Pavilion Elite HPE: Power on password
I powered up the computer after 4 years of non-use and do not know what the power u [password is? I can reset the motherboard some how? Help, please. I can't find a connecting cable
You are the very welcome.
In order to clear the BIOS P/W, please refer to the link below, last position on the page...
Tags: HP Desktops
Similar Questions
-
HP pavilion elite hpe-035sc: power supply wattage
Hello
I have a hp pavilion elite hpe-035sc
Product number: VS311AA
I7 870 2.9/8 GB ram/500 GB
power supply: 460w delta electronics dps-460 DB A (it has a connector 6 power pins)
I recently added an asus gtx 550 ti and it worked
I'm worried about the power supply, do you not think that it is enough
checked the power supply and I found:
max power: 460w
power combined 12va + 12vb + 12vc equal to 385 W (it does average?)
THX
It should not be any problems with the installation at all. Just do yourself the favor of not not overclocking the card.
Delta POWER supply has enough good specs for a mainstream card like the one you have installed.
-
HP Pavilion Elite HPE-130me: upgrade of power
Hello
I need to improve my diet with plu wat 460w currently in my HP Pavilion Elite HPE-130me nvidia gtx 260 NVIDIA 980 graphics card upgrade
Please advice which food to buy?
Thank you
Hello
Try the Corsair CX500, CX600 or CS550m as they are the same dimensions are the power supply in your PC. The CS550m would be my choice.
Know what the return policy is before you buy anything.
Consult this publication of the article.
-
Power for desktop Pavilion Elite HPE 550f.
I want to know if the power supply for the Pavilion Elite HPE 550f active or passive PFC. the specs online say: 460 watts, PFC power adapter. I was not able to find whether it is active or passive.
Thank you!
Hello
He is ACTIVE. Delta made power supply HP 460 watt (Bordeaux). DPS 460 DB3 - A
This article will give you an explanation of the difference between assets and liabilities.
-
HP Pavilion Elite HPE-410F replacement power supply
I want to put a better graphics in my PC, so I can update my video card, but I can't figure out how to get out the existing supply! The whole thing seems to be riveted with the exception of the one side panel to access inside. I could go down the top panel and front as well, but I can't go down any other sides in order to free food after that I have to unscrew. Someone had a bit of luck with this?
Here are the specifications of your desktop HP Pavilion Elite HPE-410f. Here's HP provided the instructions step by step for "replacing the power supply" in your computer.
Please click the White Star of KUDOS to show your appreciation
-
How to add to my HP Pavilion Elite HPE-590uk Usb 3.0
Hi does anyone know if I can improve my HP Pavilion Elite HPE-590uk for usb 3.0 and if so could you recommend a product that I could buy to do this. Thanks in advance.
One of them check it:
http://www.overclockers.co.UK/showproduct.php?ProdID=CC-003-AK
This is to use a pci-e x 1 card. You have 2 these slots available. This will show you how do:
http://h10032.www1.HP.com/CTG/manual/c02255267.PDF
See the section on the replacement of a card.
Instead of plugging on the long black slot which is a video card plug into one of the slots black short. You have Windows 7 I think which means that you will need a driver, but that should come on a CD with the card. Will need you a power connector (molex) on the map, too.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
HP Pavilion Elite HPE-500f desktop PC
HP Pavilion Elite HPE-500f desktop PC - I would like to upgrade food, video card and hard drive. Can I use a SATA III hard drive? Can I use a 4 Gig ATI video card? Those are the weak links in this computer in the measurement of performance, Windows 5.1 index. The ram has already been updated to 16G. I would use a hard drive WD Black edition.
Thank you!
Jon A. Schoen
You can use a SATA-III HDD but the 785G chipset only supports SATA-II. You won't see any difference, and the SATA-III is backward compatible. You have a 300W power supply. You can put in a better and with a minimum 500 or 600 watt PSU, you can install any videocard, pcie 16 x which will be in good physical shape. In retail offices, there is simply not as much space as in a custom build Tower and best video cards these days are huge things two locations. Don't forget, it fits with room to spare, or you will have problems of air circulation.
-
HP Pavilion Elite HPE-495uk for: HP Pavilion Elite HPE-495uk
HP Pavilion Elite HPE-495uk Desktop Hi there I have the computer following and need to update my graphics card and want something with 2 GB what cards will fit in my system and have I not enough power to power a new 2 GB card? Any help would be great. Soon TV
Hi there @Tele,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have any questions about the upgrade. I'll be happy to help you.The Notebooks of PC HP Pavilion Elite HPE-495uk Desktop, this computer has a slot PCI Express 1 x 16 for the graphics card and a 460 W power.
Please keep me informed of the progress of things.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!Thank you.
-
HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?
Hello support, I wanted to disable startup secure for my office.
I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
I am on window 10 64-bit UEFI.
I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
Help me please.Thanks for the additional information.
Here is my diagnosis/notice:
I don't think you'll be able to get the GTX 960 to work with this system.
Why it won't work in the UEFI/GPT:
It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.
Why it won't work in legacy/MBR:
It won't work in legacy because it's a single card of UEFI.
My suggestion:
Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.
Some other things to consider:
You PSU has enough power for this card? I think it takes a minimum of 400W PSU.
You connect the auxiliary power connector?
Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]
-
HP Pavilion Elite HPE-575 has: the graphics card upgrade
Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated
@W1976, welcome to the forum.
W1976 wrote:
Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated
No, the GTX 950 requires UEFI in the motherboard instead of a standard BIOS. HP didn't start using UEFI until mid-October 2012. There is no way to update the motherboard in the UEFI. Latest video cards do not for UEFI were the GTX 660/670. I suggest that you choose a manufacturer and contact their Technical Support to help them choose the best card for your system.
You will also need to upgrade the power supply (PSU). It is only 300W. Most newer cards require at least 400W to work properly. Although status map specifications at least 300 w, members reported that they had at least to 400W.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
HP Pavilion Elite HPE-035sc: msi iona 1.0 ms-7613 can handle a gtx 750ti?
Hi I have a
HP Pavilion Elite HPE-035sc desktop PC i7 870 2.9 ghz 8 GB ram
Serial number: [personal information]
Product number: VS311AABIOS: american megatrends Inc. 5.13, 03/03/2010
BIOS mode: legacy
OEM power 460w
I would like to know if the motherboard can support the gpu or not
Please answer as soon as possible
Thank you < 3
Greetings,
750ti GTX requires BIOS version 8.xx.
This card to initialize not due to lack of UEFI support in the BIOS.
Discover the Nvidia 600 series graphics cards as they will run on a legacy PC BIOS. The 600 series cards can run on a PCIex16 Gen1 slot. I have not checked this.
I've seen information indicating that some AMD manufacturers ship AMD cards with the ability to switch between legacy and UEFI BIOS.
Check out it at Sapphire Tech.
So these four cards do not work when it is combined with adequate food on a legacy BIOS PC with a PCIE x 16 Gen2 slot.
The PC can have only one slot PCIex16 Gen1. The cards are not compatible in this case.
You will need to check the prospective: graphics card power and the dimensions of upgrade to check both will fit your turn. We must also find a graphics card that runs on a slot PCIex16 Gen1.
See you soon!
-
HP Pavilion Elite HPE-210f: update video card
A PNY gtx 950 should physically be in a HP Pavilion Elite HPE-210f? I already know that I have to upgrade the power supply, but before shelling out more money, I figured I would see if anyone knew if the card fits?
KKingotu, welcome to the forum.
The problem you will have with the GTX 950 is, it requires UEFI in the motherboard instead of a standard BIOS. HP didn't start using UEFI until mid-October 2012. Your computer was released on February 5, 2010. There is no way to update the UEFI BIOS. You can contact Technical Support PNY to see if they have a VBIOS update for the video card that will work with your motherboard.
Meanwhile in the space provided, you can measure e/s rear plate on the front of the computer case to see if any of the components. In addition, it is a wide double card (two locations).
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS
Hello
Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".
It only allows me to enter the BIOS and it meets no other entry.
I thought it might be the motherboard.
Is anyone know about this problem? Is it already happened?
My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.
I knew no more probably is not on warranty.
Thank you.
Hello
Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.
It is of the card mother reference web page.
Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.
While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.
Best regards
ERICO
-
HP Pavilion Elite HPE-372f: MS-7613 (Iona-GL8E and GTX 970 bios update
Hi, my system is supplied with the card mother MS-7613 (Iona-GL8E! I'm trying to see if there is an update available to the BIOS before updating my video card for GTX 970. I already upgraded my power to 600 W for the 970. My current version of BIOS [according to Windows system] is American Megatrends Inc. 6.07 date 19/05/2010. Please help me find where I can get an update of the bios for my motherboard.
Here is more information on my system:
Right now I'm really confused!
After reading the return of Best Buy Canada policy [which gives me 14 days to return my purchased GPU]. I decided to go against the advice I got from this thread and another HP forum.
I bought the Zotac GTX 970 at Best Buy, thinking it could be a very small chance that it will work, and if it does not work I have he's coming back!
To my surprise after installing it, it started no problem! I installed the latest drivers from the website of Zotac and then rebooted the system, but still no problems!
I ran all the points of reference 3-DMark, more than twice with no problems! [which is about 7 times faster than my ATI hd5770]
Here are my results: http://www.3dmark.com/3dm/6457066
I played a few minutes with the deity: sin of origin with ultra graphics to 80 FPS and still no problem!
I also played a few minutes with supreme commander2 [game 2010 year] at 60 FPS and still no problem!
I close on my computer about ten times, just to make sure that the system is stable and still no problems!
Here are two pictures of my information system showing that I run the version of the BIOS HP 6 and the GTX 970!
I only used it for two days and I hope I won't run into problems in the future!
So my advice is to check your store for their return policy and try again the GTX 970 yourself! Don't let not the other experiences of volunteers/users HP form this discourage you from trying it!
PS Don't forget to upgrade your block of POWER 500 W. [I mine improved 460-w 600 W Corsair]
-
I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.
The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update
That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".
I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...
without success.
Any other suggestions of what I could do to fix this?
Hello
Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.
If your PC support has been changed or modified then put it back in its original state.
Maybe you are looking for
-
How to remove the photo album.
Hello world I am using 1.0.1 Photos and I would like to know how to delete an album. Can I delete photos without any problems, but I would be you want to remove the albums that I is no longer necessary. Your help would be appreciated. Thank you. PA
-
Unable to connect to Skype account.
Original title: SKYPE I have problems logging back on my Skype account. I did a backup and recovery with no luck. Everyone HELPS
-
firmware is damaged on befsr41 ver 4.3
Tried to upgrade the BEFSR41 firmware and it did not. Now I can not access the router at all. Fttp.exe I tried without success. It says "cannot find server". My router is a paper weight now? Windows 7 64-bit. How can I fix the firmware if I can't ac
-
Repair or fix this error code UNRAC.dll - 6
When I started the installation of max Payne 3 he stopped at 0.7%, showing the error of UNRWA. DLL error return code 6. Plebase help me
-
BlackBerry Smartphones using a headset 2.5 mm on the 9700?
Howdy - someone ' one knows where to find an adapter that correctly converts a helmet with a plug of 2.5 mm to make it work with the female input jack 3.5 mm on the 9700? I notice that my helmet has two black stripes on it, and the supplied headphone