Pavilion g6-2002au: USB driver update failed

I did a periodic update of the system on the laptop drivers.  The last time, I remember it was almost 2 years ago.  And this time I encountered problems.

This topic follows my request on this thread about SafeMode start/restore after a driver update failed:

http://h30434.www3.HP.com/T5/notebook-boot-and-lockup/booting-safe-mode-on-HP-G6-2002au/m-p/5690028/...

And as I said it I begam making one an update to pinpoint what caused the original problem with the bulk update.  After 7 by an updated driver, I found the (or, at least) a cause of the problem.  The following image, 2 PCI to USB host drivers caused an error message from windows after the update.

There are 6 USB drivers linked to this very old/aged list and clear terms the number of items of equipment installed on the laptop.  See this screen shot of the Device Manager list:

Drivers USB 6 update, I have taken these 2 items to be updated first because 1) they seemed to be the oldest (replacements were dated in 2010), and 2) if I understand technology, these bits connect the processor to host chip and the actual hub bus.

I chose just these 2 PCI-drivers for update (unchecked the selection for all other boxes in the recall list) and proceeded.  When the installation has ended a windows message box reported an error of windows to one of the devices (one, not declared or referenced by a number).  Considering that the originals had worked for years without apparent problems, I started a process of restoration.  It worked, and restored 'very old' pilots work again without any error boxes, while the most recent have not.

This is a screenshot of the restored Details of driver (work), which seem to be the original objects from Microsoft for XP3. Vista and windows 7

Any ideas why this (the driver update failure) happens?

Davidk10

@Davidk10

There is no update from HP, the prograns you are using is not supported by HP.

Tags: Notebooks

Similar Questions

  • HP Pavilion x 360 Convertible: the Intel HD graphics driver update fails to install

    Hello

    I got my new laptop for Christmas and a few days ago, HP support assistant told me that there was a Version "Intel high definition (HD) Graphics Driver Update": 10.18.15.4281Ep3. I downloaded the updated, but after that 4 attempts trying to install via HP support assistant I kept getting the same message "installation failed." Then, I went to my downloads through Explorer of files and found the downloaded file. When I click on the file it takes me to the Setup Wizard and I can start the installation, but about 2/3 of the way if the installation I get the same message "the process cannot access the file because it is being used by another process" and then the installation completes without completing. I'm not sure how to find out which process is using the file or how to do the complete installation so I would really appreciate your help.

    Thank you very much, Rich

    Hello

    Follow the steps below to uninstall the driver:

    1. Press the Windows key + R
    2. Type devmgmt.msc
    3. Press Ok
    4. Right-click on the graphics card and select Uninstall
    5. Restart the computer

    After the computer restarts, run the Windows Update and the last update will be installed.

  • Pavilion DV6700: Windows 7 windows update fails to repair

    New EVO SSD 840 with the new windows 7 x 32, which replaces the old HARD disk drive and Vista.

    Everything works well and connects every time from the boot, but windows update continues to work forever.

    I used the fix from Microsoft windows update, but get this error every time, attached.

    I have a normal home via the WiFi connection turned off and tried to use the cable connection and always the same.

    Other computers to fine day.

    Without VPN, no proxy.

    I really don't know what to think at the moment, any advice will be appreciated.

    Thank you.

    Hi @thunderbird345,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6700 Notebook and Windows Update code error 0x8024402C. Thanks a lot for the display of the error message and of other details, very very useful. Here is a linkwhich published Microsoft to fix Windows Update error code 0x8024402C.

    Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

    It is recommended to disable all Antivirus software, while trying to make the updates.

    You can also skip the update if you have the software update that is already installed on your laptop.

    Here is a linkto the HP Support Assistant if you need. Simply download and run the program on your laptop and it will help with software updates and driver on your system.

    Please let me know how it goes.

    Thank you.

  • the sp35174 graphics driver update fails to install and SP37534.exe fails in response resignations:

    Graphic updates failed, two of the three listed.

    SP35174 fails States: error in NVCPL. Entry DLL missing NvCplRestorePersistence - gives same error separated 4 messages.

    SP37534 hangs and will not end after 2 hours of waiting, only the green progress indicator keeps the movement from left to right.  Manager tasks indicates that it does not.

    Pavilion m7750n

    Vista operating system

    NVIDIA GeForce 6150LE graphics
    Computer seems to work OK

    Someone at - it suggestions on how to correct these errors of installation of driver update?

    SP35174 and SP37534 are your graphics drivers and you just install one of them. SP37534 is the most recent of the two, but I would try to install the driver nVidia GeForce 301.42 directly from nVidia. This driver is the latest driver for your 6150LE. I would like to uninstall any nVidia graphics driver currently installed before 301.42 also consider installing the driver nVidia nForce 15,49 chipset, which will good update number other drivers on your computer.

  • HP Pavilion 15 laptop: amd driver update after that upgrade from win 10 leads to the boot failure.

    I have a HP Pavilion 15 laptop.

    After I my windows 8.1 upgarded to win 10 and decided to update my graphics driver amd, after the installation of update to the course to restart commissioning hangs at the hp logo (sometimes to start startup repair, then fails).

    This only happens on this specific driver update... do not update this driver translates by "display driver stopped working / crashed and now has recovered" message.

    is this a problem with the update of the driver or I can't use this update in win 10?

    Hey @AnjaneyaAnand,

    Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

    For starters I would say that the HP Support Assistant running.

    Here are some useful links for the HP Support Troubleshooting Wizard or by downloading the latest version:

    HP Support Assistant

    HP computers - using HP Support Assistant (Windows 10, 8, 7)
    With the help of HP Support Assistant (Windows 7, Windows Vista)
    HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)
    HP PC - troubleshooting HP Support Assistant (Windows 7)

    I highly recommend to run the Windows Update tool that it can find and update all the old drivers or missing you need.

    Please hold me.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon,.

    TechSurge.

  • Pavilion dv7-7121nr usb driver and sm bus controller

    cannot find pavilion dv7-7121nr sm bus controller and the usb driver

    Hello:

    Is no longer a SMBus Controller driver AMD chipset driver file.

    Here's what you need to do to the smbus controller...

    I have zipped and attached below in attachments, the raw smbus controller driver files to decompress and install manually.

    Download and unzip the file.

    Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

    Make sure that the include subfolders is selected and the driver should install.  Then restart.

  • The TOSHIBA for Bluetooth ACPI driver update failed

    Hi all

    I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

    When I tried to download the latest version of the driver it says that I have the latest version of the driver.
    He also says that the device is functioning properly.

    It does not recognize my S4 where before he did.
    I now can not get it to pair because he does not see.

    When I did the last update of MS that I noticed the results put BT update failed, as shown below.

    Any ideas on a fix would be appreciated.

    The TOSHIBA for Bluetooth ACPI driver update
    Installation date: 08/08/2015-09:37
    Installation status: failed
    Error details: Code 80246005
    Update type: recommended

    This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

    More information:
    http://sysdev.Microsoft.com/support/default.aspx

    Help and Support:
    http://support.Microsoft.com/select/?target=hub

    BT is activated using the function keys?

    What is the status of the Bluetooth technology in Device Manager?
    You see errors, some yellow exclamation?

    What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
    No doubt this has problem of BT

  • Pavilion 500-090 USB driver works only with windows 7

    Hi, I lowered my pavilion 500-090 of Windows 8 for Windows 7 and impossible to find a suitable driver for the USB controller. Does anyone know which driver will work?

    Hello:

    Here is the link for the usb driver you need and you can use all other drivers of the model above for your motherboard as well.

    DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197679 & sw_lang =

  • Pavilion 17-g015dx: USB driver

    Need help to find a usb driver for a Pavilion 17-g015dx with windows 7 professional 64-bit os. No usb port works now after installing windows 7 replacement of windows 8.

    Hello:

    This driver should work...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_148026_1

  • HP Pavilion 17-e031sr USB driver for win7

    I have HP pavilion e031sr 17 with Win7 professional laptop. In your site only for Win8 drivers. Please give me a link to download USB driver and video driver (see chart).

    Salvation;

    There is no graphic driver for your laptop to W7.

    You can try the graphics driver for HP Probook 455 G1. It has a slightly different APU if (Radeon 8350).

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D3%257CswItem%253Dob_117771_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    USB 3.0 drivers:

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • The driver update failed

    When I try to update my drivers on hp.com, it says I need to download a file to automatically scan my computer. So I download and nothing happens, it opens, downloads, disappears and it is. I downloaded 5 times and I'm still not able to update my drivers.

    Im sure that I need to update, because my computer crashes randomly. Any suggestions would be helpful, but please make it easy for me to understand. I am not very computer

    Laptop HP G62 - 208CA

    captain_kirk_9,

    The error you received since the start of the test, is that the HARD drive has failed.

    Here is a link to a phone number to call HP and see what repair options, they may have for you.

    Also, here is a link to your service manual that has the part number for your disk and show you how to install a new HARD drive.

    Page 47.

    Your HARD drive is a reference number of 320 (7200 RPM) 599055-001

    Here is a link to the HP parts store

    I would like to know how everything goes.

    Nice day.

  • The graphics driver update failed: 'WindowsUpdate_800705B4""WindowsUpdate_dt000"

    A long download and install driver for Nvidia ended with the message of this failure. What should I do?

    You should not be installing drivers from Windows Update anyway. I don't know why it failed but maybe because it is the wrong driver for your video card. Often, this happens with the drivers available on Windows Update and is one of the reasons we main technicians say do not install the drivers from there.

    Here is some general information about the drivers. Please note the first sentence of the information, which is the most important part.

    The first law of Driver Updates is "if it's not broken, don't fix it". Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.

    Never get the drivers from Windows Update. Bring:

    1. site of the device mftr. ; OR
    2. site of the card mother mftr. If the material is on board; OR
    3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

    Read the installation instructions on the Web site where you get the drivers.

    To find out what hardware is in your computer:

    1. read all documentation that you got when you purchased the computer.
    2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
    3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

    http://www.belarc.com/free_download.html - Belarc Advisor
    http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

  • the DRPS-010 usb driver update

    Hi, I need a driver updated for my digital Boulaye 8 Portable DRPS-010. Can you help me? Thank you!! Pepper

    What is the model number of your camera and what is your
    operating system?

  • iPad: pilot USB MTP / Apple Mobile Device Support Driver update failed - access denied

    Hi all

    I do iTunes/iPad/AMDS rerun (Win7 Ultimate 64 bit). After the last update of iTunes to 11.1, I'm not able to install the Apple Mobile Device Support any longer. Usbaapl64 installation fails. Even a manual update is not possible (access denied).

    Before you uninstall, the iPad has been recognized as Apple Mobile Device Support, but using the old version located in system32. Same result trying to update the driver manually - access denied. After you have uninstalled the ADM the iPad is recognized as Apple iPad to portable devices (in dev mgmt). Updating the driver (and selecting the usbaapl64 in CommonFiles/Apple/Apple Mobile Support folder) still fails - access denied.

    Even to disable UAC, using the account hidden administrator and start Windows in safe mode will not grant access. I have no idea what to do now. Is this a normal behavior or y at - it something very wrong in my system? I don't want to format my system.

    Thanks in advance.

    PS: Windows is up to date
    P.P.S.: Tried numerous solutions of Apple, articles, forums, google, re - install iTunes and what you have. Nothing has worked.

    I have it.

    Have a look in the newspaper of the setupapi.app.log and setupapi.dev.log C:\Windows\inf files I discovered that management installation program / unit was not able to create a temp folder in C:\Windows\System32\DriverStore and was not yet able to copy the files in C:\Windows\System32\DriverStore\FileRepository.

    After you change the access rights (gave me and SYSTEM full access), I was able to update the driver USB MTP driver Apple Mobile Device real Support. Later, I was able to install iTunes without any problems during the installation of the pilot AMDS.

    Took me only 4 days to the indicator with the search in the log files mentioned above-. -.

    See you soon.

  • IDT High-Definition Audio Driver Update Failed

    PC HP Pavilion p6-2378 - Windows 8.1

    Updated recommended audio driver may 12, 2014, and he could not install.

    SoftPaq number: SP66216

    Version: 6.10.6491.0Dp1

    Tried again several times, has failed every time.  Restarted three times - nope.   Checked cables.

    At a loss.  Help, please.

    Hello

    What is the error message? On my machine:

    Kind regards

Maybe you are looking for

  • Folder "Library" hidden in the Finder

    How to display the hidden folder 'library' under Documents/myname in the Finder on Mac?  It is used to be visible, but not anymore.

  • Firefox does not display correctly boxes or text boxes

    Hello, most of the time on many websites as a part of the show lines bounadry textbox or anything. This can be difficult when it shows nothing when I need to move my cursor to start entering text, except that he's looking for unsightly.Also sometimes

  • everything to restore backup?

    My friend just restored from a backup. When she did, everything was back! Even his Facebook and E-mail connection accounts! How is that possible?

  • I can't send mails from my account,

    Icloud, me.com, or gmail (inside the mac.mail) out while I still get them all in. They all show "offline" I tried everything, including insert them again passwprds - who with icloud, isn't possible because inserted automatically and therefore the win

  • best practices for the structure of the code control multiple devices in a sequence-step 2

    I have a question about code architecture and to get multiple devices controlled and synchronized for an experience. It is an 'architecture' - type application, so I hope for some suggestions on how to proceed. I run an experience in which I order 2