Pavilion g4: administrator password does not work bangoura and and the deactivation of the system 85109974
Please help me soon
Hello
You can use the link below to generate the BIOS password reset key. Enter the system code stop or the serial number of the device to generate a.
or use the code to reset below
30861370
You can:
1. use the unlock code you generated to enter BIOS
2 disable all passwords that are enabled in the Security menu of BIOS.
3. If the request for current password - enter the unlock code
4. for the new password, simply press the ENTER key
5. repeat the same thing to check the password column.
Tags: Notebooks
Similar Questions
-
Somehow my diary of the administrator password does not work, no disc reset
original title: locked out! Help, please
Somehow my diary of the administrator password does not work. I tried everyting. I use Windows Vista.
I continue to be asked to provide a 'A' floppy to recover my password, but there is no floppy drive on my computer. I have not configured a retreival diskette.
I am not able to access all the programs that I installed as an administrator through the comments log in.
I tried to re - install the complete operating system after no longer being able to access my programs and I am not allowed to do it either.
I'm at my wit's end! Can someone please?
Thank you
Completely lost in cyber space.
Hello AdrianaMonti,
I'm sorry but the Microsoft forum rules do not help users circumvent passwords of Windows OS or software systems.
I do not understand why you have problems with re-setup because it has nothing to do with your original administrator password. Your copy of Windows came pre-installed on your PC or did you buy a boxed copy and install it yourself?
If you are unable to re - install probably you get error messages. What these error messages?
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
My admin account password is not working. Help, please! Running windows vista Home premium. HELP ANYONE?
Hello
1. Since when you are facing this problem?
2. don't you make changes on the computer before the show?
3 isn't the account you are able to access an administrator account?Method 1:
If it is an administrator account, you can remove the password for the account and check:Method 2:
You can create the once connected to Windows password reset disk.Links:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-risks-of-resetting-a-password
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-diskhttp://Windows.Microsoft.com/en-us/Windows-Vista/reset-your-Windows-password
Method 3:
You can check the link given about lost or forgotten passwordsFor more information about password problems, see:
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-passwordThe Windows password problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-password-problemsSee also
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126 -
My Windows 7 Administrator password does not work
My password worked before and I know the password. But it doesn't work anymore. I was told to remove the connection administrator to display icon making it inactive. Now, I can't login with the administrator account or the second user as an administrator. The imagined two message incorrect password. The two passwords are correct.
I was not able to save the password initially as he needs to be to save to a floppy disk and I don't have a floppy drive. He could not save on cd or USB, so I never had a copy of it. I have the system repair disk, but I don't want to lose my programs.
Your help is appreciated.
Hard to say, but if you normally use an account to admin-level during your daily use, this means that you might have contracted a virus simply by visiting a site with an infected server. When you solve it, make sure that you only use your admin account if you really need to take as administratively reconfigure your network. In the course of normal daily use, use a non administrator account so that nothing can cause the admin account get accessible.
-
Failed to get on as an administrator on new Wwindows & Ultimate
Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
3 people know the password and none of us were able to get. What can be done to reset the password or to get the password to be accepted? We have no install disc.
1. make sure that shift caps lock is turned off.
2. try a different keyboard.If that doesn't help, clear the password with NTpasswd.
Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.
http://home.eunet.no/pnordahl/ntpasswd/ MS - MVP - Elephant Boy computers - don't panic!
-
Why my administrator password does not work?
Whenever I try to remove or install a program, I received the message that I don't have administrator rights, then I have the password and then get an "access denied" message on my C: drive? What is going on? I am the administrator, too!
Hello
- Have you logged as administrator?
- You did any recent changes?
- What is the exact error message you get?
I suggest to start the computer in safe mode and check if the same question:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeIt will be useful.
-
administrative password does not work cant get in Control Panel changes
need help called microsoft want 99 to reset
Go to your desktop and press Windows + X logo and choose command line (admin)
Copy-paste this command
NET user administrator / Active: Yes
try to redo the change
-
Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?
Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?
If you have a Vista DVD, please use this tutorial from Microsoft Support:
http://support.Microsoft.com/kb/940765/en-usHere's another same tutorial, but from another source;
How to regain access to your administrator account tutorial link For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
My password does not work. I get the message user profile service has no logon. Help please.
Hello
You can try the following.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select Safe mode and press ENTER. If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore. Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration. When you are finished, Windows will restart as normal in order to check if you can now connect correctly.
Another option if the above does not help is as follows.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select "Start using last good known Configuration" and press ENTER.
Kind regards
DP - K
-
original title: the computers of network/administrator password
The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?
Hello
Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky -
Administrator Bios password does not work on HP 4420 s XT940UT #ABA Windows 7 64-bit
Someone please help me with this!
I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem. I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits I suppose initially that he came with? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become big fan of most HP, Dell and Lenovo. I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better. Thank you for reading this and I hope someone can help.
Model: HP Probook 4420 s
Type: XT940UT #ABA
Operating system: Windows 7 Ultimate
BIOS version: 68AHHH Ver.F.20
SM BIOS Version: 2.6
Hardware Extraction layer: Version 6.1.7601.17514
Once you open a session with the service the customer of HP one case of pension, they will provide once the utility you and steps to execute it. who can capture the UUID. BTW - UUID is a unique ID for each machine (16 digits or more) stored in the BIOS itself.
Once the results of the utility (UUID and other info) in the log file, shared with HP, they can generate a key file (SMC) to reset.
Well, depertment of technical support can help you in it, no need to ask for anyone in particular or the Department.
It will be useful.
-
my password does not work, but I could connect before
my password does not work but I could connect once before, when I tried to create a password reset disk i cant.im using the account invited now and don't have any other administrator account with the paswords working or I know.
Hello
It is available on you microsoft information help on problems with passwords
http://support.Microsoft.com/kb/940765
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
________________________________________________________
except that we cannot help you
read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:
-
Administrator password does not not under Vista
I have a new desktop computer with Vista and have worked on getting it set up. I've set up user accounts, but my password of the administrator account does not work. I tried all the options and checked the capslock and even tried a few misspellings, even if I don't have a problem the first 4 or 5 times I had used it. is there anyway to reset it without having to reinstall Windows since I don't have a password reset disk?
You did not account for additional user with administrative privileges? If this isn't the case, you will need to use a program like NTpasswd empty password for your account, so you can connect.
Download the bootable CD .iso image file, burning with burning software, third party (as an image, not in the form of data), starting with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.
http://home.eunet.no/~pnordahl/ntpasswd/
Once you're back in the system, here are my suggestions for how to configure user accounts in Vista:
You absolutely don't want to have only one user account. In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
MS - MVP - Elephant Boy computers - don't panic! -
How can I get my password fixed, it won't let me connect you update my flash drive?
This password is presented by your operating system and is designed to prevent you from accidentally installing the software.
If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt. If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.
If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.
If you are still puzzled, you may need to reset the password on your Mac:
http://support.Apple.com/kb/PH18653
Maybe you are looking for
-
Windows move to the main screen when sleeping Satellite-S50T-B
Satellite S50T-B, Windows 8.1. Whenever my laptop sleeps, it moves all the icons and windows open on the secondary external monitor on the laptop monitor. Like a lover double screen, it's extremely annoying. I keep having to set up my work space. I e
-
Update BIOS on the Satellite L50 - has PSKK8V
I have _Satellite L50 - A PSKK8V_ with Win8.1 and BIOS version 1.7I saw that there is a new version of the bios (1.9) and downloaded... but when I try to install it it says '* Current BIOS does not support this version program. "Please use the other
-
How can I remove goodgame empire pop up in Safari?
Hi guys,. How can I remove the empire goodgame jump upward in Safari? Thank you
-
igfxext module has stopped working
What is c... "igfxext module stopped working?do I need to fix?If so, how?
-
My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge. Printer works fine in USB mode on old Windows 2000 office. Netwo