Pavilion g6: problem in the system recovery

Similar Questions

• Pavilion 23-b244 AiO: the system recovery media does not support this computer

  Hey all,.

  I had a power outage (1 TB) HD material on me about a week ago and replaced by a (500 GB) SSD, not purchased from HP.  I then ordered the recovery disc from HP for this particular serial number.  Whenever I boot on the recovery discs, I get "this computer does not support the system recovery media. You are not able to restore the system with the media. "The Minsize argument in the instructions to build on the DVD file provides a minimum of 140 GB, so I don't think I have a new smaller drive system is the question.

  Last month I have updated the firmware to v80.08, and in the bios "product name", 'SKU number', 'serial number of the chassis' fields are all empty.  In "System ID", everythign is empty except UUID and family name.

  I think that's why I'm not able to boot to recovery discs?

  Any help would be appreciated, I have use this computer for quickbooks and have bee unable to do accounting for a week and a half.

  Figured it out! On my Pavilion, you press Ctrl + A in the bios then click on 'System IDs'. Then I was able to type in the ID to build my recovery and support the byte to feature on the sticker under my machine. F10 to save then the recovery media recognized the computer properly and booted up!

• Qosmio G30 - problem after the system recovery procedure

  I Qosmio G30 - 148 who have Windows XP MCE, trying to download some system programs crashed and make automatic restart.

  I then used a RECOVERY CD to recover my system all and followed the instructions on the CD but when finished and restart the system, a famous blue screen telling me there is a problem in my system and windows must be restarted.

  When restarting in safe mode, it is a message telling me that the system is not fully installed. Please, rerun the Setup program.

  You could any body help me in this problem because it's a strange problem?

  Note: I tried to install Windows XP from external CD but the system did not have the hard drive.

  You are right. It's a really strange problem. I don't know if you use some external devices but before you start recovery procedure please remove all connected devices.
  The fact is that this recovery image is designed for this model of laptop and the specific hardware configuration. If the BSOD occurs after the installation of the image it takes little hardware related issue.

  I don't really have any other explanation. Problem is that no one here will be able to offer an accurate diagnosis, and we can only speculate what may be the problem.

  Try to do it again to the recovery facility, but if the problem persists I fear that you need professional help.

• Windows 7 on Satellite A500-1EE - problems with the system recovery

  After five years of good functioning sth went wrong. The system tries to boot but lack access to a device (HARD drive?). And then tries to download files to recover. After downloading the recovery fails and the only option is to shut down the computer. How can I recover this system?

  Recovery process is very simply.
  Did you create the recovery media (DVD)? If so you can use it for recovery image installation.
  Otherwise, you can use HARD drive recovery option (F8 > to fix your computer) and start the recovery image installation.

  Please test F8 option.

  If you have any other questions you are welcome.

• G72-250us: will not perform the system recovery

  After completing the formatting and by copying all the files on the three disks that I made, the recovery program sees no bootable device when restarting. The original hard disk drive (320 gb) cooked and I replaced it with a 250 GB ssd. Ant help or explanation would be appreciated.

  Hi there @caper84,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the system recovery. I'll be happy to help you.

  I found a lot of documents for this problem. Here are some help.

  Troubleshooting problems of recovery HP System (Windows 7)

  System recovery can fail or display error messages (Windows 7 or Vista)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Problems with the updates after the system recovery

  Hello.

  After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

  If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

  Someone knows what's the problem?

  Regards Terry

  Hello Terry,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because corrupt Windows Update files or parameters.

  I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on research.

  b. type Troubleshooting in the search box, click on it in the search results.
  c. click 'show all' and then click 'Windows Update'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, please reset the Windows update components and check.
  Refer to this article:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  https://support.Microsoft.com/en-us/KB/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• NB500 - I can't do the system recovery

  Hello

  I got a nb500 Windows 7 starter and I cannot do a system recovery out-of-the-box.

  I tried "press 0 and power", the pc starts, but as long as I continue to press 0 nothing happens. When I release, it will continue to boot normally into windows. Also tried with f8, I can see the system recovery options, but there is no tool for HARD drive recovery there. I also used a toshiba recovery media Creator called program but when I start, it displays a message «there is no area of hard drive recovery»

  Any suggestions please?

  For some reason any there there no initial access to the recovery image.

  Either it is deleted or the partitions of HARD drive structure is changed and recovery tool cannot find the settings for the recovery image.
  Now, you have little problem. Recovery image installation will not work.

  You have two options:
  1 / you can try to install recovery disc original order of Toshiba - https://backupmedia.toshiba.eu/landing.aspx
  2 / you can install own OS version

  All readers, tools and utilities, you can find and download from the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• In the System Recovery Options administrator password?

  Hello dear users of Toshiba.

  I'm willing to use the "Toshiba Recovery Wizard" in the "System Recovery Options" (after pressing F8 when the computer starts) but when I select Administrator as a user, he invites me for a password.

  I double checked my Vista user accounts and the administrator (me) is certainly not no matter what password that are bound to him.
  My problem is that I can't use recovery tool if I don't log in as an administrator...

  Can someone please help? Y at - it factory default password?

  Thanks to you all!

  Hello

  To be honest, your announcement confused me a bit especially the part where you wrote: but when I select Administrator as a user. I don't understand what you mean with it.
  But first some basic information:

  Can you imagine you use Toshiba notebook with the settings and someone will make a joke and use the F8 option and reinstall Vista. All of your settings, data and pre-installed software will be gone. Or can someone just use cell phones stolen to get around Vista secure password for laptop and do clean install of Vista using F8 option.

  To avoid this Toshiba has this security feature and each try to reload Vista password OS will be refused. So if you use the password to log in to Vista the same password will be required before the installation of recovery begins. By default, there is no password and the name of the administrator account will be shown when you start the recovery procedure. When you enter the correct password, the installation will continue.

  So much about the theory. I don't know how you do and which account you use, but the fact is, without administration account name and correct password, you won't be able to install Vista using this HARD drive recovery option.

• System backup Image against the system recovery disks

  Hello

  I'm new to the system recovery things and I have a question...

  I just bought a new computer laptop m7-1015dx of Pavilion and need to do system recovery discs... (which I realize restore laptop to factory default)... BTW, I have already created the system repair disc.

  However, I read an article on creating a system backup Image allowing you to recovery if lost EVERYTHING, all your installed programs, etc.

  First Question:

  Can someone tell me if I do the backup IMAGE of the system...

  Do I still need to create recovery disk (mfg default) system also?

  The second Question:

  If I create system recovery disks can I still this Recovery Partition?

  I am really really wanting to partition my C:\ drive... it is huge

  In addition, I hate to see storage folders involved in system folders...

  Currently using a symbol/character to separate them.

  From now on, I can't partition the C:\drive all partitions are used as... Max is 4

  and I have 4... C:\drive, System Partition, Partition HPTools and recovery Partition.

  Any help or assistance would be appreciated.

  Thanks for the research.

  Best regards, Jenn

  Hi, Jenn:

  I'd certainly recovery disks because in the case of a hard drive failure, a recovery partition is unnecessary because it would be on the failed drive.

  Recovery disks will do the same as a recovery partition. Reinstall the operating system and programs supplied with your laptop.

  I have also copy off the coast of the C:\drive SWSetup folder and store it on a portable hard drive that contains all files Installer provided with your PC (except MS Office 2010 Starter).

  You can also make your own Windows 7 installation disc and have a nice bloatware without installing windows, and then install only the programs you want from the SWSetup folder.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You can get rid of all the partitions you want to if you plan to use recovery or disc of Windows 7 installation method that I posted above.

  I write my product key and store them somewhere for more security that many people report that it fades if you keep the laptop on your lap a lot, and then you wouldn't be able to use the alternative method to install W7.

  Paul

• The system recovery disk - how do without floppy drive?

  I am trying to create a "system recovery disk" as part of the TOSSHIBA ASSIST (protect and fix the section).

  However, before we proceed, I noted that he was invited to a 'floppy' create a recovery disc but this model without this facility data can be recorded on a CD. I didn't get throughout the procedure and find that I couldn't finish it due to no floppy drive!

  Or otherwise just use the product recovery DVD - Rom supplied with the laptop in case of problem... not sure if this would hold the same data?

  Any help is appreciated!

  Hello Christine

  If you look carefully on this print option (shortcut) it is written to create the CD drivers & tools and in aria info nothing follow description allows to create an external symbol to the top of the caisse de dépôt drivers & tools.

  You use this shortcut, you can simply create Tools & Utilities CD and not the system recovery media. I did a few times without any problem. Equip your optical drive for CD - R, click on this shortcut, click the button BURN.

  All that s!

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• problem with the system restore when you try to back up disks

  my system crashed.  would not boot.  Several attempts later, went to the system recovery... do you have a full upward (23 dvd) then did a complete restore.  laptop works.  However restore my files from the backup disks does not work.  I get a failure in the system restore somewhere in the treatment of the disc 12 (out of 23).  Help!  sighing heavily... of course this happens when I am in a time crunch

  Hello cyberterp. I see that you are having problems to restore your data from backup disks. To make sure that I understand you were able to make the recovery of the operating system, but the data you have saved in the course of the process you're trying to get now?

  Check the bottom of the twelve disc and make sure that there are no scratches on it. If there is even the smallest scratch to find a local store that will shine the disc for you; This can allow you to read the data. If discs are in perfect condition and then either media are bad or there was a problem (unnoticed) during the backup process and it is unlikely that you will be able to recover the data.

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K