Pavilion G6 WON'T START

Similar Questions

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• HP Pavilion DV9888eo won't start with My Book Mirror 2 t connected

  Same problem here: http://h30434.www3.hp.com/psg/board/message?board.id=HardwareDPC&thread.id=4367

  Installation program:

  HP Pavilion DV9888eo, AMD Turion TL-60 x 2, 3 GB of RAM

  Western Digital My Book Mirror 1 t connected USB 2.0

  Windows 7 Edition Home Premium 64 bit (clean install)

  Problem:

  -Won't start if the external hard drive is connected to a USB port

  -Boot freezes, the BIOS detects the drive, shows USB 2.0: WD My Book, fan gets stronger

  Tried solution:

  -Different USB ports

  -Varied, boot order first set internal hd

  -Disconnect and start continues

  -Mouse USB wireless at the same time / plug, unplug, almost worked

  Works okey if hooked up later when Windows has loaded (also works just after when it is plugged in after successful BIOS).

  The closest match: http://www.experts-exchange.com/Storage/Hard_Drives/Q_23769717.html

  Any advice how to solve?

  Message edited by lukevader on 10/11/2009 16:02
  Message edited by lukevader on 11/11/2009 01:37
  Message edited by lukevader on 11/11/2009 01:48

  My conclusion: HP BIOS/USB controller isn't working okey with WD My Book when you start the computer. If you wait about 3-4 minutes, to return to the boot. If you re-create the partition in Windows 7, you might be able to speed up the process. I have converted the MBR to GPT (Google more) and reformatted it NTFS. Reducing a starter and holds a GPT formatted, cannot be a boot disk. Now, there are about 1 min delay. If there is a switch to turn off USB Legacy support, that could help. There is not, thanks to the crappy BIOS HP. You can also seek support from Western Digital and discover interesting things.

  Then, finally, it'll pass the boot.

• HP Pavilion windows won't start

  Hello.. my computer hp Pavilion dv5 laptop starts and immediately after he says from windows will blackscreen with white cursor and hangs. When the computer starts the screen says dhcp... and in turn the line then nofilename or badfilename and when I did the test said some wild-card I think that the hobertkey all other tests, I ran seem to spend of the sections and the system restore won't let me... someone could help me please. Thank you for allowing me to post this... Robert... ps... my laptop is a hp Pavilion entertainment pc... SD.MS/Pro.MMC.xD...and windows 7 ultimate running sound

  Thanks Patnert... I installed windows 8, so I solved the problem... but certainly will use your suggestion in the future must be... I appreciate your time and your suggestion

• HP Pavilion p6510t won't start, need help!

  Hello, we have your desktop HP Pavilion p6510t with the following specifications:

  HP Pavilion p6510t PC

  • Genuine Windows 7 Home Premium 64-bit
  • Intel (r) CPU Pentium (r) Dual-Core E5400 (2.7 GHz, 2 MB L2, 800 MHz FSB)
  • SDRAM DDR3 800 MHz 4 GB [2 DIMMS]
  • 320 GB HDD at 7200 RPM SATA 3 Gb/s
  • Microsoft Office Starter 2010
  • No additional security software
  • Integrated graphics - Intel(r) Graphics Media Accelerator X 4500 [VGA]
  • No speakers
  • LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  • Built-in Ethernet port, wireless
  • Audio Reader, 2 USB, 15-in-1 memory card
  • No TV Tuner
  • Integrated sound
  • HP USB keyboard and optical mouse

  We also bought this monitor to her (though I doubt it's important in this case):

  HP S1931a 18.5 "diagonal LCD screen

  The problem started about two months ago when the computer turns off without reason then that slowed down (before sleep should have started). After the computer restarts, he gave the beep codes that there was a problem with memory (1 short beep, 1 beep, long pause, repeat) long. After power back off and remove all devices and the power cable, the RAM has been removed (2 x 2 GB), checked for dust, bad seats, pins bent, etc...  The 2 RAM sticks have been resettled and the problem seems to be resolved.

  Fast forward two months (a bit more under warranty), the same problem occurs. This time, replace the RAM has not fixed the problem. Sometimes the computer should boot properly and then randomly cut regardless of what the processor was doing (idle or under load of 25% or more). In addition, beep codes would perhaps only half the time where it would not start. The output has been verified for feeding and another (proven) outlet has also been tried. No change. At this point, the computer won't be enough for any start screen at all, not even a blue screen.

  What he do to power on:

  • All powered fans (power supply, fan CPU cooler, case) and a spin at full speed.
  • Hard drive to wind up.
  • Green light on the power supply remains stable.
  • VA CD drive open and close normally.

  What is does not power upward:

  • No display at all.
  • No beep codes.
  • No blue light on the button walk / stop (top of case).
  • CPU does NOT get hot to the touch after 5 seconds to be under tension (with the fan and the heatsink removed and unplugged).
  • With two strips of RAM not removed, no beep of any kind.

  I also tried to use an old video card, I had to hang out, thinking that maybe the onboard graphics card were no longer works. The video card gets power as his fan runs, also at full speed. Still no display.

  I already bought a pair of replacement RAM sticks, exact same specifications and brand (Crucial), no difference. I tried all combinations of each stick into each slot with the original of the RAM in the first place, so I assumed it was sticks and replaced. Now that the RAM has been replaced and no beep codes, I suspect the motherboard or the CPU.

  I also tried to reset the BIOS by removing the battery for 10 + minutes and also move jumper to 2-3 1-2 during 10 seconds and replace (with power off).

  What I want to know is which component I need to replace to get this computer working before its tax season. I'd like to think it's the processor, because it remains cold to the touch after turning on. If this is the case, can someone confirm that this is a suitable replacement? (Intel Pentium E5700 Wolfdale 3.0 GHz LGA 775 65W Dual-Core processor desktop BX80571E5700) http://www.Newegg.com/product/product.aspx?item=N82E16819116381

  If it's the motherboard (I hope not), it can be replaced without having to re - install windows? I can't find an exact replacement for the H - I41 - Μatx Foxconn (Eton). HP has one of these in stock that could be shipped out?

  I know that the computer is already out of warranty (barely) and can do the work myself, but need help to determine the problem I want to throw the money to do this work right.

  Thank you in advance for your help!

  John

  Hello jkalbin, I think a bad mother rather than the processor card. Chess with the processors don't happen often at all. You should never feed a computer with radiator/fan all not attached to the processor. Just 5 seconds without the radiator/fan could easily burn a processor.

  The fact that the processor had no hot does not mean it does not work, if the motherboard does not send power to the processor.

  Motherboard failures are many times more often than the failures of processor. I had one processor to fail in more than 25 years of working with computers.

  Just some thoughts.

• "Pavilion dv6000 won't start after inserting the password

  I have a dv6000 Pavilion laptop with Windows 7 Operting System.  After a few recent updates at the beginning of my use of the computer (instead of at the end of my computer use), when I turn on the laptop, it brings up my user name and a password field, which, once I insert the password, it should redirect me to the window of the Application.  But after having inserted the password, the word "Welcome" with a circle of rotation appears on the display screen. This ' circle' rotates to progress to subject one minute and then display will Dim and never produced the home screen of the Application.  I greeted the dark screen to stay on the computer for more than 5 minutes and the House request never appears.  The only way to shut down Windows is to press Ctrl-Alt-Del, which produces a window with the following options: 1) lock this computer 2). Change user 3.)  Close the session 4) Change a password 5). Start the Manager of tasks with a button CANCEL in the center of the display and of the farm to the bottom of the icon in the lower right with the following options: 1) 2 restart.) (Sleep 3). Hibernate 4). Stop.   I used the option of doen stop to turn off the laptop.  What can I do to solve my problem and use the computer that I use for?

  Hello

  You are welcome

  I suggest you download AdwCleaner this link to delete the associated files - Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  Best regards

  DP - K

• HP Pavilion dv2000 won't start correctly in Vista

  My laptop does not start right. All lights come on and the hard drive makes noises, but the screen is not on (not at all). Options screen, errors or recovery of any manufacturer. This happens whenever I have turn off my computer, or the battery dies. Sometimes it will start and I get chkdsk and recovery options, but it takes several tries.

  Thanks for any help you can provide.

  KappaFox

  My OS is Windows Vista Premium

  My laptop is HP Pavilion dv2000

  The PC was purchased in 2007, so it might be giving up.

  Hi Kappafox,

  As well as what Michael posted, please use the link below to the HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01087277&LC=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Pavilion m7100y won't start up

  I have a m7100y to 2005, which gets power but will not start. When I opened it it was very, very dusty inside. I cleaned it thoughly and got the same result. What is the PV of light solid blue power run fans and then a constant, a beep occurs but the computer never comes to the top, nothing on the monitor. I disconnected all devices and unplugged all cards from the motherboard. same result. Any ideas?   Thank you.

  Here is a guide to help you test the power supply.  You can perform a search of video guides on making the test.  Let me know what you find.

• HP Pavilion dv6000 won't start

  My laptop does not start. just replaced the battery thinking that might be the solution but it was'nt. When I press the button come from blue light on but nothing on the screen then the laptop turns off on its own or the lights will Flash several times then turns off? I hope that someone has encountered this problem before and has some type of solution. Thanks in advance for your help.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

  Check with a real computer store (one that makes its own service internal and not of leeks)
  and displays a Best Buy or other stores) or system manufacturer support. Also
  Ask known problems in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Pavilion dv6 won't start - black screen

  
  

  Hello

  It is always interesting to try first following a Hard Reset.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Plug the power adapter (leave the battery for now) and see if the laptop boots.

  If the above doesn't help, can you post back with the complete model number and your notebook dv6 series Nr - see here for a guide to the location of such information.

  Kind regards

  DP - K

• Pavilion t390nl: HP Pavilion t390nl won't start

  Off the computer this morning (after being on standby for a few days), I tried to reboot a few hours later. Computer unbootable, no respons at all? Nothing has changed since this morning. Nevertheless, I checked all the cables, etc., but nothing seems to be wrong.

  Someone has a possible explanation for this or is this the end of my computer (purchased in 2003)?

  Thanks for your response

  WimPee

  Wimpee, welcome to the forum.

  I think it could be a failure of the power supply unit (PSU).  Here's a guide to help you troubleshoot it.  If it is a defective power supply, you should be able to replace it with a standard ATX.  I suggest to measure the PSU existing and comparing measures to whichever you choose to replace it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• hpdv6000 won't start - error updates configuration? !!

  My HP Pavilion dv6000 won't start.

  When I turn on my laptop it goes through the normal stages of start-up, however it comes up with "configuration updates: stage 3 of 3-0% complete.". Do not turn off your computer.

  It remains on this page for a few minutes with the hourglass of thing going, but nothing happens - it stays on 0%

  The computer then turns off and turns back on again and repeat the process of a second later.

  I can't clear the checkpoint!

  This morning, I thought that it would be alright because instead of going to the screen updates it came with the users screen. I clicked on my profile, entered my password, but then it froze. ??!!??

  So I have held down the power button, it has left a few minutes and turned back on but not luck.

  Continuing along in circles.

  Help... :/

  Hi catMshaw,

  Take a look at the procedure in this document and let me know if this helps your situation.

• HP Pavilion won't start

  How to fix my computer hp Pavilion laptop? I clicked the button refresh settings, I was afraid of losing my files so I turned it off when updating. And now it won't start.  I tried pressing f10 but I don't know what to do. Can you help me?

  Re-read my last post. I have already explained what you use. You will need to bot to a backup flash drive or a DVD in Windows 8.

  You can also start HP recovery support to access the Startup Repair.

• HP Pavilion won't start not

  Hello

  My HP Pavilion (info below) is does not start. She asks the system repair CD I bought them at HP but the system is still not recognizes them and won't start do not. I have run all diagnostic tests (hard disk, memory, etc). All the great test, no problem. Suggestions:

  Model number:

  LW407UA

  Description of the model:

  LAPTOP HP PAVILION G7 - 1113CL

  Serial number:

  [number of Series edited by Moderator]

  Creator:

  RYYCEBL

  Hello

  Try the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as coming from a 64-bit installation...

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select the Boot Menu options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Select the "Repair your computer" option and follow Option 2 in the guide on the link below to run the Startup Repair - you may need to run this 2 or 3 times.

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  If the above does not help, take note of any error message you get during the procedure and include them with your next post.

  Kind regards

  DP - K

• HP Pavilion DV7-2270 won't start. Even when it does it stops or BSOD comes up.

  Number and name of the product
  HP DV7-2270us

  Operating system installed
  64-bit Windows 7 Home Premium

  Error message
  Technical information BSOD

  STOP: 0X0000000A (0 X 0000000000000190, 0XFFFFF80003E8C65B, 0 X 0000000000000002, 0 X 0000000000000000)

  Question

  My laptop won't start and when it does stop down suddenly or BSOD screen comes up. My battery died and when the computer starts, it displays a message on this subject. I've updated the BIOS and driver software but could not solve this problem. It is used to run and operate perfectly. Help, please!

  Problem solved! A loose chip (graphics card) has been the cause of all the problems. My laptop works as fine as ever. It was also the problem of previous versions of the laptop dv6/7. So, you just need to check if the graphics chip is loose. If so, welding, it will allow to solve! Good luck!!