Pavilion g6 1202-TX: driver problems after update to 8.1 Windows

Similar Questions

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• HP Envy M6 64 bit problems after update to 8.1 windows

  Last night I updated to windows 8.1 8 and have had problems since. I have a 64 bit HP ENVY #C2L94UA # ABL m6 after update, I tried to play Devil may Cry game that worked perfectly under 8.0 and then he comes to start charging the computer turned off. I did research online and exhaustion possibilities why including the abolition of the xbox drivers and reinstall the game but nothing doesn't always turns off the computer. I then opened AMD vision, to try to adjust the settings, I noticed I was now just as 3 options of things to settle. I could just adjust power consumption on the processor dependimng on if the computer was plugged in or not. Went a whole optiuon to adjust graphix and all the things to do it graphically disappeared. Then I redownloaded the catalyst drivers and tried to reinstal. Once the computer off again. Every time I have try and update the graphics it stops. Site Web HP says that all my drivers are up to date. Then, I rebooted the computer by pressing ESC and tried to do a system refresh. He failed. All the options of wiping my computer clean and refreshing failed. I said that it lacked a partion for one of them. Even system restore will not work. It shows my Ati video card in device manager. Please help me ty

  OK I solved my problems that I did start the computer in safe mode and then I uninstalled my cards video from Device Manager. I then restarted the computer and installed the version of catalyst that was said to work with 8.1 and switchable graphics cards. I have restsrted and have more no video issues at all.

• HP Pavilion g6 2202TX problems after update to 8.1 windows

  Hello

  Background:

  Recently, I updated my windows 8 operating system windows 8.1 (64-bit)

  2202TX assists in integrated Intel HD graphics 4000 & AMD Radeon 7670 M card (1 Gb)

  Problem:

  I noticed that my amd graphic card does not provide operating system. coz

  • in the dxdiag box I could see intel HD 4000
  • When I right click anywhere on the desktop and try to run the graphic properties, I got error that:
    "Catalyst Control Center cannot be started. Currently, there are some parameters that can be configured using Catalyst Control Center. »

  So I checked assistant HP support for an updated driver, there is not. I had also installed all windows updates.

  So I contacted HP and I have been asked to manually download drivers that are for version 8.1 of windows 2202TX.

  Then, I installed it;

  There, after I was due to problems.

  1. in the graphic section, first of all I installed driver Intel graphics high definition (HD) (sp63753), in the process, that I got following error:

  "This computer does not meet the minimum requirements for installing the software.
  which is very strange because 2202TX meets the requirement set out in req system mentioned in the driver page.

  2. then, I installed the graphics driver AMD high definition (HD) (sp59936), which has been installed successfully. but after restarting my laptop, after awhile I got following error:

  "Catalyst Control Center: the host application has stopped working."

  and I get the same error when I right click on the screen area and click graphics properties.

  3. then when I installed Qualcomm Atheros QCA9000 series Wireless LAN Driver for Microsoft Windows (sp64255), I got following error:

  "802.11 a/b/g/n wireless adapter device not found:
  The device may not be present or could have been ejected/disconnected from the system.
  abandonment of the installation, please insert the card and try Setup again"

  So I run the Device Manager, and the driver for the network card "Ralink RT3290 802.11 bgn Wi - Fi adapter ' proved to work correctly.  and also the rest of them in that tree.

  In addition,

  4. "HP support assistant has stopped working" error if I try to open the same.

  5. when it is run: dxdiag, I am following error:

  "DxDiag has detected that there could be problem accessing Direct3D the last time this program was used.             You want to bypass Direct3D this time? »

  Yes: I have not tried that!

  No.: programs stopped working and closes.

  6. when I right click any where on the desktop there is no user interface for Intel HD 4000 option, now it disappeared after the installation of the AMD graphics driver, where can I get the intel HD 4000 UI application?

  Things I'm still trying:

   

  Should I install this driver from amd's official website:

  Check driver tool AMD Mobility Radeon™

  http://support.AMD.com/en-us/download/mobile?OS=Windows%208.1%20-%2064

  &

  This

  AMD Catalyst™ 13.11 Beta Driver for Windows

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  In short:

  problems with the graphics drivers and Catalyst Control Center

  Problems with HP support assistant

  Problems with atheros drivers qualcomm...

  Please help me to resolve these issues.

  Hey NiksDroid,

  At this point the steps above should have solved the problem. Before installing the following drivers, please make a backup of your system, files and images. That way if something happens to the computer you won't lose any of your items.

  Thank you very much for the information and images. My suggestion would be to first update your Chipset drivers.
  Driver and Intel Chipset Installation utility
  Intel Management Engine Interface (MEI) driver
  After installation, restart your computer.

  Then the next step would be to update the graphics drivers. Make sure that you first install the Intel driver and restart your computer before you install the AMD driver.
  High definition (HD) of Intel Graphics Driver
  AMD graphics driver high definition (HD)
  Please restart your computer once more, after completing the installation of AMD.

  Please let me know the results of the update, thanks.

• Prirnting problem after update to 8.1 Windows

  Hi all

  I am a single user on my laptop using a HP Laserjet 1018. Just updated to 8.1 and seem to have problems similar to many others. Printer worked fine on Windows 8, but not now.  A ran printing HP and doctor Scan and the printer worked fine. I then removed the cable to the USB port on laptop, she and tried to print again. Nothing. Turning the printer off it back and tried again. Nothing. Removed from the printer, added again and new trial system. Nothing. Downloaded the latest driver from HP site and tried again. Nothing. I also made sure that the print spooler and the Notifications and Extensions are running. Still no joy. I find it hard to believe that such a widespread problem has not been examined by Microsoft, HP, or both. I guess it's possible that some printers are no longer supported under 8.1, but would love to be told if this is the case. However, it seems that many users cannot use their printers and I was just wondering when this issue will be resolved by the person who is responsible. If anyone can enlighten me, I would be very grateful.

  Thank you very much

  Bobbler

  Hello @Bobbler,

  I thank very you much for the detailed response. I'm sorry to hear that your situation has become worse after trying some of the steps I have provided you and a few extra steps of your choice.

  One thing I want to clear up is because the printers Laserjet 1018, 1020 and 1022 are all in the same series, to continue the research I found that the installer is labelled 1020. The package install itself is labeled: LJ1018_1020_1022_Full_Solution.exe . So, to finally try to remove the Laserjet 1020 that appeared in the list programs and features, you might then see the two installed copies of the Laserjet 1018 on your system. It is strange that after removing one of the entries, both seem to remove it from your computer.

  I have to start by ensuring that the Laserjet 1018 is completely removed from your computer. I think at this moment that we need to focus on getting a clean slate to work.

  Uninstall the drivers:

  Please unplug your USB cable

  1. I would like to you launch by clicking on the following link: Microsoft: the problems that programs cannot be installed or uninstalled and running the tool by selecting the "Run Now" option on the right side.
  2. This Microsoft tool will run on your computer and remove all selected software and drivers who fail to uninstall in the traditional way.
  3. Let the tool to run and when you are prompted to select Uninstall
  4. A list of programs is now complete, do scroll down and look for anything related to the Laserjet 1018, 1020 or 1022. Delete them if they appear.
  5. When the tool has finished, you can open your start screen, and type "Notepad".
  6. Click the notebook to start the program
  7. When Notepad opens, just go to 'file' and select 'Print' and take a look in the print dialog box to ensure that a Laserjet 1018, 1020, 1022 or does not appear. If they don't show, simply close the window.

  Sometimes on Windows 7, Windows 8 and Windows 8.1 printers may not appear correctly in the file devices and printers. An easy way to see if there are duplicates of your product installed is by opening Notepad and simply check the print dialog window to see if they appear in there. If everything looks fine, so there aren't any duplicates installed.

  Solve printing problems:

  1. Then I'll have you click on the following link: Microsoft: solve printer problems
  2. Once the site opens, select 'step 2' on the left side and then click on the "Printing Troubleshooter" link in the middle of the page.
  3. This tool from Microsoft will find and solve different problems on a computer that could potentially cause printing problems. It will also identify and resolve the various problems of the registry on the computer.
  4. When the tool has finished, then we are ready to install the printer.

  Install the printer:

  Note: Leave disconnected USB until prompted

  1. Please select the following link to download new drivers for your printer: HP LaserJet Full Feature Software and Driver
  2. Click Download at the top left and just start the download
  3. Once the download is complete, simply follow the instructions on the screen to reinstall your product
  4. Connect the USB cable only when prompted
  5. Once the installation is complete, try to print!

  Note: The installation should appear with an 'install' option and not a new camera 'Add' or 'repair' option. Should 'add new device' or 'repair' appear it indicates that there are still drivers and software HP hides somewhere on your computer.

  Please let me know if the tools that I have provided and reinstall it solved your problem. Fingers crossed!

• acing hard drive problem after upgrade to 8.1 windows

  Mr President I upgraded my hp envy j048tx to windows 8.1 and have updated all my drivers using HP support assiastant... so when I apply a right click on any file... its takes time to open the contextual menu... long u please you suggest?

  Hi Vira_Bathwar, welcome to the Forums of HP. The right-click menu is also known as the "context Menu". This can accumulate and get cluttered over time, causing it to be slower. The other possibility is system performance issues. I found a similar thread with a few suggestions that have worked for other people know this symtom. See this thread Microsoft: do a right-click context menu in desktop appearing slow victory 8.1

• Driver problem after moving from Vista to Windows XP

  Hello

  Can anyone advise on where to find the drivers?

  I have a laptop Inspiron 640 m.  It has been upgraded to Vista (which I absolutely hated) by Dell, so I took it upon myself to reinstall Windows XP.  Needless to say I now have terrible problems with drivers.

  I get the 'Assistant new hardware detected' for the following drivers;

  -Ethernet controller

  -network controller

  -video controller (vga compatiable)

  -sm bus controller

  I can't what to install on the Dell site.

  I downloaded the something which was means to have drivers for Inspiron 640 m, but it failed, so I thought I'd do a separate download... but I had no joy.

  Anyone got any ideas?

  Your desperatley seeking help and advice... : smileysad:

  Mel

  
  

• HD T410s graphic problem after update

  A few days ago, I decided to update my 2011 T410s by Lenovo
  Toolbox. I was looking for solutions to improve the battery life. I have
  has chosen to update all 'important' and some option updates
  those I thought that could have an impact on the battery life (BIOS update, Intel HD graphics driver, thinkpad power management driver and a few others)

  Since I have lived a graphic break several times when I watch videos online such as
  thedailyshow.com or youtube.com. The first time a
  a message on the graphics driver (or something like that)
  has stopped working and has been restored but the next second the
  ventilation was repeated, monitor would go black and the
  graphics would begin slowly reappear, I'd still get a message
  on the graphics driver and the other second monitor would again
  black and so on... Now, I only get the message more difficult when it happens from the computer retrieves before leaving black. The only way to break the cycle is to restart
  the computer and everything works fine. Until I have watch another video. ! I tried uninstalling the driver HD and reinstalled (both reinstalled as Lenovo and Intel), and it still does not work.

  Suggestions? Is someone else had problems after updating?

  Please uninstall the display driver, and reinstall.

  Also, install the latest player adobe flash.

  Please watch the video file online and then check it in.

  Best regards

  Tanuj

• Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used it without a problem after update 2015 cc adobe photoshop

  Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used without any problem after update 2015 cc adobe photoshop...

  Just installed 9.4 ACR it works for my RAW files. Camera Raw 9.4 now available

  And the following cc 2015 windows updates installed.

  Updates Windows Photoshop CC 2015
  File download	Size	Date	Notes
  Update Adobe Photoshop CC 2015.1.2 (64-bit)	352 MB	20/01/2016	16.1.2 release
  Update Adobe Photoshop CC 2015.1.1 (64-bit)	352 MB	14/12/2015	16.1.1 release
  Adobe Photoshop CC 2015.1 update (64-bit)	352 MB	30/11/2015	16.1 release
  Update Adobe Photoshop CC 2015.0.1 (64-bit)	258 MB	03/08/2015	16.0.1 release

  

• [X 230] Problem after update audio driver

  Last night, I used Lenovo think Vantage to install driver and software updates.  One of them was the Audio Realtek 6.0.1.6710 driver.  After a reboot, I get the following message.  Cannot start the application Dolby and I have no sound.

  How can I fix it?

  Thank you!

  

  UPDATE: I was able to go into the Device Manager in Windows and restore the driver Realtek 6.0.1.6617and all is well now.

  Apparently the Dolby application requires a particular version of the Realtek driver and you are unable to update one without updating to the other, but think that Vantage tools does not list the updates of the application of Dolby for my machine.  Ehh...

• Pavilion laptop g6 - Wifi problem after upgrade to 8.1 Windows

  KIM

  I have a Pavilion Notebook - C3M29EA #AB7 g6 and upgraded to 8.1 windows yesterday.

  Since then, I was unable to detect my own wifi connection while I am able to detect my neighbours. (Everything worked fine before the update).

  Any suggestions?

  -Same here.

  After an hour of time I will ever come back that I solved the problem.

  (1) go on the internet via the wired LAN port

  2) update drivers for Ralink wifi adapter

  Go: Right click on the wireless network connection icon: properties/Configure/tab Driverr/update driver

  (3) after a minute or two of updateing the PC reports that the driver has been updated

  (4) pull the network cable and turn on WiFi.

  What a pain in the anus,

  Anyway, as I said, corrected!

  Dansda.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• HP Probook T3L12UT #ABA G3 450: Audio driver issues after update of Windows 10 anniversary

  After upgrading the operating system Windows (10.0.14393), Conexant driver failed. No device installed. Also in the Device Manager, Intel High Definition Audio is missing a driver. Cannot find a copy (grouped with another driver... video perhaps).

  In any case, fixed the problem of driver Conexant by completely uninstall Conexant Audio ISST and re-install.

  Now, my only problem is that the audio does not turn off to a HD TV plugged into the HDMI port. Video is fine, but no sound. HDMI does not show well in Audio devices.

  Any ideas? HDMI port connected to the Intel High Definition Audio device?

  The device for the device ID Intel HD Audio are:

  INTELAUDIO\FUNC_01 & VEN_8086 & DEV_2809 & SUBSYS_80860101 & REV_1000
  INTELAUDIO\FUNC_01, VEN_8086 & DEV_2809 & SUBSYS_80860101

  Thank you

  Ed ski

  Hello:

  Yes, the Intel HD audio device that needs the Intel graphics driver reinstalled.

  I propose this option to install the driver, because sometimes simply reinstall the graphics driver Intel does not work.

  Download and install this free utility for files.  The file 2nd on the list is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, download and save, but do not run this driver Intel graphics from the support page of your laptop.

  This package provides the Intel video drivers, control panel and display audio driver for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75984.exe

  After you download the file of the graphics driver, right-click on it and select 7 - zip from the list.

  Have 7-Zip extract of: and leave it to decompress the file in the file name (sp75984).

  When this is done, go to Device Manager and click on the Intel HDMI audio device problem requiring the driver.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC, and you should be able to get audio and video from the HDMI connection.

• Pavilion 15-n211dx: Hp Pavilion 15-n211dx hard drive problems

  Hello

  Last March, I bought a Hp Pavilion n211dx-15 and 9 months after I bought it, I had some problems with the RAM because of my eletricity, but I already bought a new pair of ram sticks. I tried to do the system recovery Image minimized by myself because I didn't know it was a problem of ram, in the middle of the installation, the computer froze and the pixels have been going nuts. In any case, when I had the fixed ram, I started the computer and I saw that I had altogether 90 GB of HARD disk space (it comes with a 750 GB HARD drive), the windows installation is fine and all, but my HDD shows that 90GB total and the computer comes with a 750 GB HARD drive , I do not have what to do (if I have to install stuff and HARD drive drivers).

  Thank you

  xXmasterXx

  MAN! I thought about it! I clicked on extend the volume and then chose the unallocated space to send C:\\ thank you!

• PROBLEMS AFTER UPDATE DOWNLOAD

  I downloaded the microsoft updates and after the closing down and restart computer download I received a message that says: updates not configured correctly coming changes
  Do not stop your computer.

  then it restarts continuously and again with the same error message and I am not able to enter the computer, etc.

  PLS HELP

  [Correction to Vista]

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And read this info about the update settings:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner