Similar Questions

• HP Pavilion g6-2235us Notebook PC, long dst error

  Hello

  I work with a HP Pavilion g6-2235us Notebook PC (C2N50UA #ABA), with Windows 8.  I ordered the HP system recovery media and tried to restore the laptop to factory settings.  I get the 3 DVDs and the drive, and then at the helm of the 6% of the final restoration of the blocking of the process step.

  I ran the HP diagnosics and get the following errors:

  Quick check

  INTELLIGENT control: PAST

  DST short: FAILURE

  FAILURE ID: 64MWOW-6G370R-MFPX1F-60XU03

  PRODUCT ID: C2N50UA #ABA

  Hard drive 1

  Thorough check

  INTELLIGENT control: PAST

  Long DST: FAILURE

  FAILURE ID: 64MWOW-6G370R-MFPX1F-61f403

  PRODUCT ID: C2N50UA #ABA

  Hard drive 1

  1. - anyone know what mean these failure codes?  Is my hard drive DOA?

  2. suggestions for recovery?  I think the laptop is about 20 days out of warranty.

  3. If I need to replace the hard drive, how can I find an acceptable substitute?

  Thank you!

  Hello

  Error codes 24 characters for short and long drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with the inability to install the operating system.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 52 of your & Maintenance Guide.

  Kind regards

  DP - K

• p189sa: HP Pavilion Notebook - 15-p189sa Downgrade from Windows 7

  Hello

  I bought this laptop HP Pavilion Notebook - 15-p189sa with little window 8.1 64.

  I didn't know the poor performance and 8.1 window issues.

  Although I tried this OS, I want to downgrade to a reliable operating system and best quality.

  Why change?

  -L' network wifi icon is not working properly, when I change the network disables it in itsalf and it is impossible to solve it it then I have to restart the laptop.

  -L'interface is orrible

  -Sometimes the phone takes hours before turning off or I never turn off

  It is longer so the reasons why I want to change this OS not usable and hostile.

  The downgrade problem is drivers that are not available on the hp Web site.

  Can I use the drivers wind8 for wind7?

  Maybe a program can adapt to drivers for wind7?

  I am not able to develop pilots by myself so what do you suggest?

  Hi Paul,.

  I installed the Realtak you gave me and Bluetooth works properly now.

  Just to let you know that the Synaptics on the repo of hp drivers cause a crash on wind7. I used the drivers on their site here .

  The laptop looks good for today, I'll do some tests of regression during these days.

  Thank you Paul for you support.

  Kind regards

  Sebastiano

• Inoperative"HP Support Assistant" on a HP Pavilion p7-1254 to help de-Windows 7 Home Premium 64-bit

  Product name: HP Pavilion p7-1254

  Operating system: Windows 7 Home Premium 64-bit

  Error message: HPSF.exe has encountered a serious problem and needs colse.  Click 'OK' to outomatically restart this application

  Changes to the system: NO

  When the error occurs?  Is this a feature repeated at startup or at another time?  Updates to the system recently (Windows Update or other updates from HP support)?

  The normal solution for most of the problems with HP Support Assistant is to uninstall the application from the control panel / uninstall a program.  Then download and install the latest version of HP Support Assistant from the HP Web site:

  HP Support Assistant

  Search the topic download HP Support Assistant and select laptops or desktop computers, according to the case.

• cannot log on to windows with the fingerprint reader

  I can't log on to windows with the fingerprint reader after the bios update.

  I've updated to 8.1 windows

  Hello again degyimah,

  I am pleased to have been able to help you get your fingerprint reader works once more. If you can mark my post with an acceptable Solution, it will allow others with the same question to easily find the solution for themselves.

  Thanks again and have a great day!

• HP Pavilion Notebook 15-n055sm: drivers software Windows 10 Pro.

  Hello! When released the software drivers for Windows 10 Pro (64-bit)? I use a HP Pavilion n055sm-15 Notebook PC with Windows 7 Ultimate. Thank you!

  They're here!

• RegCure found 693 errors in my computer at home after a scan, when I log on to Windows

  So that RegCure errors detected during a scan, I have to save, I tried to register, but failed.  An error is when I log on to Windows.  Can you tell me how to get my registry with RegCure number so I can get these corrected mistakes?

  Do you really need RegCure?

  Your computer is operating properly and not to cause any trouble. If you install a registry cleaner, you could be causing more damage and can also make your computer unusable.

  This is my personal opinion and others may disagree about registry cleaners. But the old saying is, if it ain't broke don't fix it. TaurArian [MVP] 2005-2010 - Update Services

• GFWL, I can log on to windows, but not in the game (dirt 2)

  GFWL, I can log on to windows, but not in the game (dirt 2).  It says 0 profiles found on the login screen right after you decide to use an existing LIVE account.  I'm under win xp, game dirt 2 and trying to connect to games for windows live.  my connection works for web browsing, etc.  grid works great multiplayer.  I went through and installed the gamers for windows_live program/client, I connected, created a new account, then restarted the pc.  I tried the two start the game by pressing 'home', which would direct me to registration in a nearly straight line on the door, and then when I hit the ' signine box, he would just sit there saying "Please wait" then that "loading" twirling which is graph would just turn and spin. and on the registration screen indicates "0" profiles found.   why it does not find my profile (recognize)?  Ive also tried going first games for windows live, then the game dirt 2 without result.  can someone please?      Thank you

  Oh, and I was able to download "Tinker" and am now play online!

  also in my games to the information page for windows network live while playing "handyman", it is said:
  I am not registered the internet ip address field and the link system address field says 'not active' and it also says I'm not connected on the field of upnp either.  None of this helps to explain?

  THANKS AGAIN FOR THE TIME SPENT TO HELP ME WITH THIS

  Hi Aceraceraced,

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is linked to the profile in the game of the dirt and would be better suited to the Windows Live games community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Log on to Windows XP Professional password help

  I got a desktop computer and it has 4 accounts log and after contacting the owner before me they know not the log on password or user name, all I get is blue screen and the log on the Windows, even in safe mode, I still get the log on window who want the password and user name I do not have that, someone can help me to go beyond that, I don't have a boot disk, OS is windows xp professional, I looked for help on the web but all the things I've found tells me to click on the start menu, I can't get there, I can not for anything but the blue screen and the log on window wanting the password and user name , Oh, I can get a use F2, F8 and F12

  Try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  In addition, this forum has a policy that requires us to refuse assistance with password "cracking".

  That said, the last resort of reinstalling the operating system is something I would recommend to your situation. Who knows what kind of environment you might encounter if you can open a session? Software of Dodgy or pirated, malware, viruses etc. In addition, your hard drive may be full of useless data, including the possibility of illegal images. Must I say more? I see you say that you have no boot disk (I take it's Windows installation CD), but a repair shop may be able to do the replacement for you. Get a recommendation for a repair shop if you can.

  It is also possible that he has built in installation of recovery/re-uninstall. To learn more about this opportunity, we will need the brand and model of your PC.

  Tricky

• How to disable the log on the windows sound?

  How to disable the log on the windows sound?

  Hello

  To disable startup sound in Windows XP, follow these steps:

  a. click Start, click run, type mmsys.cpl and then click OK.

  b. click the sounds tab.

  c. under program events, click Windows logon.

  d. in the sounds box, click (none)and then click OK.

  See also: change Windows XP sounds

• I just installed on my laptop encryption software; It asks me to log on to Windows XP. I don't remember my windows username.

  I just installed on my laptop encryption software; It asks me to log on to windows.  I don't remember my windows username.  Currently, I am in major trouble since it is the laptop I use for my business.  Whenever I try a different username and password for the encryption software adds logon times.  My current delay is 5 minutes.  Can someone help me?

  * original title - need quick help *.

  Hi Docfun_567,

  ·         Do you have what encryption software installed?

  You may need to contact the software vendor to learn more about it.

  See also:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Pavilion slimline 450 - a24: hp Pavilion slimline is not upgraded to windows 10

  I just got the pc hp pavilion slimline Tuesday. She has windows 8.1. I did all the windows updates yesterday the flag that shows you can upgrade to windows 10 wasn't there. After research, we found that a file called "kb2976978" is the update, you must have windows 10. So we tried to install it and I get the message "this file is not applicable to your pc. So now I don't know how to get windows update 10. The requirements of the upgrade, I have on the pc. Any suggestions please? Thank you, (ps I reserve a copy at a month or there are 10 windows)

  I tried the link but got a page cannot be found? However, I saw an article on Forbes online which has a link that will automatically install windows 10 and you don't have to wait for it to do so in the background. However, thanks for your help.

• Get an HP LaserJet 2100 to work with my HP Pavilion g6-1 b 6, under Windows 7 to make it work.

  I have reliable an old HP LaserJet 2100 which I recently bought a cable to connect to my HP Pavilion g6-1 b 6, under Windows 7 to make it work.  a base HP connection has been established, but I can't find a driver to make it function.  Any suggestions?  HP has no answer except for a Windows referral.0us PC laptop, but I can't find a driver.  I have base HP DeskJet 1000, which performs at the moment, but I prefer the strong impression of the Laser.  I'm a writer and use it only for my text.  I hate to have to buy a new printer when 2100 works on my old desktop (which I recently abandoned).

  Just follow the detailed instructions here--> http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02536257

  When you reach step 6, click on the "Windows Update" button and wait.  When Windows Update is completed (assuming that there is no problem), you'll find entries for the LaserJet 2100, like this:

  

  Choose the PCL 5 or PCL 6 driver.

• Impossible to update DirectX, error: please visit DXError.log and DirectX.log in your windows folder to determine the problem

  Original title: Directx problems

  I have a computer of Windows 8 and im trying to run a game on steam. Whenever I do it says that I need a Directx says update when I try to install it. AN internal system error has occurred please see DXError.log and DirectX.log in your windows folder to determine the problem. I watched up I don't have much sense of him here, it is

  --------------------
  [11/10/14 09:20:27] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [11/10/14 09:20:27] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  --------------------
  [11/10/14 09:22:25] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [11/10/14 09:22:25] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  --------------------
  [11/10/14 09:41:52] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [11/10/14 09:41:52] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  --------------------
  [11/10/14 09:49:16] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [11/10/14 09:49:16] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  --------------------
  [11/10/14 10:04:23] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [11/10/14 10:04:23] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  --------------------
  [28-10-14 19:04:26] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [28-10-14 19:04:26] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  --------------------
  [28-10-14 19:59:23] module: DXWSetup (Mar 30 2011), file: dxwsetup.cpp, line: 229, function: CDXWSetup::InitInstallEngine

  Sections are not initialized.

  --------------------
  [28-10-14 19:59:23] module: DXWSetup (Mar 30 2011), file: psheets.cpp, line: 705, function: PreinstDlgProc

  CDXWSetup::InitInstallEngine() failed.

  Thank you

  Hello Peta,

  Thanks for posting your question on the Microsoft Community forum.

  According to the description, I understand that you are not able to install DirectX and get error message: internal system error has occurred please see DXError.log and DirectX.log in your windows folder to determine the problem

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. You did changes to the computer before this problem?

  2. Since how long you are having this problem?

  3. The game you are trying to launch in the system?

  I suggest you follow the methods and check if it solves the problem.

  Method 1:

  Click on item below and follow the instructions to install DirectX.

  How to install the latest version of DirectX

  https://support.Microsoft.com/kb/179113?WA=wsignin1.0

  If the problem persists, please follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  You can also check out the link below.

  Diagnosing basic problems with DirectX

  http://Windows.Microsoft.com/en-us/Windows-8/diagnosing-basic-problems-with-DirectX

  Please answer back with an update on if it solves your problem.

  Thank you.

• location on the system of audit logs on the windows system

  Hello
  
  What is the location on the System Audit logs on the windows system? I couldn't find any newspaper to < intradoc_dir > / bin directory?
  
  Thank you

  Hello

  IdcServerNT.log is the one that corresponds to audit logs of system that is defined for the AAU.

  Thank you
  Srinath