Pavilion dv9743cl: Boot problem

Similar Questions

• Boot problem - which means 'nothing' begins or displays on the screen

  Boot problem - which means 'nothing' starts or displayed on screen (white, black screen).  Do 'hard boot' to the CPU, then Ctrl Alt Delete & to get to the Task Manager.

  In the process, I see the problem of the wercon.exc process.  Once the process is complete, I can use the computer.
  What is the "fix" for this House of Vista Have.
  Thank you

  Hello

  You can view these methods:

  Method 1 : run Startup Repair and check if the problem is solved or not.
  What are the system recovery options in Windows vista?

  Method 2 : run system restore and check if the problem is solved or not.
  What are the system recovery options in Windows vista?

• System on Pavilion dv9743cl recovery - so it will clear the second hard drive?

  Hi guys. I have a HP Pavilion dv9743cl and it has 2 separate hard drives. I intend to use the system restore to reformat and reinstall Vista, and I was concerned that it would wipe out the second disc as well.

  I looked on the forums, and some posts said that there is a recovery of the system or with Reset option. I do not have this option; I only have the system recovery. Do you know if the rail with it reformatted my second drive? Thank you very much!

  Disconnect the 2nd drive.

• HP Pavilion 17-e148ca computer laptop: HP Pavilion 17-e148ca Notebook PC Boot problems

  Hello.

  I bought a Hp laptop pavilion 17 notebook pc freedos 6 months ago and rejoices. I downloaded and installed Win8x64 OS (speaking truth, I do not remember how I created the partitions and which cases).

  I was working and suddenly my laptop computer is not responding. Of course, I did a reboot, but it isn't any result. I said a lot of time, but starting is frozen on hp glitter logo.

  I also tried perform a recovery using the buil options (there are a lot of different options: restart, update, recovery and other), but there was no mistake in all cases.

  Using the command prompt during Windows 8/10 installation of the USB boot disk / boot DVD Disk does not help: list command shows nothing except virtual disks/DVD volume.

  I also have been download and try many LiveCD iso boot to create/recreate the partition, but again - no results - hard drive is not visible/available. The only time wherever I saw the hard drive was help from minitool partition Wizard 8.1.1 of livecd, but the fact is that I have no time to make any changes, because he had an unpredictable reboot without no reason.  After that I saw not the hard drive. I don't know what to do.

  Could someone help me?

  Thank you.

  Your partition is dead, son, you need to open the back of your laptop and remove the hard drive and then put it in another machine that you use windows8 or 7 and restartine on cd or flash or whatever you use for bootin' and format the c / partition / after that, you can reinstall the hard driver in your laptop to reboot on your installation cd. and I hope you'll see where to install your system. After that, you can divide your hard disk, you can

• Start up and boot problem. Hard drive error. HP pavilion laptop Home Premium. Windows Vista preinstalled. No cd came with it.

  Nothing new added to comp. Got the hard drive error message and followed the instructions to fix/repair. All translations tried (almost every test suggested/memory/hard drive, etc.) could find NO problem with the memory or hard drive.  Once I have pass the problem to boot/start the computer works fine!   Crazy!  Any sugg. would be appreciated.

  Hello

  ·        Since when are you facing this problem?

  ·        What are the fix and repair that you tried to solve this problem?

  ·        Outside this disk verification error, do you get any other error message?

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  ·        Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  ·        Click on continue or provide administrator credentials if prompted.

  ·        In the command prompt window, type the following text, and then press ENTER:

  ·        sfc/scannow

  ·        You should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  ·        % Of verification complete.

  ·        Once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

   

  Method 2:

  I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.

  a. click on start, then run.

  b. in open, type cmd, and then press ENTER.

  c. use one of the following procedures:

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  You can see the article mentioned below for assistance.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3:

  I suggest you to do a system restore. Follow the steps mentioned in the article below.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Pavilion dv7 1245 dx boot problem

  Hey everybody,

  Just FYI, I have a dv7-1245dx with a VISTA OS and hard drive of 320 GB.

  I was unable to boot my dv7 for about a week when (I think) the hard drive crashed while the computer is running. I ran the disk hard main self test and received 301, 303 and 305 errors but there always going the SMART control - so the hard drive is shot. System memory is 100%.

  I want to be sure that there nothing else wrong with it before you buy a new hard drive. I tried from a disk external drive with Windows XP is already installed, but just at the point where it begins to show the loading Windows screen, he flashes a BSOD and restarts. Is there anything else I can do to diagnose what is wrong or it's probably just the hard drive?

  Also, what are the brands of hard drive are compatible with the dv7?

  Thank you.

  Hello

  The errors you mention in your message, it seems the hard drive failed - this is by far the most likely, although it may be related to other problems, for example the Sata controller on the motherboard, hard drive replacement is definitely the best place to start.

  An example of the type of HARD drive that fits your laptop is on the link below.

  Hard drive 320 GB

  A test of futher you can try to check your laptop is to create a bootable Ubuntu CD.  You can run this OS directly from the CD (that is, there is no need to install on the HARD disk).  The guide and the download is on the following link.

  http://www.Ubuntu.com/download/Ubuntu/download

  Although the operating system running from a CD will be slow, it should show if everything works (apart from the HARD drive).

  Kind regards

  DP - K

• 15-P152NU Pavilion: Pavilion/closed sleep problem

  Hello everyone! I write for the first time and I hope I do it in the right section.
  So, I recently bought a new 15-P152NU Pavilion and it is great but there is a very annoying problem right from the beginning that drives me crazy I tried almost everything I might have found on the Internet and still found no solution. So my problem is this - when I use the laptop for periods of solitaire (over an hour) it won't go to sleep or off. When I try to do a stop/standby the screen would turn black and the cover and the fan would stay. What I noticed is that if I try to shutdown/sleep when I used it for periods short (10-20 minutes), it would be nice and the fan and the cover would be turned off. But otherwise they would stay and my copmputer essentially dies and I have to press on and hold the power button and then start all over to get to the race. I tried to leave it any longer (I left it overnight) - without success. I don't know either it is based on the temperature of the cpu or a process which starts after a certain period of time, but I was really tired so I hope that I find a solution here. What I've tried so far is:
  
  -Adjust the advanced settings in Power Options.
  -Disable Hibernation
  -Update/restore Intel HD Graphics Family and almost all drivers which could be updated / restored.
  -Run the troubleshooter in Windows
  -Disable Boot (Restart) fast
  -Looking for a process that interrupts sleep and stopping by using powercfg-queries. All say no
  -Looked for a setting in the BIOS that could prevent the stop/standby - found nothing related...
  
  I'm really tired of this so I'll be looking forward to your answers. Hope someone can help me.

  Hello, @Sparkles1,.
  
  And thanks for the reply to my post. Fortunately, I managed to solve the problem. I found a solution after a long reading on the Internet. You, it might be useful for other users, I will share it than what has worked for me.
  
  1. go in Control Panel -> Device Manager
  2. expand System devices
  3. find Intel (R) Management Engine interface -> right click-> properties-> driver

  4. check the driver version. If 11.x.x.x , you'll probably face my problem.

  5. uninstall the driver. Restart your computer.
  6. download the old driver (version 9.5.15.1730 5 M) by https://downloadcenter.intel.com/search?keyword=intel+management+engine and install it. Reboot if requested.
  
  That's all. This did the trick for me. I hope it will be useful for other users too.
  
  I'm sorry I didn't post my solution earlier, but I had completely forgotten that I had posted here. Anyway thanks for your reply. I think that the forums of HP is an amazing place.
  
  Happy holidays!
  
  Krasimir Shontov

• Pavilion dv7: boot after ram update loop

  Hi all

  IM owner of laptop HP Pavilion dv 7. It has 4 GB of RAM (a single module of 4 GB) so I decided to uprgade it. I bought another 4 GB module as its specifications described in (different manufacturer installed one), put it in my book and since then I can't start Windows.  After turn on, boot menu started, that shows the loading screen windows with HP logo, but in a few seconds the screen goes black and everything started again. Startup Repair do the same thing. BIOS showed I have 8 GB of RAM. Any ideas what is wrong? I've seen a few topics with the same problem but no solution how to fix it.

  Thank you

  Hi @piotrSVK ,

  It shows me in your manual page 25 your system supports (DDR3, 1 333 MHz) memory modules. The installed memory is incorrect for this system and could cause problems.

  Thank you.

• G7-2269wm Pavilion: update BIOS problems

  I have a HP Pavilion G7, which recently had a bad encounter with a 'spill '.  Not at all turns.  I replaced the card mother and keyboard.  Now it turns on, but it does not boot to Windows.  Looking in the BIOS, I realized the version is very old and it lacks certain robot like legacy and UEFI boot of choice.  I am looking for a way to Flash the BIOS with a current version, but so far have not found a solution that would work in my case.  Is it possible to make a bootable media with the BIOS version I want to use and Flash the BIOS on the HP Pavilion?  I would appreciate any advice you can give.

  Other things to note.  I remove the hard drive and disc control execution on him and he has no problem.  When I boot from a disc to install Windows on the HP with the original drive installed, I can access the drive through command prompt and see that the installation of Windows is intact.  The hard disk is configured for the GPT, and as the BIOS limited startup options, I came to the conclusion that the BIOS needs to be flashed.  Thanks for your time.

  If the drive with another installation of Windows allowed me to launch the BIOS install package and Flash the BIOS with the latest version.  After it finished, I reinstalled the original hard disk and the computer loads Windows now on the original hard drive.  I thank very you much for your suggestions TheOldMan.

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Pavilion DV9008NR BIOS problem 8 32-bit Windows

  I have a mobile Pavilion DV9008NR older:

  RAM - 2 GB RAM

  CPU - Athlon Turion 64 x 2 TL-50 1.6 GHz

  Motherboard - Quanta 30B 9

  Chipset - NVIDIA GeForce 6150

  Southbridge - NVIDIA NForce 410/430 MCP

  BIOS HP F.43 22/03/2010

  -GPU of NVIDIA GeForce Go 6150 (UMA) (MS Bsic Disply C52 A.2 adapter graphics card

  This has been previously loaded with WinXP SP3 with nLite slipstreamed 1.42 to load SATA drivers.  He was previously the BIOS flashed to F.43 (latest version).

  He was 'clean' updated with Windows 8 Pro Upgrade after passing all the tests.

  After reboot, I got the standard HP/Phoenix BIOS screen with the usual guests for BIOS Setup and boot order.

  Every time after that, the guests disappeared and Win8 charge * fast * as usual.

  Feature to win 8 seems to be in good condition, and necessary Ricoh 5-in-1 and drivers NVIDIA coprocesser loading without difficulty.

  I went back to my old image of WinXP and loaded several times BIOS normally with and invites you.

  After reloading Win8, back to problems of any invites after the first reboot.

  Try or during the BIOS support is * not * enter you the BIOS or boot order Setup.

  It seems that somewhere Win8 is "anticipate" normal "flow" of the BIOS.

  I understand that Win8 has a feature to take control to prevent the takeover of boot sector malware.

  Is this what is happening?  (Which becomes a real problem with and may be necessary).

  Is this a bug in the BIOS, or

  Is there something else.

  Thank you ~.

  Just talked to the MS Support for something different and wondered about it.

  Obviously, on some machines, this is * normal * and is the result of the function "Secure Boot.

  The answer is... you need to use the 'restart' instead of 'Shut Down' to prepare the system to give the menu .

• Pavilion g4: startup problem

  Hi all

  I am facing a strange problem where my computer worked fine until last night. Before turning off my laptop, it prompted for an update where I chose 'Update AND turn OFF'. Since the morning my computer does not respond.

  When I tried to boot the system in the morning, it shows just the HP logo and endless treatment happens for more than an hour. After a while, I stopped the system and tried to turn it on again where he showed that "AUTOMATIC SYSTEM REPAIR. After a while, some screen appears as "SOMETHING is ALL WRONG WE ARE REBOOTING FOR YOU" she getting never rebooted again.

  When I tried to boot my system again, that's close immediately after 10 seconds or more.

  Can someone keep me updated what to do about the problem.

  I can't do anything with my laptop now.

  Please keep me updated as soon as POSSIBLE

  Thanks in advance

  Hi @jags_1,.

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP Pavilion g4 Notebook and get a Logo screen at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to computer does not start for Windows 8.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  Please let me know how it goes.

  Thank you.

• HP Pavilion dv6 Notebook problems and I know that this is not a virus

  Hello everyone I need help! :[

  Right now I feel "AAAAAAAARGHHH!", because my laptop was bad, since we bought it on Amazon. I got it for everything... 1-2 months (we got it in June) and I had problems really bad-_-"'

  The following events did my hair set on fire:

  Random memory dumps and no explanation for it (it says something like NO INFO DATA or something like that)

  My laptop is so freakin ' hot my legs are close to combustion

  It freezes at startup times and makes me do a difficult start

  It freezes when everything is STABLE!  I move my mouse sometimes and poof! FREEZE ALERT

  It is weird stuff at the beginning up resembling CHKDSK and boot scan, but I'm not so sure...

  So can someone help? Its under the warrantyso I could do maybe deported but I don't really know what is wrong first

  Here is some info:

  Laptop: HP Pavilion dv6 Notebook PC
  Processorentium (R) Dual-Core CPU T4200 @ 2.00 ghz 2.00 Ghz
  Memory (RAM): 4.00 GB
  System: 32-bit operating system

  Help :/

  your first mistake is to use the laptop on your lap. In the manual it says do not for this. never. Looks like your laptop is random questions causing overheating (probably by something blocking the ventilation openings) with the system board. If it is under warranty. maintenance operation.

• HP Pavilion tx 2000 problem

  HP Pavilion tx 2000

  Hi, I upgraded my laptop to Windows 7 from Windows Vista, then I put online to search for my graphics driver, I found my Nvidia driver and download it. After that I can not boot my computer laptop but can only start saving mode, I followed a statement online and system restore to remove the driver and my laptop can start windows again.

  2nd, I run dxdiag, and then I discovered that my laptop directx features are all not available below is the report:

  ---------------

  Display devices

  ---------------

  Card name: Standard VGA Graphics Adapter

  Manufacturer: (Standard display types)

  Type of chip: NVIDIA

  DAC type: 8 bit

  The device key: Enum\PCI\VEN_10DE & DEV_0244 & SUBSYS_30E5103C & REV_A2

  Memory display: n/a

  Dedicated memory: n/a

  Shared memory: n/a

  Current mode: 800 x 600 (32 bit) (1 Hz)

  Name of the monitor: generic Non - PnP monitor

  Monitor model:

  Monitor-Id:

  Native mode:

  Output type:

  Driver name: vga

  The driver file version: 6.01.7600.16385 (in English)

  Driver version: 6.1.7600.16385

  DDI version: unknown

  Driver model: unknown

  Driver attributes: Final retail

  Driver Date/size: 2009-07-14 07:25:51, 10752 bytes

  Would be WHQL logo: Yes

  Date stamp WHQL:

  The instrument identifier: {D7B71E3E-4104-11CF-8D33-550D0CC2CB35}

  Vendor ID: 0x10DE

  Device ID: 0 x 0244

  SubSys ID: 0x30E5103C

  Revision ID: 0x00A2

  Strong name of the pilot: unknown

  The driver rating: unknown

  Video Accel:

  Deinterlace caps: n/a

  D3d9 Overlay: n/a

  DXVA-HD: n/a

  DDraw status: not available

  D3D status: Not available

  AGP status: Not available

  This is the reason why I can't play the games like warcraft3 requiring the rite of the Direct3d acceleration?

  Can you help me solve the problem?

  THX.

  Hello

  Sorry, but HP is not currently supported on your laptop with Windows 7 drivers.

  You can try dowmloading the NVIDIA GeForce Go 6150 WHQL driver from NVIDIA. . Try the detection function on the page of the NVIDIA driver.

  You may find that a driver that can be used for the games is going to be difficult with Windows 7.

  Have you tried Windows Update? I just read that there is some news of NVIDIA GeForce Go drivers available.

  Best regards
  ERICO

• Tecra S10 - 123 and Linux Mandriva boot problem

  I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.

  What can I do?

  Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?

  Work the other flavors of Linux? Maybe Ubuntu will install properly.