Pavilion g6t-2300 CTO select: seeing power HP Pavilion is still on even after closing down and the battery won't charge no - 10 Windows

Similar Questions

• Unable to determine the type of AC power adapter. Your system will run more slowly and the battery won't charge.

  I get the error message is: AC power adapter type cannot be determined. Your system will run more slowly and the battery won't charge.

  Hello
  (1) when you receive this error message?
  (2) what is the brand and model of your computer?
  (3) did you change on your computer before this problem?
  It seems that the adapter has gone wrong, I suggest you to connect another card and see if the problem still occurs.
  You can also contact the computer manufacturer for assistance on this issue.

• Pavilion 17 "and the battery won't go out.

  A few weeks ago, I bought a 17 "HP pavillion (so its new brand). I've been running it through the power cable for the most part I can't move it and use it essentially as a desktop model. I put in the battery or yesterday to use / run down it and then load it back to the top (I was advised to do once a week), but when I decided to take the battery back after it has been loaded, it doesn't move.

  I tried to slide on the locking mechanism, but it won't move to the left at all. She will move to the right about 1/8 "(the cursor is on the right, as it is) and seems to make the plate on the bottom and under the cursor, pop up a little bit. I could easily put more force behind pushing the slider on the left, but I'm worried about breaking it.

  I brought it. "a fault" and the laptop will be exchanged. So if someone else this problem, bring it to where you bought it. Fortunately, I'm still within the period of guarantee and Exchange

• Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Ivan,

  If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• Satellite L755 - suddenly then turn off blinking of power and the battery LEDs

  In recent weeks, when using the laptop (Satellite L755 psk2ye) he died suddenly and the power and the battery leds start flashing simultaneously.

  It also takes place when charging the battery when the unit is off... then l must cut off the power and he'll be back... Although the problem sometimes occurs again after a few minutes hours or does not...

  Remove the battery and check if the same problem occur when you use laptops with power running.

  Please post comments.

• When I pick up my Windows 7 Acer Aspire power, the computer turns off when the battery shows fully charged

  I HAVE A CHILD OF 1 YEAR ACER ASPIRE WITH WINDOWS 7, WHICH IS CONNECTED TO BE WIRELESS. BUT WHEN I GET MY COMPUTER TURNS OFF THE POWER SUPPLY CORD. THE BATTERY SAYS FULLY CHARGED. IT WORKED AND NOW IT WONT. SOMEONE CAN ME SAY WHAT THE PROBLEM IS. I EVEN WENT BACK THROUGH HIM WITH DEFAULT AND IT DID NOT HELP.

  Hello

  Are you aware of any changes made to the computer, before the show?

  I suggest to change the power management and check for the issue.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  If the above does not help, I suggest you to contact Acer support for assistance.

  http://support.Acer.com/us/en/default.aspx

  I hope this helps.

• Pavilion DV7-3162nr: HP Pavilion DV7-3162nr does not turn on and the battery light flashes during charging

  I was upgrading my HP DV7-3162nr for windows 10 when all of a sudden the laptop stopped working and would not turn.

  The power adapter is plugged in and battery led was flashing. Now battery led does not at all depend on. When I press the Start button the laptop would try to start then turn off after about one second. However most of the time when when I press the button nothing happens.

  I took out the battery and tried to immediately start the alternating current, but the laptop is like there is no power. The led near the power connector is on the AC adapter is plugged in. I checked the tension between the adapter and it is correct to about 19 volts, I even loaded to 1.5 Amps and voltage remained close to 19 volts. I tried now on the button for more than one minute with applied power (no battery or AC) and no change when I tried to start with just AC.  The battery is old, but shouldn't the laptop run on just the AC adapter with the battery installed? I do not think that windows 10 has done this, but it's a weird coincidense that he died during the upgrade.

  I read about simular problems with flags of HP but nothing exactly like it.  The fact that I can not turn on the laptop with just the adapter seems to be a problem really bad.

  Anyone has any ideas I can try to let me know

  I was able to fix my laptop.

  I thought that it must be a hardware problem, because the laptop would not run just the adapter. And the adapter was good, as I said, he had the right voltage and can support the load.  So after looking at a lot of U tube videos on how to disassemble laptops and looking for schematics on the laptop which I couldn't find. I disassembled the laptop and a beep on the load circuit and it showing. What I found, it was a bad MosFet at the beginning of the charging circuit. The MosFet P/N P0603BDG has shorted door to the Source.  I was able to get the part of China via Ebay for less than $5.00 total and it took a week to arrive.

  Now, the laptop charging the new battery and works very well. I could have found the bad MosFet faster if I had diagrams. Does anyone know if it is possible to get the schematics for this HP laptop? I found a manual and it helped a bit to disassemble the laptop, but he had nothing on the main map.

  This problem is now solved hope it helps someone out there.

• HP Pavilion HPE H8 1234: HP Pavilion HPE H8 1234 corrupted BIo 8 beeps and the led lights

  I was updating my BIOS and I got an error. Now, the coomputer starts with 8 beeps and 8 power botton blinking LED. IV tried WIndows update Bios USB, key and B. Im running outta ideals. Someone help me please.

  Hello

  Situations of BIOS corrupted can be not recoverable with some versions of the HP BIOS.

  Disconnect the PC and remove CMOS battery and press and hold the power button for 60 seconds. While the battery is removed, test it with a voltmeter-ohm - and if it isn't close to 3.3 volts, then replace it.  It's a $4 item.  If the battery is good before you reinstall it, plug the PC back in and give it a go.

  This procedure of recovery of the HP BIOS claims to work by internal HP.  Read the instructions carefully.

• Try to scroll to see the folder of photos. I scroll down and the scroll bar jump upward.

  I want to display an image file.  When I scroll down and drop the scroll bar of the jumps back to the top.  I can't access all files below a few albums.  Until I have a chance to click on the folder to open it, the bar rises to the top.

  Hello CathiVanderhave,

  Please provide the make and model of your PC. In addition, please relay if the problem occurs when you try to view other files. You also try to perform a clean boot to verify if a background program may interfere. To do this, please see the link below:

  http://support.Microsoft.com/kb/929135

  Thank you

• Driver missing for basic system devices and the battery for hp Pavilion dv6-2174tx issue

  I have a hp dv6-2174tx with no. WT464PA #ACJ and recently installed 8.1 windows 64 bit. I installed various updates Windows update but still can't find the drivers for the following...

  Bus PCI 4, device 0, function 3

  Bus PCI 4, device 0, function 4

  Bus PCI 4, device 0, function 1

  and some unknown devices with location:

  on PCI Express Root Complex

  on Intel PM55 Express Chipset LPC Interface Controller - 3B 03

  Also my battery does not load from 49 percent. It will show "plugged in, not charging", if I remove the charger, it will start to unload and when I plugin the charger it will charge you up to 49%.

  Help, please...

  Hello:

  Here is the driver for the base system devices.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75510-1&cc=us&DLC=en&LC=en&OS=4063&product=4172062&sw_lang=

  I'll take a guess on the unknown device...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125640_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If this does not work, I need to display the hardware ID's for devices that need drivers.

  To find this info, please follow these steps...

  Go to Device Manager, find the other devices category, and then click the device that need pilots.

  Then click on the Details tab in the upper part of the device window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters you see in the window.

  I don't know what is the problem of battery, so I can't help you with that.

• Pavilion DV-7: My display brightness is down and I can't control it

  I have a Pavilion DV - 7 with windows 10 on it.  Recently, my screen went dark on my buttons for the brightness has stopped working and not where.  It's really hard to work on a computer that is half of the zero shine please help.  I don't know what happened!  I don't know where the luminosities are 10 windows, I tried inside the power options, but no luck.  HELP PLEASE!

  Thank you!

  In the meantime, I just uninstall the AMD driver through the Device Manager and it solved the problem, at least for the moment. I don't know that it will try to install it again with a future set of updates. For now, I'll hang on and wait until the next break.

• HP Pavilion about 2 to 3 years: on the computer card reader HP laptop won't charge photos from Windows download 10 - please help!

  Hello I would appreciate help!

  Since download Windows 10 card on the side of the computer reader will download any pictures.

  Rose from 8.1 to Windows 10 Windows.  Card gives Reader 2 Bell Rings when the card is inserted and 2 Bell Rings when removed and not pictures.    It worked fine on 8.1.

  This is an old HP Pavilion about 2 to 3 years.  Not sure if 32 or 64 bits.

  That would really grateful for the help. Thank you.

  Hello:

  See if the W10 Realtek card reader driver from the link below solves the problem.

  You want the first driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• My iPod stop now, it won't turn even after be plugged into the power supply for more than an hour

  IiPod touch than 64 GB itself now cut an hour plug into the current af it starts

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Pavilion 500-281: where to install a SSD and the best way to get the operating system on it

  I have a Pavilion nine 500-281 with Win 7. I bouight a SSD 128 GB to load the operating system on it.  Where can I get inside the chassis? It seem not to be berries of classical records. It came with an adapter with the screw plate, but it's not obvious where I was able to ride the thing!

  In addition, can I just run a restore to get the OS on the SSD drive, once I have installed?  I received instructions with the SSD for ADATA software copy an image of the disk, but all I want is the operating system.  I'm dying to start using my new computer, but I think I want to get the reader installed first before you make any changes that he.

  Hello

  Review the #8 message in this thread.  Not all models of the 500 - 2xx Pavilion are provisioned for the SSD in the location as shown.  In the indicated installation, an adapter plate was not necessary.

  Most SSD manufacturers have free software migration.  I suggest that you image the entire HD, all partitions even hidden partitions.  Some of the more recent migration software will allow you to exclude your data records.

• CC not see update, even after logging out and back in

  I applied successfully upgrades to Illustrator, InDesign, etc. this morning, but the creative cloud does not see the update of Photoshop. I'm stuck on the 2015.0.1 version, but when I use the creative cloud app to check updates, it says to update Photoshop. I tried logging out and back in CC, quit the CC app and even reboot, with no luck.

  Mac OS X 10.10.5, CC App 3.4.1.181.

  Hello

  This link may help: I can't find the new update 2015.1

  Kind regards

  Sheena