Pavilion Elite HPE-180 t, windows 7 64 bit started to stop the sleep mode.

Similar Questions

• Replace the HARD drive in the new Pavilion Elite HPE-180 t.

  I'm not a professional computer, but after 30 years of use, the upgrade and repair PC home and the office, I'm embarrassed to post this thread - but here goes.  I took delivery of a few days ago the new highest indicated HP computer model in the topic of this thread.  The new computer is beautiful and everything worked perfectly from the start.  I decided after a few days to check, everything was fine and proceeded to a few pieces of hardware to transfer from my old Dell (a fairly new 1 t WD SATA HDD on which coied got a lot of data from the former count and a new BD/DVD ROM SATA optical drive).  Everything was fine once I figured out how to get these two drives in the enclosure waterproof on the new computer, but all reconnecting the SATA cable on the main came with the computer HARD disk, I broke up some pins on the HARD drive that made it of course useless SATA port.  I of course take full responsibility and do not wish to get involved with HP technical support to replace the disc - and frankly, I prefer not to put another HDD Seagate support because I prefer a 1 t Cavier Black SATA WD which I believe is one of the most reliable RESEARCH on the market right now, and I can buy it for around $200 instead of the $400 I uknderstand fresh HP for the same size of Seagate replacement.

  Here's my question, can I just buy a new HDD WD and install it with my own final Win 7 x 64 without the HP recovery disks (they did not come with the new computer, and I had not yet created my own recovery disc).  Frankly I'd rather have a completely clean install of my Win 7 OS without the HP partition and other HP software on the HARD disk.  Is this possible or HP has some sort of identity with their software which must correspond with the BIOS or something like this?  REALLY, I don't want to return the computer to HP to get called into service because I just started a small business that involves a lot of video editing and I can't be without the computer for weeks, while HP is concerned with him (I've read the horror stories about the high cost of the repairs and the long repair time but I do not wish to keep my warranty if possible).

  HP Pavilion Elite HPE-180 t; 2.8 Ghz quad-core Intel i7 CPU; Intel x 58 chip; Win 7 64 bit ultimate OS. 12 G RAM;
  1.8 NVIDIA GeForce GTX-260 G graphics card; HP w2338h HD widescreen LCD monitor

  I have the same PC, only the model number has been changed.  Yes, you can use your own license W7 and install it on another drive or a replacement drive.  You can get the drivers from the HP site web support HPE-180 tfor your PC or other sources.

  Some software manufacturers third HP is very useful, so you might want to consider ordering the HP recovery discs and make a full recovery to factory.

• Windows Vista premium edition starts only with the safe mode or safe mode with network.

  There was a low voltage or surge protector and the computer came out. System Restore does not work.

  Hi ValrieSingh

   

  1. have you tried to start in normal mode after the issuance of the power?

  2. what happens if you start in normal mode?
  3. do you get errors in normal mode?

   

  You can check results when you activate the mode low resolution. It starts Windows using your current video driver, frequency settings low resolution and refresh. You can use this mode to reset your display settings.

  See also the links below for help on the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  I hope this helps.

• Windows 7 64 bit, start slowing down, the desktop icons and taskbar of loading very slowly since last week!

  so first, I'll start with my system features:

  Reference Dell Xps15z
  Intel Core i7 - 2640M to 2.8 ghz
  NVIDIA GT525M 2 GB
  8 GB RAM
  Windows 7 Home Premium Service Pack 1 64-bit
  Samsung PM830 SSD 2.5 "7 GB 218, 42 GB of free
  My laptop is now just a year and plays well outside some blue screen errors that have been fixed. The question now is time to start being significantly slower, especially the loading of the office. It takes 15 seconds to the password screen, to 45 seconds to reach the office and another 45 seconds to the taskbar, icons and things on the desktop to load. What is unusual is that during this black screen, my mouse is displayed, as well as for Advanced System Care 6 performance monitor (I doubt that this is the problem as I had installed for some time). I did the troubleshooting on mine and removed about half of my program without success. I also checked the health and performance of my SSD with SSD and SSD life and both seem to be very positive. I did not any changes to the Bios because I don't want to reinstall my OS and I'm not really sure on workarounds.
  I tried also to the difficulty of the task of explorer.exe, by checking the value of shell in the registry and it is correct, that it just load slowly at the start and each time I kill and then open it again in the Task Manager. Therefore, I think that my main problem is with explorer.exe loading slowly for some reason, I also removed some desktop icons and taskbar, although I doubt that it makes much difference.
  I've also done many scans with malware bytes pro and hitman pro, there is no virus on my computer.
  I appreciate any help, as it is very inconvenient for my more than 90 seconds start time, when he was about 20 when the laptop was new.
  Thank you very much for your help!
  P.S. I have about 60 GB of games installed on my pc via steam, if it makes a difference to delete some

  When my Windows 7 is slow to start, I do the following:

  Start, then in the search box, type of race. In run, type "msconfig"(sans guillemets), and then click OK. ""
  In the general tab, make sure that selective startup is selected.
  Under Selective startup, clear the check box load startup items.
  Then go to the Startup tab and disable everything except software antivirus and important such as the microsoft. In addition, DO NOT disable any program that you do not recognize.
  This will disable any unnecessary background programs and prevent to launch at startup.
  NOTE: you can still start programs even if they do not start at startup. For example, your favorite game is one of them, and you the disabled. Now, the game does not start at startup, but if you click on the game icon later, it will always start, except maybe a bit slower when it starts. Basically, you are delaying the start of programmes which does not need to start at startup, you move a part of the start-up BACK period. The only programs that you do not disable is programs that actually need to start (like if it starts your computer will blow or something similar).

• HP Pavilion Elite HPE-180 t CTO: multimedia card reader does not work

  The provided HP 6-in-1 multimedia card on the upper drive before the computer has stopped working. This computer is running the Microsoft 64 - bit Windows 7 home premium, I can't find any information on the card or drive driver on HP or sites in the HP user guides. I had to buy a support external USB, card reader to import photos from the cards. Do you have an idea where to find a driver or how to re - turn on the card reader? He simply stopped communicating. What can be done to make it work again?

  Go back to a restore point is not a viable solution. There are too many updates on this computer because the problem occurred. In addition, returning to a previous restore point does not solve the problem. I continued my research and found the solution on the Microsoft support forum.

  Step 1, uninstall the 'readers' listed under MOBILE DEVICES.

  They all have an error "this device cannot start Code 10".

  Restart the computer.

  Plug a carf Compact Flash and Device Manager reports:

  "WPD filesystem Volume driver does not (code 10)".

  With a card in the reader:
  Select START > > > right click COMPUTER > > > select Manage
  Under STORAGE select DISK MANAGEMENT
  Flash cards will appear in the middle like a FAT Partition window in good health
  Right-click next to the icon
  Select the paths AND the CHANGE of DRIVE LETTER access
  Select Add
  Select the radio button OK (assign a new drive letter or path)

  Windows will automatically assign a new drive letter
  Click OK
  Close computer management

  The computer will recognize the Compact Flash, SD, etc and you can select what you want to do (such as open in the file manager).

  Restart the computer.

  Connect a Compact Flash or SD card.

  The system will recognize the card.

  If it is not the case, repeat the procedure for this type of card management.

  This solution really works.

• Pavilion Elite HPE-180 t: Pavilion HPE-180 t update video card

  Hi all -

  I'm hoping to get an official word on the question of whether my machine (mentioned in the topic) is able to handle a graphics card, I just picked up.  The port seems compatible and there seems to be room, but I'd be more comfortable upgrading if somebody here has estimated that the hardware is compatible.

  The map I picked up is a Radeon R7 - 260 x - CDF.  If you do not feel that would work, is it a good (affordable) map out there that I could pick up that will be?  Thank you!

  Hello

  Check with the manufacturer of graphics cards specific and find out if the video BIOS on the card will work with a PC that uses a legacy BIOS.

  Find out what the return policy is before you buy.

  Thanks for posting on the forum.

• USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

  I turned on a HP Pavilion Elite HPE this morning and none of the USB ports work under Windows 7.

  Mouse and USB keyboard work well in the BIOS Setup.  But after Windows starts, it is as if he found neither.

  I tried to start Windows in Safe Mode and last known good Configuration and the behavior is the same, the mouse and keyboard do not work even if they do it in the BIOS.

  I tried a different mouse and keyboard and Windows behavior is the same.

  Now, I would like to have active remote destop. Difficult to solve without an input device.

  I found a solution for Windows 7 x 64 failing to detect any USB device on all ports USB to a HP Pavilion Elite HPE-500f.

  After that backup, read and edit the registry remotely to run the utility of Microsoft Devcon registry run key, Devcon announce an error message 39 for USB hubs.  Enter 'Windows error 39 usb hub' in a search engine led me to the next web page that describes the resolution of the problem. I removed the UpperFilters also well described and restarted key and until then. -See more at: http://www.tricksguide.com/solve-device-manager-error-code-39-on-usb-controller.html

• Elite HPE-180 t & ATI HD 4650 - Best Way to 3 monitors?

  I have 3 monitors:

  1 asus 23.6 in. [DVI, HDMI, VGA]

  2 asus 23.6 in. [DVI, HDMI, VGA]

  3 LG 22 in. [HDMI, VGA]

  What I read here and since I have not been able to get 3 monitors running off my ATI HD 4650, I'll try to find the cheapest, best that my system can handle and better long term to use.

  So, here are my choices:

  1. install another PCI card?

  A. suggestions?  Low cost...

  2 USB 2.0 VGA/DVI/HDMI graphics card

  A. suggestions?

  Thank you

  Glee

  Here's my setup.

  PC HP Pavilion Elite HPE-180 t

  AZ222AV #ABA

  • Genuine Windows 7 Professional 64-bit
  • Intel Core i7 - 920 quad-core processor [2.66 GHz, 1 MB L2 + 8 MB of cache N3 shared]
  • 16 GB 1066 MHz DDR3 SDRAM [4 DIMMS]
  • 1 Terbite SATA 3 Gb/s 7200 RPM hard drive
  • 1 GB ATI Radeon HD 4650 [DVI, HDMI, VGA]
  • Tuner TV, ATSC-NTSC with PVR, remote

  I think that the USB adapter is your best choice. Just pay attention to the resolutions available for whichever you choose.

  See you soon,.

• HP Pavilion Elite HPE-80 t PC: Pavilion location battery

  I have a six years, HP Pavilion Elite HPE-180 t PC and I get battery indivator messages so I guess I need to replace the battery. Anyone know where he is?

  Thank you.

  Hello

  Your machine uses Truckee-UL8E motherboard:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01976263

  You can find RTC battery at the bottom of the image. It is round, just above a part orange.

  http://support.HP.com/us-en/document/c01901210

  Kind regards.

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• Better graphics for HP Pavilion Elite HPE-570f card

  I have the Pavilion Elite HPE-570f (BV542AA) Windows 7 ultimate with 16 GB of ram upgraded and an upgrade

  HARD drive with 7200 RPM. The P/S is a 460w and ATI Radeon HD 6770 with only 1Gig vram. I would like to upgrade the video card up without compermizing the P/S.

  Does anyone have any ideas.

  Thanx.

  Hello

  The NVIDIA GTX 550TI would be a nice bump in performance.

  The NVIDIA GTX 550 TI compared to the Radeon 6770.

• Upgrading the PSU and GPU for my HP Pavilion Elite HPE-510 t

  Operaring system: Windows 7 64-bit

  CPU: Core i5-2500, 3.3 GHz

  Memory: 10 GB

  Video graphics card: GeForce GT 420 - OEM

  Hard drive: 1 TB

  Computer case: height: 38 cm (14.96 inches), width: 17 cm (6.69 inches), length: 41 cm (16,14 inches)

  Power supply: power supply 300W

  Several features of the product: HP Pavilion Elite HPE-510 t

  due to the diablo 3. I updated graphic setting the lowest. FPS is between 15-22 so I'm interested in upgrading my power supply HP Pavilion Elite HPE - 510 t(specs are above) and graphics card with the following, respectively:

  GPU: ASUS GeForce GTX 560 (Fermi) 1 GB 256-bit GDDR5

  GPU size: 9 "x 4.4"

  Power supply: Antec High Current Gamer HCG-750 750W Series

  "Power supply Dimensions: 7.1"x 5.9"x 3.4"

  I wonder if these prodcuts will enter the computer, as is or if I should look for other products.

  Thank you

  The ASUS GTX 560 should adapt and work very well. The Antec PSU is great and very likely to have problems in the space provided. It can interfere with connections to the motherboard and push against the CD/DVD discs. Please look at the Corsair CX600 instead. It is only slightly larger than the block of power SUPPLY HP stock and is known to adapt.

  Frank

• question about HP Pavilion Elite HPE-501f

  I wanted to buy one handed to nine HP Pavilion Elite HPE-501f but I noticed it was only sold in the Canada. I'll still be able to use it in the United States

  Hello

  Yes, you will still be able to use the PC in the United States.  You might want to consider the warranty terms and conditions that apply to reconditioned PCs.

• Pavilion Elite HPE 450 t PC: desktop computer will not be updated for windows 7 64, Microsoft tried without success.

  I have a PC Pavilion Elite HPE 450 t, and a few months ago he ceased to accept automatic updates from Microsoft downloads.

  I tried to use the tools that Microsoft has nothing helped.

  Some time after, my Norton Security software security suite failed and wouldn't charge.  Norton failed to find a solution.  I guess it must do something with the heavy backlog of unloaded updates.

  ? Is it possible to load windows 10 on win 7?

  I got my PC tested for viruses, root kits and it is clean, but updates are still not loading.

  Honestly, I'd appreciate any help that you folk can provide.  Thanks in advance

  Leon R.

  Hi there @LROSZKOW,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have had problems with the updates of Windows and want to know if you can upgrade to Windows 10. I'm happy to help you with this.

  Reading the questions you have described in your current system that you cannot upgrade to Windows 10, using the normal method of free upgrade. Your system should have the option available from a previous update of Windows, as the free update is delivered via Windows update. If you have a Windows 7 or 8.1 product key, then you could do a clean install of Windows 10 and use this key to activate your Windows 10 free documents. Of course, you want to first make a backup of your data.

  Another option would be to try to load the original image from the desktop computer, and then try to update again by using Windows Update. This assumes you have a working recovery partition or recovery media. Computers HP - performing a recovery of system HP (Windows 7)  But to protect your data, you want to make a first backup as I mentioned.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion Elite HPE - 575 a desktop PC set up latest patch Windows 7 from Tuesday

  Hello

  My HP Pavilion Elite HPE - 575 a Desktop PC running Windows 7, 64 bit will not configure the last patch Tuesday, August 14, 2012 Windows. The computer seems if running all the updates correctly when stopping however the next time that you start it only configures approximately 30% before failing and then close to return to the previous state.

  Something has changed in the microsoft update that resolved itself after several days without doing me anything.