Pavilion g4: can not hear the sound of my laptop

I can't hear from the laptop. When I try to test the sound he says not to test tone. I think I got g4, but I know it's the Pavilion g series

Hello

Try the following.

Download IDT Audio Installer on the link below and save it in your downloads folder.

http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59154.exe

One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

When you are finished, download and reinstall the Chipset driver at the following link.

http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52791.exe

Once the relocation of Chipset is complete, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Can not hear the sound

    Downloaded a course to start and can not hear the sound when you view the course on the browser. Help me.

    Hello

    May I know who you have been faced with the question is specific to any browser or it occurs on all browsers? If it only occurs in Internet Explorer, then you can try to follow the steps below and see if it works-

    1. Go to tools > Internet in Internet Explorer options.
    2. Click the Advanced tab.
    3. In settings, scroll down to the multimedia section and please make sure that the below highlighted option must be selected.

    Once you checked the options above, then try to view the course on IE and check if it works.

    Kind regards

    Ajit

  • IDT installed, can not hear the sound being transmitted

    I tried to fix the audio for a few days now, I got the IDT High Definition CODEC after awhile, but I can't hear the sound being released now.

    It would be great if someone, perhaps a professional give me sent assistance because looking around on the internet has proven that anyone had a similar problem that has not been resolved by a simple reinstallation of the driver, thank you.

    Product name: HP ENVY 15 Notebook PC

    Product number: A7H00UAR #ABC

    8.1 pro 64-bit of Windows

    (This all happened after a thermal cut-out)

    May be stupid, but a solution to my problem. A full stop after you have reinstalled the driver seemed to fix my problem (after the installation of the driver is restarted too) thanks HP Forums for all the help on the recovery of my audio well.

  • Can not hear the sound of the UFO PROJECT PART6

    Hello, I am one of those who learn After Effect by your training material on the Adobe Web site.

    How to add video special effects | Tutorials Adobe after effects CC

    I don't hear the sound of the PROJECT PART6 UFO. WHAT SHOULD I DO?

    The speaker and the thin volume.

    See the PROJECT UFO PART6.

    (WHY ONLY ME?)

    Should I make the video from the beginning? (My laptop is too slow).

    10 WINDOW

    AFTER THE EFFECT CC 2015

    I think so.

    I've tried the shortcut key 0 [zero] and [delete] to the ram preview.

    But it did not work. OTL

    Make sure that you enable audio switch for the layer

  • Can not hear the sound after installing Windows 7

    Original title: Audio problem

    I'm not able to hear any sound from my computer. I have integrated speakers it was working perfectly before, but after I installed windows 7 if I play any audio file I can see the game but I hear no sound what should I do

    Vista clean install of XP?

    Anyway, you will need to install W7 audio drivers specific for your audio device. Download on the part of the Web site of the manufacturer of your PC/laptop, Web site of the manufacturer of the motherboard if you made the yourseof PC, or, if you have one, the sound card manufacturer's Web site.

    See you soon,.

    Jerry

  • Can not hear the sound from the speakers

    I bought a new PC with WIndows 7 32 - bit OS, I have connected my PC to a Samsung LED TV. The problem is that I can hear audio thro headphones but not in my LED speakers?

    How to connect the computer to the tv, HDMI or VGA?  If you did with VGA, then you will need to connect an audio cable in the computer and television.

  • USB turntable set-up - can not hear the sound for the disabled application

    I BOUGHT AN ION PROFILE PRO PLATINUM-DRIVE TO PLAY MY LP BY DESK TOP. THEY HAVE SOFTWARE TO RECORD LP AND I PUT IN PLACE ALL THE NECESSARY PARAMETERS AND PROGRAM WORKS FINE AND I CAN HEAR MUSIC BY DESK TOP, ONCE I'M OUT OF PROGRAM AND I TRY TO PLAY AN LP ON PLATINUM I GET NO SOUND THROUGH MY OFFICE UPSTAIRS. I AM SETTING SOUNDS UPWARD. I DON'T LIKE ON THE RECORDING OF THE LP, I JUST WANT TO LISTEN TO THEM ACROSS THE TOP OF OFFICE; MARIOTAPCO

    Hi Mario,.

    1. What is the brand and the USB turntable?

    Check if the usb turntable is compatible with Windows 7, here is the link to check the compatibility of the hardware and software with Windows 7.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    The USB turntable requires the software to play music. I suggest you to contact the manufacturer of the hub on the issue.

  • Installed the driver for Lifechat lx300, but can not hear the audio in media player

    I have a new helmet. I installed the driver but can not hear the audio in media player

    Hello

    I suggest you to visit the links below that would solve your problem.

    Step 1: Turn sounds into the lifestyle cat helmet

    http://support.Microsoft.com/kb/935749

    Additional information: a. tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    b. no sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Hope this information is helpful and let me know if you need additional assistance.

  • BlackBerry Smartphones can not hear the other end to the phone

    Hello

    I have a Bold 9900. Lately, I had a problem where I am unable to hear the ringing of the. The phone vibrates and I see an incoming call. When I answer the call, I can not hear the person at the other end of the line, or the other person can hear me. If I try someone sounds, I can't hear their phone ring, but I get the message that we are related, but may not have any conversation. When I do a full power off and restart its new normal.

    How can I get rid of this problem?

    Hello docvish,

    Welcome to the community,

    As the PC or laptop requires the restart of our smartphone require also restarts to remove slow, whenever you feel any unusual just give a battery pull reboot I have; e while the unit is on the battery wait a min. then reinsert it wait until it restarts. You can also give a soft reboot by pressing alt + Shift R (aA ^) + DELETE.

    Also avoid any applications running in the background, press on and hold Menu button for a few seconds, it will appear a screen showing running applications or that are still open., remember always to get out of the applications not only to return the key. Try if solves your problem, or alternatively you can visit any Center of Blackberry service to the issue.

    Good luck

    Click 'Like' If you want to thank someone.
    If problem resolves mark message (s) as a 'Solution', so that others can use.

  • Example: Pavilion 550qe: have just got a QED Pavilion and can not find the place where the monitor.

    Have just got a 550qe of Pavilion and can not find the place where the monitor.   The image on the book they sent shows the exact card, I need but can't find anywhere on the back of the PC.    There are a few plates little who have the drivers there, but do not want to start removing the panels unless this is where some of the connections are hidden.

    Hello

    Can't find the official specs of HP. But since the following specifications

    |-Intel-Core-i7-|-Windows-10-|-Silver.product.100241370.html http://www.Costco.com/HP-Pavilion-550qe-desktop-

    There

    Ports:

    • 2 x USB 3.0
    • 2 x USB 2.0
    • 1 x HDMI
    • 1 x VGA
    • 1 x jack Headphone-out/microphone-in the drop-down list
    • Multi format card reader

    Depending on your monitor, you can use HDMI or VGA to connect. What is your monitor (make and model)?

    Kind regards.

  • I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

    Radeon hd5450

    I just put a graphics card and I can not all the sounds of my hdmi on the back of the Badr

    Hi Edrey Davila,

    1. what operating system is installed on the computer?
    2. are you sound the computer?

    If you connect your computer to the TV using a HDMI cable, try the steps from the following link:

    Connect your computer to a TV
    http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

    HDTV: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  • I can not all the sounds from my computer

    I can not all the sounds from my computer. I hae tried to click place volume icon in the taskbar, but it won't let me and she also come with 'there is no active mixer device. To install mixer devices, go to control panel, click Printers and other hardware, and then click hardware, but it's not it will fade. Please can someone help me.

    The sndvol32.exe file is possibly corrupt.

    To replace, there are two methods:

    (1) open the Windows Explorer > tools > Options > view > make sure that show hidden files and folders is NOT checked. Access the c:\windows\system32\dllcache and locate sndvol32.exe > copy it into the following folder c:\windows\system32, overwrite the existing file. > Re-boot, you should now have access to your sound mixer and be able to place the icon on the taskbar. If for any reason any you do not find the dllcache folder:

    (2) put your XP CD in a driver, don't let it start. Then: Start > run > type in msconfig > enter or OK > extract a file > 1st enter in sndvol32.exe > in the second point of the box to your CD player > 3rd enter in c:\windows\system32 > extract file > run over if necessary, close everything and restart.

    If the above does not work, re - install you 'audio drivers, although I would only do it as a last ditch measure.

    See you soon,.

    Jerry

  • I can not all the sounds of my Asus A 6000 after installing Windows 7.

    * Original title: sound on asus has 6000

    can someone help me?  I can not all the sounds of my Asus A 6000 after installation of windows 7.

    where can I find the right drivers?

    Thanks John

    There is no native driver Windows 7, but you can download the latest driver available to install in compatibility mode.

    http://www.ASUS.com/support/download/3/41/0/6/17/

    To learn more:

    You can find more information on compatibility modes in the articles below:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

    also check:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Speakers problem - I can't hear the sound if I got my earplugs on

    When I watch a movie, I can't hear the sound if I got my earplugs on. When I remove them, I don't hear anything. How can I fix?


    Title: original speakers

    Hello

    1. What is the number of brand and model of the computer?

    2 is this problem specific to the film? You sound on the computer speakers?

    3. did you of recent changes on the computer before this problem?

    Method 1

    Open the Audio playback troubleshooting utility-

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

     

    Method 2

    This occurs when you have the headphones, by default. We must define a default speakers.

    (a) exercise the functions mentioned below to set the speakers as default:

    (b) go to Start and click on Panel.

    (c) click Sound, and then a new window will open.

    (d) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

    (e) now check if speakers are listed and then right-click on it and choose activate.

    (f) point out that speakers and click on "as default'.»»

    Method 3

    Check with the volume settings and if it helps:

    (a) right click on the speaker icon in the taskbar, then select volume control options.
    (b) check on 'all devices evolving sound.
    (c) make sure that you have "disabled the default communication device".
    (d) place a check on the speakers and headphones.

    I suggest you to see link and check.

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    It will be useful.

  • social voice for 64-bit Windows 7 chat can not hear the other person in Windows Live Messenger.

    Hi I am running windows 7 ultimate 64-bit and every time I try to chat with friends on the mic, I can not hear them, but they can hear me, all other sounds on my pc are working properly and not voice chat, ive got all my drivers updated and no idea how to solve this problem, thanks

    Hi snake1121,

     
    It seems that there is a problem with the settings of Windows live messenger.
    We recommend you to ask a question to Windows Live Messenger Forums for assistance.
    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for