Pavilion g6-2333el: g6-2333 el Pavilion RAM slot does not

Similar Questions

• Lenovo G560 2nd RAM slot does not recognize.

  Hello.

  I bought 2 new of the straight plug of this computer - 1066 mhz 4 GB of Ram.

  After the installation of the 2 jacks, the computer recognizes only 1 card of 4 GB.

  I have the x 64 bit system.

  Also, I updated the BIOS.

  What can I do to fix this?

  Thanks in advance!

  Hi Tal_Eklkanar,

  Welcome to the community,

  Try restarting the machine with only the ram that is not recognized at the time.

  RAM can be tricky so try to play with different configurations, a place in the first slot and then swap until you see the machine recognizes them both. Sometimes, it just takes a little game.

• HP EliteBook 8740w p/n VB744AV: Base model with only 2 RAM slots does not level up to 8 GB of RAM, 6 GB only?

  So I discovered that my laptop is a version of the basic model of the Elitebook 8740w so I'm missing 2 RAM slots. However, I went to upgrade my RAM from 4 GB to 8 GB the other day, and after ensuring all the RAM was split and firmly fixed my laptop would only flicker the lights indicating that my ports were dirty, RAM was split in correctly or I ordered the bad RAM sticks (which I didn't, I double checked). So I have of the 4 GB split into the slot of the RAM under the keyboard and replace one of the original 2 GB sticks in the other RAM more accessible location at the bottom of the computer. Laptop started fine. I'll try the RAM slot again later tonight when I get home from work, but if anyone has any experience with this issue, I'd love to hear corrections or explanations on what I can do wrong.

  I also want to note that I checked the specifications of the computer and it says that it should support the 8 GB of RAM or more. However I do not know if this is a generalization of the product since it usually comes with 4 vs slots of RAM upgrade only the 2 I have in my laptop.

  Quad Core versions have 4 RAM slots and Dual Core 2 slots. Max 32 gig and 16 gig respectively. Try the reslotting and let us know how it goes. 8 concerts must be OK, assuming that compatible. If the problem persists, please provide the manufacturer for both modules reference numbers.

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• The sound on my HP Pavilion G6-1a19wm does not work

  Hi the sound on my HP Pavilion G6-1a19wm does not work.   His "only" works when you use the audio plug with external speakers.   I tried to uninstall the driver, update the driver, microsoft fix - it and troubleshooting steps.  audio device present in the Device Manager and supposedly working properly, mute is "not"on."  visually everything audio related things suggest that the audio is fine and troubleshooting finds no problem... what else could it be?

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55036.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

  HTH,

  JW

• LG DVD-RAM drive does not read disks in Windows xp

  ? LG DVD-RAM player does not play discs in my Windows xp...
  whenever I try to install the os (operating system) after it has been failed... he couldn't read the original 'os' and every time I install the 'os' by external dvd wrirer... is there any solution to this problem? I want to install "os" to my dvd burner cpu.

  It could be hardware issue, try to run the tool:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  If this tool might not solve your problem, contact the manufacturer of DVD support.

• HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

  Hello

  I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

  And it comes to envy, I bought, Kingston.

  The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

  Don't know how better to explain this.

  If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

  Can anyone help please, it's just the motherboard it is too old or something?

  Thank you.

  See you soon.

  JO

  Hello

  Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

• HP dvd ram uj8c2 does not refresh on hp Pavilion

  DVD RAM has a triangle of warning next to him and I tried to correct the problem by pdating, but it says that the software is already up-to-date. The drive does not recognize any DVD/CD I put in, I would really appreciate a solution to apply, if there is a. I use Windows 8.1 if this helps, thanks

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that fixes the problem.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Pavilion dm3-2020eo does not start after change of RAM

  As the topic says my computer does not start after a change of the RAM.

  I've updated 2 x 2 GB 2 x 4 GB DDR3 SO - DIMM 204pins Rams. When I start the computer after installing new RAM does nothing, all I get is a black screen.

  According to the Spec computers, it should be able to take up to 8 GB of DDR3 RAM.

  Can someone help me?

  Thank you
  Leo

  Here's the key:

  We're working on two sockets and one does not at all.

  You have a bad memory module. It happens very rarely, but it's not impossible to get a new stick of bad memory. Get the replaced bad and I think you'll be fine.

• HP Pavilion dv7-1240us: Pavilion dv7-1240us | Does not - battery LED flashes constantly

  Greetings!  I bought a laptop HP Pavilion DV7-1240US.  When the battery is connected to the laptop and the power adapter is plugged in, the battery light flashes continuously in intervals of 1 second.  When I take the battery, the laptop power not on at all.
  
  I did a hard reset of the laptop, I checked the ram slot connections, deleted and reinstalled the hard drive and still can not get the system to work.
  
  When the battery is connected to the laptop, if I press the power button, while the battery LED is lit, the system will try momentarily in power all keys quick adjustment on the Strip at the top momentarily illuminate, and he tries to switch to the top, only to die as soon as the led turns off.

  Does anyone have an idea what could be the cause of this? I would like to point out that the caps lock and caps lock Num-buttons Flash at all, and there is no beep sounds to speak, so I am at a loss.

  Any help would be GREATLY appreciated!
  
  Thank you!

  Here are a couple:

  http://www.eBay.com/ITM/HP-dv7-1000-506124-001-486542-001-no-video-motherboard-repair-6-month-warranty-/181909455233?hash=item2a5aa60181:g:vpQAAOxy63FS1jWy

  http://www.eBay.com/ITM/HP-dv7-1000-506124-001-486542-001-dead-GPU-no-video-motherboard-repair-/271423878626?hash=item3f321fb5e2:goEAAOSw1vlUwqed

• Pavilion G6-1b59wm does not start

  Nice day.. I have a G6 Pavilion that does not start when you push the power button. I tried it on battery only and with the power supply cord is plugged in. And yet nothing.

  Here's what I see: when the power supply cord is plugged in, the power supply next to the port light is white. I press the power button it flashes white momentarily (and it flashes F12). Nothing else happens. No other led lite, the screen remains black.

  Diagnosis steps followed:

  1. the battery was removed, and unplugged. Start button / stop for 30 seconds and reconnected. Nothing.

  2. battery removed and plugged into the wall. Start button / down stop and nothing.

  3 tried a different power cord, different battery... nothing

  4 removed boards from the RAM, button / Stop button... nothing

  5 deleted from the hard disk (RAM yet uninstalled), button / Stop button... nothing

  Any other suggestions?

  This should help you locate:

  http://WWW8.HP.com/us/en/store-finder/index.do

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion dv4: battery does not charge even when it is plugged (load plugged says), but doesn't move 19%

  Hello hp Support Forums.

  Hardware specifications of the machine (if required):

  Laptop model: HP Pavilion dv4 Notebook PC
  OS: Windows 7 Home Premium x 64
  CPU: Intel (r) Core i5 - 3210M @ 2.50 GHz (4 processors)
  RAM: 8192 MB RAM (4096 MB x 2) DDR3
  Graphics card: Intel HD Graphics 4000 @ 1 696 MB
  Audio: IDT High Definition Audio 16-bit
  HARD drive: 750 GB SAMSUNG Spinpoint M8 ST750LM022 HN-M750MBB

  I own a laptop PC hp Pavilion dv4 laptop and this morning there was a sudden battery problem, I was playing Dota 2 and the Steam interface told me that the battery percentage was 12% (7 minutes from the end) then I moved and grabbed the chager, plugged into the outlet and plugged the charger in laptop a few seconds later the laptop turns off suddenly and won't restart, even if the charger is plugged there no light came from the load indicator.

  A few minutes later do research for similar problems, there was a solution to remove the battery and the charger then press and hold power for 30 seconds and 3-5 minutes then return the battery but it did nothing.

  After with some research, the indicator load on all of a sudden and when I start the laptop it was on 12 percent and billed not (there is no indicator that the charger is plugged) and turns off suddenly without warning.

  Later, with a bit of panic and thought, I removed the battery and the charge light lit, which allows me to boot up the laptop and when Windows starts, I plugged it to the battery and it says: 19% (plugged in, load) so I track for a bit, but it didn't move at all, even when I changed the power of High Performance for HP recommended settings , window 19% available (plugged in, load) but it's just, it, don't move or anything like that.

  EDIT: When I unplugged the charger to move my computer laptop and plugged in again, the indicator not lit and does not charge the battery thus forcing me to shut down or Hibernate, and remove the battery to the charge light.

  Your battery is quite likely to be having no longer life left.

  It is that if your laptop starts up without the battery, since the race, the battery test is not a viable option.