Pavilion g7-1150us - memory access

Similar Questions

• Glued on Pavilion g7-1329wm memory access cover on?

  The memory on my renovated Pavilion g7-1329wm access cover seems to be stuck on. is this normal?  The two setscrews are relaxed, but the cover is firmly in place.  Am I'll break the cover if I try to remove more that I'm already scared. Suggestions?

  Hello:

  It is not glued down and it is very difficult to remove. Just be careful and raise nearly all of the tabs.

  See this post... next to the last entry and related links I posted (post shaded green).

  http://h30434.www3.HP.com/T5/notebook-hardware/Pavilion-G7-1150us-accessing-memory/m-p/1578347#M73644

  Paul

• Pavilion g102: adding memory access

  I bought an additional memory module to add a new machine, but how do I add it? What I really need to remove the cover from the bottom (20 screws)?  Seems a bit excessive.    Any ideas where I can find a service manual?

  T I A

  Steve

  The current trend, I'm afraid. If you have not done this before that I can't offer to go forward. But here is the Manual:

  Manual

  See pages 36-37 and 43 in particular. A lot of screws, but at least you have not need to remove the motherboard to get on the RAM slot.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I have a HP Pavilion A6700Y. Currently, access to internet by modem. Want to go wireless and use

  I have a HP Pavilion A6700Y.  Currently, access to internet by modem.  Want to use the Wi - Fi and wireless.  Any ideas on how to do it with this computer.  If so, what would take?

  cmm0822bam wrote:
  

  I have a HP Pavilion A6700Y.  Currently, access to internet by modem.  Want to use the Wi - Fi and wireless.  Any ideas on how to do it with this computer.  If so, what would take?

  What type of modem do you have?

  Do you hear an old style phone modem or a cable modem?

  If you have a cable modem and it is not wireless, then you'll need to buy a modem wireless also has four LAN ports. Connect the WAN port on the router to the modem that provides your internet connection and then configure the SSID of the router and the wireless PC network card.  The easiest to install and configure is brands like Linksys and Netgear. Your PC with a built-in B/G wireless network adapter. Purchase of a high-tech Wireless-N Dual band Router router would be too much serious.

  Best regards

  ERICO

• Reading binary Dump using the DMA (Direct Memory Access)

  Hi all

  We are trying to measure short-term frequency using the SR620 (frequency meter) via a GPIB-USB connector. We are trying to understand how to work the controls GPIB, and it seems that you normally send a query and then ask him to read what says the instrument. However, as we try to make a measure of frequency stability in the short term, we use the binary Dump command (BDMP - explained in the manual, link below). To read this data, you do not use the standard playback function, you use this process called base (DMA, Direct Memory Access). The maual speaks DMA and the example code in the maual seems to use DMA to read the data that results.

  We have been able to trigger the display of "binary output" on the instrument using LabVIEW and interactive control via the NOT-MAX. The question now is: How do we implement DMA by using LabVIEW? More specifically, how we implement DMA reading of the SR620. It doesn't seem to be anything close to it in the code of LabVEIW included. There are examples that use the DMA with IVIs, but we had difficulties to change to work with the SR620 code.

  Useful links:

  Manual for SR620: http://www.thinksrs.com/downloads/PDFs/Manuals/SR620m.pdf

  Possible example DMA? : https://decibel.ni.com/content/docs/DOC-9893

  DMA explination: http://zone.ni.com/reference/en-XX/help/371599J-01/lvfpgaconcepts/fpga_dma_how_it_works/

  How to make DMA: http://www.ni.com/white-paper/4534/en/

  Note: When we did not step 1 passed because we have problems adding a new target of the FPBA, because there is "".

  Yes, in ' 89, you probably use a DMA to store the data fast enough.  In 25 years, things have become much faster.  What I did to somehting similar is to save the data to a file as it is being read.  If you want more performance, use a producer/consumer.

  

• Malware & memory access problem

  I have a problem I have the thing about security scam "Smart Antivirus Protection" that appears on and outside. I ran a scan that tells me I have a problem to access memory at address Ox1FC408, with a note saying that if I see this error, operational information may be lost. Also this Trojan:Win32 / Sinada.R and Trojan: Win64 / Sinada have been detected but not deleted. How can I fix the memory access and to get rid of these problems of Trojan. Thank you.

  Hello
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• memory access voilation

  I m using windows xp sp3 edition media center, 1.5 GB of ram.

  When you use tally erp9 my score program gets hanged and
  the error shows that:
  software exception c0000005
  (memory access voilation)
  I already formatted my system and downloaded the last
  security internet Kaspersky 2012 but showing the same thing again.

  Do a little research on Google, which seems to be a popular issue with Tally (especially after a score update/upgrade), but I have not found a "solution", but I did not read all the threads at the end then you want to do some research on Google and see what came you on their part.

  This c000005 error is a problem of "permissions" somewhere.  Something wants permission and cannot get it, if you get this error c000005.  It is probably not a Kaspersky problem unless Tally wants to change something and it does not leave by Kaspersky.

  Tally has its own support Page, so you can ask your questions here:

  http://www.tallysolutions.com/website/HTML/index.php

• HP Pavilion dv7 laptop: memory

  can I use:

  16 GB memory DDR3 1600 (PC3 12800) latency Cas 9 speed (2 x 8G)
  Schedule 9-9-9-28 voltage 1.5V
  Multi-channel Kit Dual Channel Kit

  in this laptop?

  Here are the Crucial http://www.crucial.com/usa/en/compatible-upgrade-for/HP-Compaq/pavilion-dv7-6c63nr memory.

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Pavilion-dv7-6c63nr

  I was unable to find guaranteed compatible expansion modules appear to be available to Kingston or Corsair.

  Guaranteed compatible using modules in a major memory manufacturer upgrade is the way to go if you want no surprises when you plug new modules. Do not add the new memory module that is already there. Remove the original memory unless you can locate a module that is identical in every respect to be placed in the empty soDIMM slot. You don't have to try to match the specifications of the module of the computer laptop memory published unless you like surprises.

• Error when you try to play the game: memory access violation

  memory access violation

  I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".

  Your sound card that is more than adequate.
  If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
  I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.

  Then restart and reinstall the game.

  Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if that helps.

  Marilyn

• Pavilion G7-1150us: CPU Upgrade?

  I wonder if I can upgrade the processor on my Pavilion G7-1150us. I need to know if I can update, not that I can move on. If I improve, I'll upgrade to intel core i7.

  jdnl12 wrote:

  Is it possible to upgrade?

  This page lists upgrades can take... for the processor.

• Do I need to install the player "Direct memory access controller? It is a 32-bit windows 7 Professional.

  Here is the story:

  I install an OEM Windows 7 Professional 64 bit for its new PC, he is not happy. and I replaced by 32-bit professional to formate the system with the same product key. (I ve been said the keys are for 32 and 64) and it works.

  A few days later, the customer complain that "Direct Memory access controller" is missing.

  He's going to the Device Manager, > system device, > "Direct Memory access controller", he said: "no drivers are installed for this device.

  But I check other computers are all the same, and people online says there is no driver for this at all.

  However, the client argued that this technician Microsoft told him the computer isn't good and 100% need the driver for it!

  It is "you can find or do we need this driver?

  Help, please!

  install the adapter driver mother and chipset driver or manufacturer of contact system

• WebLogic crash after error 'illegal memory access.

  Hi all. WebLogic application crashed after receiving an illegal memory access error. any thoughts...
  
  Error message: illegal memory access. [54]
  Signal information: si_signo = 11, si_code = 2 si_addr = 0xb5778850
  Version: BEA JRockit (R) R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-l
  Linux-ia32
  
  
  The Weblogic administration Console does not start since the accident of Jrockit. I have attached the startup log failed.
  
  < 8 January 2009 11:13:22 AM MDT > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: java.la
  NG. ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
  java.lang.ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
  
  
  
  Journal of weblogic admin stdout:
  
  Java home = / ps_opt/wl92/jrockit_150_12
  Ligne de commande java = java - jrockit-Xms256m-Xmx256m-Dweblogic.Chunksize=65536-Djava.util.logging.config.file=/ps_opt/wl92/webserv/myserver/applications/peoplesoft/logging.properties-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Dweblogic.Name=WebLogicAdmin-Dps_vault = / ps_opt/wl92/webserv/monserveur/psvault-Djavax.net.ssl.trustStore=/ps_opt/wl92/webserv/myserver/keystore/pskey-Dweblogic.ProductionModeEnabled=true-Djava.security.policy=/ps_opt/wl92/weblogic92/server/lib/weblogic.policy-Dssl.debug=false-Dps_home = / ps_opt/wl92 weblogic. Server
  Options Java jrockit =-Xms256m-Xmx256m - Dweblogic.Chunksize = 65536
  < 8 January 2009 11:13:20 AM MDT > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:
  /ps_opt/wl92/weblogic92/platform/lib/p13n/p13n-schemas.jar:/ps_opt/wl92/weblogic92/platform/lib/p13n/p13n_common.jar:/ps_opt/wl92/weblogic92/platform/lib/p13n/p13n_system.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_common.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_schemas.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_system.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/wsrp-common.jar:/ps_opt/wl92/webserv/myserver/lib/endorsed/xalan.jar:/ps_opt/wl92/webserv/myserver/lib/pluto-1.0.1.jar:/ps_opt/wl92/webserv/ MyServer/lib/portlet-API-1.0.jar:/ps_opt/wl92/webserv/MyServer/lib/ps_patch.jar >
  < 8 January 2009 11:13:21 AM MDT > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with BEA JRockit (R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-linux-ia32 of BEA Systems, Inc. >
  < 8 January 2009 11:13:22 AM MDT > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: java.lang.ClassFormatError:
  com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
  java.lang.ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
  at java.lang.ClassLoader.defineClass1 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  at java.lang.ClassLoader.defineClass1 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  to com.bea.xbean.store.Cur$ Locations. < clinit > (Cur.java:482)
  to com.bea.xbean.store.Locale. < init > (local .java: 168)
  at com.bea.xbean.store.Locale.getLocale(Locale.java:235)
  >
  < 8 January 2009 11:13:22 AM MDT > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
  < 8 January 2009 11:13:22 AM MDT > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >
  < 8 January 2009 11:13:22 AM MDT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >

  Hi Nicolas.

  Is this patch for Weblogic 9.2? 92MP3 no patches
  Is what version of Peopletools? 849.09
  What OS? Linux 2.6.9 - 67.0.20.ELsmp
  He broke down at the start? Yes, it will fail when trying to start the administration server

  Let me know thanks

• HP Pavilion X 2 10-n030ca: 10-n030ca HP Pavilion X 2 memory card

  I wonder what type of memory card can I insert in the slot for memory card on the screen.  Once inserted, can I use it as an external hard drive (e.g. drive d?)

  Hi @midorik,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your computer HP Pavilion x 2-10-n030ca and concerns with the type of memory card. Your laptop supports Micro SD card reader as described on page 1 ofyour instructions. Yes you can use it as an external hard drive.
  
  Please let me know how it goes.
  
  Thank you.

• Pavilion p6608f: upgrade memory for p6608f

  Hello, my Pavilion p6608f came with 4 GB of RAM. I want to upgrade. By HP features, the motherboard is a MSI ms-7613 and it should support up to 16 GB of RAM (4 x 4 GB DIMMS). I bought 4 DIMM which seem to fit specifications, but the computer wouldn't POST after installation. I tried reseating the DIMMs, but no luck. My hypothesis is that the memory is not compatible.  I'm unable to find good information on the compatible memory for this computer on the site of Kingston, MSI site, or the site of HP. (Any ideas on one) why the memory I bought is not compatible and b) how to find compatible memory?

  Thank you.

  Saw that Crucial guarantees their recommendations, I'd go with it.  You may contact their Customer Service to see what they have to say if you are still skeptical.  I have recommended Crucial memory for years without reports of incorrect memory being received.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP pavilion dm1 - test memory failed

  My Hp Pavilion dm1, hangs as soon as windows starts. I went the system diagnostics and ran the development of the system, but it failed. Here are the results:

  Memory test: failed

  Failure ID: 9C4FNJ-5NU6J9-MFH15F-404303

  PRODUCT ID: LW200UA #ABA

  I don't know if I have a faulty memory module or if it is a problem that can be fixed with a system restore? Can someone help me please?

  Hello:

  You need to replace the memory module.

  Try first, remove and replace it.

  If you get the error, buy one with the same characteristics as the bad.

  If your laptop is still under warranty, contact HP technical support for a replacement of the faulty memory Strip guarantee.

  Make sure that you remove the battery and disconnect the laptop power adapter before working inside.