Pavilion Elite HPE-570f: update Bios

Similar Questions

• Better graphics for HP Pavilion Elite HPE-570f card

  I have the Pavilion Elite HPE-570f (BV542AA) Windows 7 ultimate with 16 GB of ram upgraded and an upgrade

  HARD drive with 7200 RPM. The P/S is a 460w and ATI Radeon HD 6770 with only 1Gig vram. I would like to upgrade the video card up without compermizing the P/S.

  Does anyone have any ideas.

  Thanx.

  Hello

  The NVIDIA GTX 550TI would be a nice bump in performance.

  The NVIDIA GTX 550 TI compared to the Radeon 6770.

• Hp pavilion elite hpe-570f system recovery question

  I'm having all sorts of problems trying to do a reinstall my hp pavilion elite hpe-570f system. I'm trying to use the recovery partition. I can get to options and don't start the process, no problem. He has even reformat the hard drive. The problem arises when relocation of the factory software. Usually, it hangs at 1% until the screen loses the signal and that's it. I have disconnecged everything - including the usb keyboard and mouse on the last attempt - but the most I ever got was 35% before the screen loses the signal and nothing else happens. I thought that if I left him alone, he would install completely, but this last time I left for almost 4 days and still not install. Advice?

  Given that it was me that pisses off the coast, I purchased a retail version of windows 7 unlimited and tried. The same problem. Bought a new motherboard - and the case since the case of HP is designed to put another issue - and he moved very well. Have not had any problems of video card. It seems therefore that the cause of this whole ordeal was the motherboard.

• Pavilion Elite HPE-570f RAID 0?

  I just bought a Pavilion Elite HPE-570f.  Blazing fast CPU and graphics, but I/O does not.  At only a single HD 5400.  I want to install two discs and set RAID 0.  This motherboard will it take?  Thank you

  WannJL wrote: I just bought a Pavilion Elite HPE-570f.  Blazing fast CPU and graphics, but I/O does not.  At only a single HD 5400.  I want to install two discs and set RAID 0.  This motherboard will it take?  Thank you

  Hello WannJL, according to the specifications of your system, that can be found here, Raid0 as well as Raid1 are supported.

  It shows the 7200 RPM and 5400 RPM drives.

  If you want even more performance, you might consider the Western Digital VelociRaptor series discs, (10 000 rpm), or as Big_Dave claim, one of the SSDS.

• HP Pavilion Elite HPE-210f: update video card

  A PNY gtx 950 should physically be in a HP Pavilion Elite HPE-210f? I already know that I have to upgrade the power supply, but before shelling out more money, I figured I would see if anyone knew if the card fits?

  KKingotu, welcome to the forum.

  The problem you will have with the GTX 950 is, it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on February 5, 2010.  There is no way to update the UEFI BIOS.  You can contact Technical Support PNY to see if they have a VBIOS update for the video card that will work with your motherboard.

  Meanwhile in the space provided, you can measure e/s rear plate on the front of the computer case to see if any of the components.  In addition, it is a wide double card (two locations).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?

  Hello support, I wanted to disable startup secure for my office.
  I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
  I am on window 10 64-bit UEFI.
  I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!

  I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
  Help me please.

  Thanks for the additional information.

  Here is my diagnosis/notice:

  I don't think you'll be able to get the GTX 960 to work with this system.

  Why it won't work in the UEFI/GPT:

  It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.

  Why it won't work in legacy/MBR:

  It won't work in legacy because it's a single card of UEFI.

  My suggestion:

  Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.

  Some other things to consider:

  You PSU has enough power for this card? I think it takes a minimum of 400W PSU.

  You connect the auxiliary power connector?

  Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]

• HP Pavilion Elite HPE-372f: MS-7613 (Iona-GL8E and GTX 970 bios update

  Hi, my system is supplied with the card mother MS-7613 (Iona-GL8E! I'm trying to see if there is an update available to the BIOS before updating my video card for GTX 970.  I already upgraded my power to 600 W for the 970. My current version of BIOS [according to Windows system] is American Megatrends Inc. 6.07 date 19/05/2010. Please help me find where I can get an update of the bios for my motherboard.

  Here is more information on my system:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-300-desktop-PC-series/4162190/model/427545...

  Right now I'm really confused!

  After reading the return of Best Buy Canada policy [which gives me 14 days to return my purchased GPU]. I decided to go against the advice I got from this thread and another HP forum.

  I bought the Zotac GTX 970 at Best Buy, thinking it could be a very small chance that it will work, and if it does not work I have he's coming back!

  To my surprise after installing it, it started no problem! I installed the latest drivers from the website of Zotac and then rebooted the system, but still no problems!

  I ran all the points of reference 3-DMark, more than twice with no problems! [which is about 7 times faster than my ATI hd5770]

  Here are my results: http://www.3dmark.com/3dm/6457066

  I played a few minutes with the deity: sin of origin with ultra graphics to 80 FPS and still no problem!

  I also played a few minutes with supreme commander2 [game 2010 year] at 60 FPS and still no problem!

  I close on my computer about ten times, just to make sure that the system is stable and still no problems!

  Here are two pictures of my information system showing that I run the version of the BIOS HP 6 and the GTX 970!

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 447 & authkey =! HfU-APzSFQeV0Il & v = 3 & ithint = 2cjpg % photo

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 446 & authkey =! AGmYzz92v2tiaNw & v = 3 & ithint = 2cjpg % photo

  I only used it for two days and I hope I won't run into problems in the future!

  So my advice is to check your store for their return policy and try again the GTX 970 yourself! Don't let not the other experiences of volunteers/users HP form this discourage you from trying it!

  PS Don't forget to upgrade your block of POWER 500 W. [I mine improved 460-w 600 W Corsair]

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• Update the bios HP Pavilion Elite HPE - 480t CTO Desktop PC

  I just bought a hard drive 3 TB to my HP Pavilion Elite HPE - 480t CTO and he only sees a drive 746,52 GB under Windows 7 pro 64 bit. My main drive is a 1.5 to and he sees very well. where can I find an update of the BIOS using the new drive? I have been to the page "downloads of software and the driver" and it does not list one. Am I out of luck?

  When I ran Paragon booted from a USB stick to copy my 1.5 TB drive it given the disk as a disk of 2.7 to so I think the bios is seening it?

  EDIT: The Intel rapid storage technology software sees as 2 862 TB, but windows doesn't see 746,52 GB.

  Thank you

  Curtis

  Solved!

  Update card mother sata drivers and program "Fast storage Intel technology" and it now works fine.

  Went to ma-configdotcom and ran their detection app and it recommended JMB36X_WinDrv_R1.17.65_WHQL_eSATA.zip of JMicron and Intel's SetupRST.exe. I ran both, restarted the computer and viola! He works and see all the new drive.  I hope this helps someone else.

• Pavilion Elite HPE 450 t PC: desktop computer will not be updated for windows 7 64, Microsoft tried without success.

  I have a PC Pavilion Elite HPE 450 t, and a few months ago he ceased to accept automatic updates from Microsoft downloads.

  I tried to use the tools that Microsoft has nothing helped.

  Some time after, my Norton Security software security suite failed and wouldn't charge.  Norton failed to find a solution.  I guess it must do something with the heavy backlog of unloaded updates.

  ? Is it possible to load windows 10 on win 7?

  I got my PC tested for viruses, root kits and it is clean, but updates are still not loading.

  Honestly, I'd appreciate any help that you folk can provide.  Thanks in advance

  Leon R.

  Hi there @LROSZKOW,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have had problems with the updates of Windows and want to know if you can upgrade to Windows 10. I'm happy to help you with this.

  Reading the questions you have described in your current system that you cannot upgrade to Windows 10, using the normal method of free upgrade. Your system should have the option available from a previous update of Windows, as the free update is delivered via Windows update. If you have a Windows 7 or 8.1 product key, then you could do a clean install of Windows 10 and use this key to activate your Windows 10 free documents. Of course, you want to first make a backup of your data.

  Another option would be to try to load the original image from the desktop computer, and then try to update again by using Windows Update. This assumes you have a working recovery partition or recovery media. Computers HP - performing a recovery of system HP (Windows 7)  But to protect your data, you want to make a first backup as I mentioned.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• Help with updates for HP MediaSmart Suite & DVD/BD discs for PC HP Pavilion Elite HPE-112y

  HP Pavilion Elite HPE-112y PC

  VT637AA-ABA

  Genuine Windows 7 Home Premium - 64-bit

  Blu - ray player

  HP MediaSmart Software Suite

  I bought my computer new from Best Buy in 2010.

  HP MediaSmart Version: 3.1.0.1

  HP TouchSmart DVD Version: 4.1.2.5122

  HP TouchSmart Music Version: 4.1.1.4604

  HP MediaSmart Photo Version: 4.1.2.4327

  HP MediaSmart video Version: 4.1.2.4322

  HULU Desktop: Host Version: 0.9.14.1 - SWF Version: 0.9.15.33

  HP MediaSmart/TouchSmart Netflix Version: 1.0.2.0

  I have apalogize, I know that this has been done before, but I'm looking for different software or updates not upgrades.

  A couple of weeks, I tried to watch a movie Blu - ray (made before 2013) through HP MediaSmart DVD, when I put the movie in him would ask if I wanted to check the updates, so I said yes, he started the process of loading and asked again if I wanted to check the updates. Finally, I took the film and went into settings, watched in updates and there was an update. So I chose the update and HP MediaSmart DVD HP TouchSmart DVD changed. After that, the movie played fine.
  
  Now I'm watching a Blu - ray movie (made in 2013) and still once he asks me if I want to check the updates, so I took the film out, went into settings, that update, but there is nothing there. I put the movie back to try again and he asks me if I want to check the updates, so I push No., he would say "disk ready for play. Press Play to start. "So I press start and it will immediately message asking if I want to check the updates. So then the movie is still in I go into the settings, that update, and there is still nothing.

  All DVD for the 2013 game and rain fines. All comics before 2013 play fine. All BDs for 2013 keep asking check updates.

  Now, I find another reason that could not work the BDs is because my DVD/BD players could be updated.

  Device: hp BD O DH4O3S SCSI CdRom Device & hp DVD a DH16AAL SCSI CdRom Device
  Driver provider: Microsoft
  Driver date: 21/06/2006
  Driver version: 6.1.7601.17514
  Digital signer: Microsoft Windows
  
  I clicked on the update for both driver and said that I was aware.

  I find no new updates for HP TouchSmart DVD on CyberLink website. Where can I check updates? In addition, what I have to update all of the HP MediaSmart Software Suite to make it work (and where I do that)? Are there updates for DVD/BD drives and if there is where can I find them?

  Someone, please help me to find the updates.

  Sorry it took so long to get back to that.

  I finally got a new monitor (a long while ago):

  HP Pavilion 22bw IPS monitor 21.5 backlit "

  1920 x 1080

  VGA, DVI - D, HDMI

  So I tried again a movie BD 2013 on the HP MediaSmart/TouchSmart DVD thanks to the new screen and he asked again if I want to check for an update, but it worked fine on PowerDVD from CyberLink 13 (which means I have to buy ). So I have not watched all BD movies on my computer for awhile.

  I recently bought a new computer and restored my old computer to its factory condition and reinstalled all programs and installed the updates I could find.

  After I restored the computer I tried BD 2013 & 2015 on HP MediaSmart/TouchSmart DVD movies and he even asked if I want to check for an update. It's been 2 years and still no new updates! Looks like HP MediaSmart has become obsolete. I don't know if PowerDVD 13 still works because I obviously don't buy it.

  Thus, it seems that if someone wants to play movies BD 2013 or newer that they should ensure that they have the right connection between the monitor and the computer and buy a new BD software to replace the old software obsolete.

  With my new computer, I'll be closing this and boxing upward. So I don't need to worry about this more.

  Thank you for your time and your help. And good luck to anyone else who might have the same problem.

• HP Pavilion Elite HPE-575 has: the graphics card upgrade

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  @W1976, welcome to the forum.

  W1976 wrote:
  

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  No, the GTX 950 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to update the motherboard in the UEFI.  Latest video cards do not for UEFI were the GTX 660/670.  I suggest that you choose a manufacturer and contact their Technical Support to help them choose the best card for your system.

  You will also need to upgrade the power supply (PSU).  It is only 300W.  Most newer cards require at least 400W to work properly.  Although status map specifications at least 300 w, members reported that they had at least to 400W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion Elite HPE 547c: upgrade graphics card for HP Elite

  I tried to replace/upgrade to update my graphics card for my desktop PC. I tried several video cards, but with each one, once it is installed and the computer turned on, the image does not register with the monitor. Everything else seems to work, but the monitor gives no answer. It was only a problem once the original video card has been removed. The current video card, I am trying to install is the NVIDIA GEFORCE GT 730.

  In the course of the years, I added a memory and the power supply has been upgraded, but all the rest are always original parts (http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/5035344/model/5074426/do...

  Is this a problem with the other parties, who will need to be replaced or is there something else I forget?

  Thank you.

  Hello

  You're dominant, in your case, the most important factor-BIOS compatibility... more recent maps, like the gt730, require the UEFI BIOS to run... you have a LEGACY BIOS system, and cannot do anything, unless you change your motherboard... your pc is a model of early 2011... UEFI standard HP in their systems of end of 2012...

  You can watch other maps, if... the 700 series card youre looking at is a maxwell model 2014... There are in this region that come with a feature of hybrid bios which offers wider compatibility on legacy systems... or you can look at maps more old pascal/fermi architecture that work exclusively on legacy BIOS systems...

  Hope this helps

  This answer solve your message or question?

  If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.