Pavilion g6 - 2211st: problems with the installation of the graphics driver

Hello
I need help for my hp product. It is extremely slow after reinstall my Windows 7 64 b! I've looked everywhere for the solution, but without results. In my adapter driver Dispecher Manager Dysplay "Standard VGA Graphic Adapter" has warning icon. It is possible to be there? I can't find a newer driver for it. Please if you have an idea of what to write back. Concerning

Hello:

This driver should work.  Install and reboot the PC.

This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

File name: sp58894.exe

Tags: Notebooks

Similar Questions

  • my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

    computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

    To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
    Help would be much appreciated?

    Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

    Thanks for the effort though...
  • Satellite M30 - problem with the graphics driver and Quicktime movies

    I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

    I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

    Can someone tell me why this might be?

    Hello

    Do you use the graphics driver from the Toshiba driver page?

    Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
    This version uses these features:

    -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
    -Codecs QuickTime [version 7.1.3.100]
    -QuickTime plugin for Internet Explorer
    -QuickTime plugin for Opera/Mozilla/Netscape
    -Extra plugins for QuickTime
    -QuickTime DirectShow parser
    -Wrapper DirectShow QuickTime decoder
    -CoreAVC 0.0.0.4
    -CoreAAC 1.2.0.575

    check it out...

  • Problems with the graphic driver for Elitebook 8460p

    Hello

    I m of the problems with the Elitebook 8460p driver display. The latest version (15.28.20.64.3347), published on 16 June 2014 have some problems on the laptop. When the laptop is running on battery screen suffers from flicker and damaged graphics, as you can see in this video:

    https://www.YouTube.com/watch?v=gQ1w0aOaF7A

    (you can see the flickering between 0:20-0:22)

    I contacted with support local hp and send me a COMPUTER technician, who has changed my motherboard and CPU, but nothing worked. I tried to contact with intel for support (the issue is present with drivers intel non - oem), but they are sending me to the OEM. I would like to have a real driver that works with the system (3347 is a driver of the year), is it possible?

    This isn´t of question at all in linux drivers, more change motherboard I totally ignore a hardware problem.

    I can provide feedback to any solution.

    Thank you!

    Another update:

    Found a solution to this thread (which I started) in the forums of intel:

    https://communities.Intel.com/thread/48327?start=0&TSTART=0

  • Qosmio X 300-problem with the graphics driver

    Greetings,

    My X 300 has worked very well and I am using 186 drivers of Toshiba (Windows 7) and completely by the book. Now, my computer is start planting as much UNLESS I have uninstall the graphics drivers from Toshiba, because then it is stable. Sometimes the driver resets, the computer sometimes go to BSOD immediately (he does eventually in any case). Thus, for the moment, it has no driver installed, but driver VGA standard that comes with Windows 7.

    The question is what do I do? A X 300 without proper graphics drivers is a sports car with pedals.

    Any input would be much appreciated!

    Best regards
    Johan

    PS. the warranty has expired, so no free service.

    Hello

    Have you noticed the same problem on Vista preinstalled Toshiba version?

    At the moment, I can t imagine that the display driver itself is really the problem because pilots are pre-tested by Toshiba and I didn t has seen similar topics here in the forum about display driver not work. Maybe another program is causing this problem

    What you can do is to test the Qosmio X 500 display driver. There is a newer version. You should check this.

    By the way: since when did you notice this problem? I ask this question because a restore of the system to an earlier point could also be helpful

  • I have a problem with the graphics driver.

    Original title: someone help?

    Hello. I have a problem. my laptop says vga graphichs adapter cannot start. I have downloaded the driver and I looked at the Device Manager and there is always problem here.  I clicked the button to update and I chose the folder and it says that the best version of this driver is already installed. But still the same problem... I installed Just cause 2 and it says error directx (code 15) but my video card is compatible with directx10 but I can't open it. My graphics card is nvidia geforce 9300 m and my computer laptop sony vaio vgn-z46gd help me please

    Thierry,

    I would like you uninstall and reinstall the drivers and check.

    We know if that helps.

  • a problem with the graphics driver intel?

    I click on solve problem in windows 7, and it tells me this

    This solution could not be downloaded most likely causes:

    • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

    Install the latest drivers:

    32 bits:
    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19333&lang=eng

    64-bit:
    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19336&lang=eng

    This should fix all the problems.

    I guess, that the action center solution gives you the same advice.

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • "A problem with the display driver.

    Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

    "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    "GPU improvements can be enabled in the Performance preferences panel."

    I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

    • OS: Vista Edition Home Premium
    • Dell Inspiron 1520
    • Display driver: NVIDIA GeForce 8400 M GS

    Sincerely, Danny

    Hello

    Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Photoshop has been giving me the warning:

    Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

    Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

    No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

    Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

  • Photoshop has encountered a problem with the display driver

    I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

    "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

    Can someone help me with this? IT IS URGENT!

    The problem is the driver for your video card, no Photoshop.

    Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

  • HP pavilion n242se 15: problem with the BIOS software

    Hello
    I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
    Please, I want to again software for BIOS for Windows 10 64 bit

    Can you help me?

    SyrianCow

    Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

    They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

    The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

  • HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

    Hi all

    My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

    summer giving a helping hand by making the upgrade.

    Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

    processor, it seemed to be good upgrade to improve the performance of the laptop.

    We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

    ( interview guide , page 108), and the seller assured us he tested the CPU on some different

    HP pavilion and it worked fine.

    But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

    on the front and the setting of the power and volume buttons would light up periodically. The screen was black

    All the time.

    Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

    and it starts fine.

    I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

    same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

    I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

    missed, or the problem elsewhere?

    Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

    on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

    Any help, advice or general guidelines as to what should be done would be really appreciated.

    Thank you for your attention.

    Hello:

    The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

    In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

  • Pavilion 15-e070sl: problem with the key "cancelled."

    Hi guys,.

    I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

    I hope you find a solution

    With the availability!

    Hi @MichaelMazz ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

    If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

    Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

    Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

    I hope this helps.

    Thank you.

  • Satellite L750D-1FD - problems with the display driver

    I got this laptop from my uncle and it was filled with junk and crapwares so I did a clean reinstall and upgrade Windows 7 Home to ultimate. I have a problem with the GPU, windows does not recognize it, or doesn't fly chart AMD.
    Processor is AMD A8 - 3520 M APU, and I think that the GPU is a Radeon HD 6620 G or something before the re-installation. I can't change the resolution, it stuck at 800 x 600, memory shows by n/a, Direct X features are not available, not from the downloaded display driver Toshiba worked.
    Dxdiag appears to the:

    Name: Standard VGA Graphics adapt
    Manufacturer: Advance Micro Devices, Inc.
    Chiptype: AMD ATOMBIOS
    : Type DAC: 8 bit
    Memory Approx.Total: n/a
    Current display mode: 800 x 600 (1 Hz)

    It nothing and can do with this laptop now because the GPU does not work as expected. Please, help me to solve this problem.

    Hello

    I found only Satellite L750D-1FD so I think you have this model. I want to help you on any other way. Here is the correct order of installation for Win7. Please check and install all the available stuff you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

    Win7 SP1
    4.9.2.0 TOSHIBA supervisor password utility
    TOSHIBA HW Setup Utility 4.9.2.0
    TOSHIBA Assist 4.02.02
    TOSHIBA ReelTime 1.7.18
    AMD driver 1.0.0.52 xHC
    8.834.1 - 110420 a-118118C-Toshiba AMD display driver
    TOSHIBA value added package 1.5.10.64
    ATI HDMI Audio Driver 7.11.0.7710
    Conexant Audio Driver 8.51.1.0a
    Wireless LAN driver
    Synaptics Touch Pad Driver 15.2.11.1
    V4.07 Bluetooth Monitor
    Atheros Bluetooth Driver Package v1.0.7 Filter
    Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
    Atheros LAN Driver 1.0.1.50
    Card reader Realtek 1.0.0.14
    TOSHIBA 1.0.4 Wireless LAN indicator
    TOSHIBA Sleep 1.4.2.8 utility
    3.1.8 TOSHIBA face recognition
    TOSHIBA eco Utility 1.3.2.64
    TOSHIBA HDD/SSD Alert 3.1.64.8
    TOSHIBA PC Health Monitor 1.7.7.64
    ConfigFree 8.0.38
    TOSHIBA Web Camera Application V2.0.0.21
    TOSHIBA V4.00.7.01 VCR - HAS
    TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
    TOSHIBA Disc Creator 2.1.0.9 for x 64
    TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 16_wMSI
    TOSHIBA Media Controller 1.0.86.2
    TOSHIBA Media Controller plugin 1.0.6.1

    If you need assistance more let us know.

  • Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

    Vista Home premium

    64 bit

    HP pavilion dv4-1220us

    It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

    RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

    DOWN MY BIOS AND THE ICON IS STILL THERE.

    THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

    Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

    I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

    1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

    2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

    At the moment I'd hide so I does not uninstall my cd/dvd drive.

    Do I need another hard drive?

    Is this something with the Bios?

    Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

    http://www.GearSoftware.com/support/drivers.php

    http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

    http://support.Apple.com/kb/TS2308

    http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

    Hi Mamalasting,

    I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

    Reference:

    http://www.HP.com/#support

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Create local variable programmatically in TestStand

    Can someone please explain the process of creating a local variable by programming?  I searched the forums but have not found what I'm looking for yet. I have an array of unknown size.  I use a foreach loop to go through the table and enter the data

  • Getting to 'mature' LJ to print with laptop

    Hello I had an HP LJ 2100 M for a long time and it works very well through my old office (XP).  The connection to my PC is 32 pin and I was wondering is it possible that I can get it to print from my laptop with Win 8.1 (toll-free if poss) which I us

  • CD and DVD is not recognized

    my pc hp in my computer does not display my CD-ROM/dvd-rom and with my CD and DVD are not recognize... .will help I don't know how it happens but my computer shows no dvd/cd rom section and with which the CD and the DVD does not play on my computer h

  • e-mail address of my printer

    Hi I just bought a printer hp and ive set it up via a laptop, but the thing ive bought is for use with my kindle.when I try to print something from my kindle, it does not recognize the installed printer.ive google cloud and its application to the add

  • Audio dims on the last video clip from Adobe Premiere Pro!

    So my music on my video which was made in first pro cc 2015,3 adobe decreases whenever there is a sound effect. It is very annoying, because this does not happen in the timeline panel. Help me please, if anyone has answers, I went outside with the H.