Assistant looking for new drivers, but it seems that I am up to date.

  I did the same with Windows Update as well.

  Has anyone else encountered this problem?

  Someone at - it solutions?

  I hope someone can help.

  Thank you

  mitchmatch1

  Thank you
  mitchmatch1

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• A5F92AV Pavilion DV7T-7000: touchpad of HP Pavilion laptop freezes

  Hi there HP community.

  I had an availability upgrade to Windows 10 quite awhile, but I waited to upgrade until my computer has confirmed that my PC is ready for the upgrade.

  Since the upgrade to Windows 10 touchpad of my laptop HP Pavillion freezes when performing certain functions.

  I used my HP Support Assistant looking for new drivers, but it seems that I am up to date.

  I did the same with Windows Update as well.

  Has anyone else encountered this problem?

  Someone at - it solutions?

  I hope someone can help.

  Thank you

  mitchmatch1

  Thank you
  mitchmatch1

  It seems that when Windows has been improved to 10 he changed my touchpad settings (without asking). Changed Windows 'Delay MEANS' setting. I went to the settings and changed so that there is 'NO DELAY (ALWAYS ON)' and that seems to have solved the problem.

  

• Updated network card in the Pavilion dv7t-7000

  Hello.

  I'm looking to upgrade my laptop WiFi card for best performance and to use the 5 GHz network in my apartment.  I read a bit online and it seems that some HP laptop BIOS have a white list of cards I can use only. Is it possible for me to check if my system has this?

  Currently, I have an Intel Centrino Wireless-N 2230 card I want to replace with an Intel Dual Band Wireless-AC 7260.

  Any help would be much appreciated!

  Unfortunately, your laptop has always the white list. There is no 802.11ac adapter, you can use. You must use one of the cards listed in the manual wireless and there have been a number of HP parts:

  Manual

  See Page 55. It's the card best ranked Wireless:

  Module Intel Centrino Advanced-N 6230 WLAN 670691-001

  The problem is this part number takes the form of Ralink card in HP Partsurfer.

  This can work:

  http://www.eBay.com/ITM/HP-OEM-Intel-62230ANGMW-6230-abgn-advanced-N-Bluetooth-3-0-Wireless-N-WiFi-Dua-/261440474109?PT=US_Internal_Network_Cards & Hash = item3cdf110bfd

• Pavilion dv7t-7000: A5F92AV: connector Zif: reference number?

  Hello

  My problem is that I opened my computer broke a zif connector.  The power button connector to be exact.

  I was wondering if there was a part number or a place I could find the right connector and just replace.

  Without that part, the computer is basically a paperweight.

  Thank you

  Pat

  What do you mean that seized? You have lost the piece of plastic "closer"? Or what? The zif connector is not a separate part with a part number. There is a site that specializes in zif connectors. http://www.Mouser.com/search/refine.aspx?keyword=ZIF+connector

• Pavilion a6228.sc; The PC beeps at startup, no display on screen. Short - long - short, etc.

  The first tone is about 2 seconds, the next closed to 6 seconds, and if it continues. Recently replaced default graphics card. Does anyone have an idea what could be the problem? It is not the graphics card and all the fans are running. Help is appreciated.

  I suggest that you remove and then reinstall your RAM modules. No display with a desktop PC is often a problem of memory.

  How many modules is installed?

  Your PC has the Leonite2 motherboard?

  If yes go to the paper web. There is a section that has a picture and explains how to clear the CMOS settings. Reset the settings and then try to start Windows.

  Please post your results here.

  Jacobjr wrote:
  The first tone is about 2 seconds, the next closed to 6 seconds, and if it continues. Recently replaced default graphics card. Does anyone have an idea what could be the problem? It is not the graphics card and all the fans are running. Help is appreciated.

  Best regards

  ERICO

• Pavilion DV7-7000 computer laptop: need to recovery my laptop Pavilion DV7-7000 software

  I need to buy recovery software FRO my laptop... where I can do?  Here are the specs.

  HP Pavilion dv7t-7000 CTO

  Serial number.         [Personal information]

  Product: A3F79AV

  Thank you

  Frank

  Hi, Frank:

  To order the recovery media for your laptop, click on the link below, select the OS from W7 in the menu drop down and the last line on the page is where you can order recovery media.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv7-7000-entertainment-notebook-PC-series/5226224/model/5273846