Pavilion DV9008DR Nvidia coprocessor SMU driver won't load

After finding drivers almost everywhere, I met several for the 340 Nvidia nForce / GeForce 6150.  Some are for Vista (from HP), a set for Win7/Vista from Nvidia itself.  All have one thing in common.  The 'coprocessor' remains 'driverless' after the Nvidia installer is done.

Looking at the PCI device ID, is seller 0x10DE (NVidia) device x 0271 coprocessor (nForce System Management Controller).

The driver load without difficulty in XP, but the updated driver won't Win8.

A thought has this load manually through Control Panel Device tool as an update of the driver selected with its .inf file.

It is a driver that this continues to be a complete installation.  If it will not charge, what will be missing.

Dan-

I do not quite know compatibility mode, but I've done the following with the NVidia 15.49_nforce_winvista_win7_32bit_international_whql.exe driver package that is very similar to sp36079.exe

1. launch the .exe.  As before, it loaded everything except the NVidia coprocessor driver.

2. went to the Control Panel Device Manager

3 find the coprocessor and went to properties-> Driver-> update driver.

4. browse for the file SMU in the .exe 'burst' (including the .inf, .cat, .sys, etc.

5A accepted.

6. received the message that this driver installed.

7. looked in Systedm devices and found nVidia nForce PCI System Management.

8 looked the driver version and found it wasn't NVidia, but Microsoft, Date of 06/21/2006 driver Version 6.2.9200.16384

If something happened, but no idea what it means.  (maybe the driver was already there, but need to Win8 "inviting them to find it?)

Tags: Notebooks

Similar Questions

  • NVIDIA Stereoscopic 3D Driver Service disabled makes Firefox slow start (even if related plugin is set to never activate)

    The problem I encounter is that I disabled the 'NVIDIA Stereoscopic 3D Driver Service"my msconfig configuration. After a reboot when I started Firefox there is a huge delay (2-3 seconds) showed a white screen (which indicates a wait for a timeout).

    Now, before pointing at NVIDIA (which I also finger pointing here), I want to clarify, Yes, there's a plugin installed in Firefox (NVIDIA 3D VISION), but it has been set (disabled - never activate). So I wonder why would a disabled plugin that is configured to start never attempt to communicate and causing a such time-out at the start, it makes little sense to me.

    Hi TaohRihze, I don't know, but this also occurs when you have disabled hardware acceleration? And who is an extension required for your graphics card?

    Instructions below:
    Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

    You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    1. Open the Firefox Options (Preferences on Mac or Linux) as follows:

      • In Firefox 29,0 and above, click on the menu button

        then select Options Preferences on Mac or Linux, or Windows.

      • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
    2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
    3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    4. Now restart Firefox and see if the problems persist.

    In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

    This solve your problems? Please report to us!

    Thank you.

  • Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

    Hello

    I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

    Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

    I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

    But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

    Any ideas or suggestions?

    Hello

    Go to BIOS and set it to default settings.

    In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

    However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

    + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
    http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

    + How to integrate the AHCI driver during the installation of Windows XP.
    http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  • M30X bios does not detect the hard drive, won't start HD

    Can someone help me in this problem.

    My satellite m30x hard drive won't boot, rather trying to boot from the network.

    Tried to load the installer by default, and Hd will not appear on the settings

    tried original reistal toshiba software CD and the message that no target disk appears

    Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

    Thanks in advance for some light on this problem

    My M30x has the same problem. I just used 2 months.

    I sent it to the repair center as I was told to do, because it has guaranteed.

    I'm still waiting for a response from them. I don't know what caused it.

  • HP Pavilion a6110n: NVIDIA rejected updates

    This box has started with Windows Vista Home Premium and has recently been upgraded to Windows 7 Home Premium. The installation was relatively smoothly and I was pleasantly surprised when I was told that he is qualified for the upgrade of Windows 10.  29, I received a notice that this computer is not compatible with Windows 10.  The reason for this is (NVIDIA GeForce 6150se nForce 430) the display manufacturer did not your screen compatible with Windows 10.  Check with the manufacturer for support.

    Since then, I made sure the pilots were up-to-date and tried to even install the optional updates for this program and face the problem of having an update NVIDIA rejected, which gives the error code 80070103.

    Any suggestions how I could work me through this quagmire?

    Thank you

    Bill

    According to the NVidia forums they do not provide Windows 10 drivers as the onboard graphics card is now 10 years old. It is causing massive headaches for firms with not very old at all HP devices that had planned to consolidate their estate on Windows 10.

    HP really needs to apply pressure to NVidia to deliver a Windows 10 driver to avoid prematurely obsolete HP devices.

    Bottom line is that until NVidia includes a driver, your choice is to buy another motherboard - not really financially prudent - better buy a new desktop computer. Just to say maigh t be unwise to invest in a device from HP, if they can get their suppliers to keep their drivers up to date.

  • Win7 hp pavilion n040se 15 notebook pc driver for win7

    Hello

    I need win7 hp pavilion n040se 15 notebook pc driver for win7!

    anyone can help me?

    You should be able to use most drivers of this model. Don't use a BIOS or Audio from there.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 6521367 #N1162

    Audio Realtek: Choose High Definition Audio, accept the agreement, download and install the driver of first or second depending on whether you installed Win 7 32 or 64-bit:

    http://www.Realtek.com.tw/downloads/

    Don't know what wireless card you have since HP uses different brands. If the doe doesn't work, you will need to get the id of the hardware it from Device Manager.

    IF you have Atheros QCA9000 Wireless Qualcomm:

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359407 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_128686_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    Atheros Bluetooth:

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359407 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125590_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  • Pavilion A4316f: HARD 6 to drive not recognized

    6 TB of Seagate HARD drive internal SATA installed OK but appears as a 1.5 TB in the BIOS and Device Mgr.  BIOS = v5.13.  OS = Windows 7 64 bit edition Home premium.

    Seagate DiscWizard (latest version) says: "cannot run Seagate Manager of extended capacity.  Some large drives can be detected on your system because it uses a version of the nVidia disk controller driver does not support. »

    Paul suggested NFORCE DRIVER VERSION 15.56 (Windows 7, 64-bit)
    http://www.nvidia.com/download/driverResults.aspx/30520/en-us

  • Adobe Flash Drive won't let me uninstall it

    Adobe Flash Drive won't let me uninstall it from my computer and the software that has been added with it, then a pop up of Adobe said that you'll never

    Remove it from your system! It is a too important control for this software to have!

    mernetta @ aol.com

    Hello

    ·         What operating system do you use?

    ·         What is the exact error message you get?

    ·         Are you referring to Adobe Flash player?

    ·         Why are you trying to uninstall Adobe flash player?

    You can visit this link and check if it helps:

    Uninstall Flash Player | Windows

    http://kb2.Adobe.com/CPS/141/tn_14157.html?promoid=DNRTE

    You can visit the   Adobe Flash Player Help and Support page   help with questions Adobe.

  • HP Pavilion dv7t 3300: replacing hard drive SSD with the recovery DVD

    My Pavilion dv7t3300 has two hard drives... A SATA 500 GB of data and an SSD 128 GB containing the operating system and other programs.   The SSD drive that contains the operating system failed.  When I install the replacement SSD, I intend to use the HP System recovery DVD (2) which came with the unit.  If I load the recovery disks will be erase/format all my data-files in the 500 GB drive.

    The new drive is "naked".

    Thank you for your help

    Tim

    I just remove the second disk while making the recovery operation and slap it in when the process is complete. Better safe than sorry. Theoretically, the recovery disks will not affect the second drive, but it's really easy to be sure that they will not be 100%.

  • Combo DVD - RW drive won't burn a disc

    All of a sudden yesterday after burning DVDs my DVD - RW combo drive won't burn a disc. I tried to run the Microsoft patch for CD DVD stuff and he said:

    the selected disk is not able to write, if you have multiple CD DVD players try to use another drive, otherwise you may need to install a CD DVD burner to burn with Nero, it says: this device needs a DVD R/W... and the fix format disc, it says the drive is not capable at all.  Also, when I go to the drive in my computer, it shows the drive as a CD drive.  I replaced the Combo drive with a new one and still have the same issues. Help!

    Hi Mkadv,

    ·         Have what Microsoft Fixit you tried?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: CD-DVD combo drives have two lenses to write CDs and DVDs, respectively. First check with the manufacturer of the computer if the glasses are intact.

    Method 2: To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.

     

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems

     

    Method 3: The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.

    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

    http://support.Microsoft.com/kb/321641/

     

    Let us know if that helps.

  • HP laptop - 15-r244tx: NVIDIA graphics card driver not to proceed with the installation of my new laptop HP 15-r244TX (portable)

    I bought a new laptop HP 15-r244TX. When I'm looking in the Device Manager I can see that the 2 drivers are not installed:

    1.Intel (R) 8 series xHCI HC - 9 31

    2.3D video controller

    When I try to install NVIDIA graphics driver an error is coming as driver intel not installed.

    I installed Windows7 (64-bit) and downloaded the driver on the site of hp for this model of laptop.

    In my view, 3D video controller represents the NVIDIA graphics driver.

    Please help me so that I can properly install these 2 drivers.

    Hello:

    That's what I suggest you try...

    1 install the utility driver Intel chipset installation and reboot.  The second listed file is the auto install file.

    https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-

    2. install the Intel HD graphics driver and restart.  The first file listed is the automatic installation file.

    https://Downloadcenter.Intel.com/download/25232/Intel-Iris-Iris-Pro-and-HD-graphics-driver-for-Windows-7-8-8-1-64bit

    3. install nvidia HD graphic driver and restart.

    This package provides the driver that allows the graphics from NVIDIA high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp69609.exe

    If the graphics drivers from nvidia at the address above do not work, try one directly on nvidia...

    http://www.nvidia.com/download/driverResults.aspx/89121/en-us

    The xHCI Intel (r) 8 series HC - 9C31device this driver needs.  Download, unzip and run the setup.exe file.

    https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

  • Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

    Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

    Hello

    Detect and automatically fix problems of CD/DVD
    http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • My CD drive won't burn

    My CD drive won't burn a cd, it will try to burn them and then writing on the cd it says: an error has occurred. How can I solve this problem?

    Hello

    1. What is the full error message you get?

    2. what type of disc you are trying to burn?

    3. when the problem started?

    4. have you made changes on the computer recently?

    I suggest you try the fix it from the link given below and check if it helps.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Hope this information is useful.

  • NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

    NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

    Message that appears is: -.

    Windows has stopped this device because it has reported problems. (Code 43)

    BB

    Install the latest driver from nVIDIA:

    http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

    http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Pavilion N5415 notebook replacement hard drive

    I have an older Pavilion N5415 Notebook and hard drive died. HP no longer wears the replacements I can order online. The old drive is an IBM & reg Travelstar 4200 RPM 10 GB, ATA/IDE, 2.5 "x 9.5 mm. I need to know what I can safely replace this drive with." I found one on amazon.com with the following specifications and I need to know if it will work:

    • Hitachi Travelstar 4 K 120 HTS421280H9AT00 80 GB portable hard drive
    • Buffer 8 MB spindle speed 80 GB storage capacity IDE UDMA/100 4200 RPM interface
    • 7.1 ms average latency average 11 ms read seek time format 2.5 inch 9.5 mm drive height factor

    What other specs do I need to be concerned in addition to rpm and physical size?

    Thank you!

    32 GB is only a problem on some old computers... no need to worry. Once you have passed this barrier the next barrier is 137 gigs which does nothing more than 120 concerts can be used. I don't know the N5415 will be executed against this barrier. So whatever it is a disk of 120 Go up is ok and not better or worse than a smaller drive. Indeed, young readers tend to be older design, which means that they are running more hot and use more power.

Maybe you are looking for

  • Upgrade memory

    I have an iMac in late 2008 with the DDR3 2 x 1 GB 1067 MHz memory modules. I want to improve it and I need to know if 2 x 4 GB 1866 MHz DDR3 ECC SDRAm is compatible? Otherwise, suggestions for alternatives. I'm in New Zealand so can be a bit restric

  • Satellite L10-202 & Creative Audigy ZS PCMCIA Notebook2 - does not work

    Hello! I bought Notebook Audigy 2 PCMCIA yesterday and I have a big problem. My laptop Toshiba Satellite L10-202 (Celeron M 1.6, 512 DDR, PCCARD II with Texas Instruments PCCARD controller 1410) does not detect the card Audigy. What should I do to so

  • USB does not work on Satellite A60

    I had some problems with my A60. He was not running on Windows XP in normal mode, safe mode only; After some research, I put to update BIOS to the latest version and also reinstall WINXP PRO and all the original drivers. But now that everything works

  • NIReport_Print LabWindows 2009 vs. 2010

    I have the code met under LabWindows 2009 that works, but when I complie under LabWindows 2010 it stops working. I am creating PDF files using Adobe Distiller, functions such as PrintPanel and PrintTextBuffer work in 2009 and 2010.  However,. NIRepor

  • I have an idea to create a cartoon. I have the idea and the script but I can't just think how to do it. Anyone?

    I have an idea to create a cartoon, I just can't figure out how.