Pavilion G7-2110ex: interdace card mother sata type! for experts

Hello
I have a pavilion g7-2110ex laptop

How can I determine the SATA interface on the motherboard type?

Download Speccy and find disk hard details listed:
http://www.Piriform.com/Speccy

Don't worry, they are all compatible which means you can use a SATA 1 drive with a SATA 1/2/3 connection. It will suffer just a little in terms of performance

Concerning

Visruth

Tags: Notebooks

Similar Questions

  • Pavilion Elite 300Z: identification of card mother sata socket

    My card mother Aloe-GL8E has 6 sockets SATA of different colors - black, white, blue, yellow, red. What the colors mean on this forum, as I think they are all 3 GB/s? I want to add a second HDD - does matter which plug it goes in?

    The plugs are numbered from 1 to 6.  The boot order will follow in succession.

    I found a reference.  Can you check the color and number?

    Dark blue - disc 1

    White - disc 2

    Light blue - Disc 3

    Yellow - disc 4

    Red - disc 5

    Black - disc 6

  • ESXi 3.5 does not start after the failure of the card mother SATA port 0.

    I have a DELL PE1800 with ESXi 3.5 U3 Server installed on HD1. The card mother port SATA 0 failed. I bought a new sata, Rosewill RC-218 controller card. Installed and attached hard drives. Configured the BIOS to disable the integrated and restarted sata controller. Now ESXi 3.5 will not start.

    My old configuration has two hd with ESXi 3.5 U3 on disk 1 and my VM on disc 2. Now no drives are seen by ESXi 3.5. Yet see bios of them.

    Todd L.

    Another thing you could try is to install ESXi on a USB key. http://www.yellow-bricks.com/2008/07/29/ESXi-35-update-2-on-a-USB-memory-key/

    Plug your storage space on good sata port. I have an eye for a sata controller from dell PERC 5 can be had quite cheaply on ebay and others.

  • HP Pavilion s7210n card mother SATA compatibility

    Hello

    I have a question on a motherboard that is installed in a PC HP PAVILLION of Slimline s7210n, purchased in 2005.

    This is all the part # and other information that I could see on the motherboard:

    PTGV-LM
    N13219
    C58S198-00877-60-MBL3A2-A04

    The original hard drive is SATA 1 (1.5 Gb/s).  I would like to replace the original HDD with a SATA 2 (3 Gb/s) HARD drive.

    The motherboard has 2 entry SATA connections.  The connection that is not used is labeled "SATA 3" on Platinum motherboard.  I think that it is a 'SATA 2' port and model of PCB plate refers to the speed (3 Gb/s) since SATA 3 (6 Gb/s) is only available in 2009.

    This PC was purchased in 2005.

    A SATA 2 HARD drive will work with this motherboard?

    Hello:

    A SATA II HARD drive will work, but only at the speed of 1.5 transfer in this PC.

    That's all the 915 chipset can handle.

    The port numbers are only of numbers, not of speed of the sata drives.

    You plug certain devices into ports with some numbers.

    For example, you would plug the bootable hard drive into port 1, port 2, a DVD in the 3 port high school.

  • Pavilion dv7 - 4150sr: replacement card mother dv7 - 4150sr

    Hello, I need help!

    I have Pavilion dv7 - 4150 notebook sr and his mother is damaged.

    Would you please provide the part number so I can replace it because there are no manuals or any other information with part number for my motherboard.

    I'd appreciate a lot.

    Thank you in advance.

    Here are the specs:

    http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02505611

    We need to understand from the Manual:

    Manual

    the motherboard you have. You have the i7-720QM with 1 discrete graphics Radeon gig (switchable actually) and you have the subwoofer, so it's your motherboard:

    With ATI Mobility Radeon HD 5650 subsystem separate graphics card, 1 GB of dedicated memory (Quad Core) and the subwoofer v.1.1 615313-001

    Not cheap on amazon.com:

    https://www.Amazon.com/HP-615313-001-Board-sys-5650/DP/B0153J13A8/ref=sr_1_1?ie=UTF8 & qid = 1465827454 & SR = 8-1 & Keywords = 615313-001

    I couldn't find it on eBay. You can try HP Partsurfer but usually the price there is about the same as amazon.com.

    If I know that you were really interested, perhaps we can expand the search to find it at a lower price, but I expect it to be much less than maybe $175 it is a motherboard upscale a few years and get harder to find new.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Pavilion Elite m9077c mystery card mother front USB 2 cable location

    After replacing a defective on my Pavilion Elite m9077c PSU, I have a white cable not identified from the slot to USB before IPIBL - motherboard ASUS 2 which ends with a mount of squeeze and I think it is a connector type B four-pin USB. Please tell me what it could be.

    Looks like you have disconnected a little more that you should have. This connector must be the memory card reader on your box to the motherboard USB header.

  • Pavilion 15-n003tx: replacement card mother HP

    I have a Hp Pavilion laptop which the warranty period has expired. A few days ago, he got shut down and never restarted. To the service center, I learned that the motherboard of the laptop is faulty and must be replaced. Can I get my motherboard replaced? If Yes, then this could be the costs involved to get a new motherboard, if my PC has an Intel i5 processor 4th generation? HP company will replace the part of the authorized service center?

    Motherboard part number:

    Intel Core i5-4200U 8670 M 1.6 GHz (1 GB DC BGA 15 W) for use with Windows Standard 737669-501

    Repair manuals

    http://www.eBay.in/GEB/ImportHubViewItem?Itemid=141723591267

    They are expensive because it's the card motherboard and CPU together.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Adding a video card in a hp pavilion p6620f with a card mother n-alvorix-rs880-formfat (alvorix)

    I want to replace the video edge in this computer with a video card. I want to use a card geforce n210 1 gb ddr3 pci express dvi/hdmi. Anyone know if it will work. It seems that this is what I see so far, but I'm not a computer person. I want to be able to put a tc in my TV and be able to play some of the new games.  Thanks for any help

    Hello

    The graphics card must be a PCIE x 16 compatible (for the expansion on the motherboard slot) one. Geforce n210 will definitely work, because it's a pcie x 16 card compatible USB2.0. You have a desktop computer, then that means that any pcie 2.0 x 16 graphics card might work and it's always on your wallet and the power of the power supply.

  • HP pavilion DV5-1050ee replacement card MOTHER

    Hi HP, im asking if there is a replacement for HP pAVILION DV5-1050ee motherboard. What is the part number? Ive tried to search for the replacement of the motherboard but it only displays motherboards for intel processors , and not the Processors AMD tried to look... my laptop has been "struck" by the insects and my tech says the motherboard was faulty...

    more info: I'm from the PHILIPPINES...

    Hello

    The old motherboard must have a part number. If you want to reuse other components you must same room. Others may work and may not, you want to take a risk?

    Kind regards.

  • Pavilion Touchsmart 23 F250 card mother upgrade?

    Hi I have a question for the exprerts my HP has the following specifications in this link to the site of hp http://support.hp.com/us-en/document/c03791255

    Can I put in a new motherboard, if so should I get new power supply currently I have the standard laptop to factory default power supply (portable type) allowing only 65w FM2 processors and what will happen if I tried to put in a 100w for example processor AMD A10 - 6800 k?

    Certainly the AMD A10 5700 (Trinity) Quad Core APU.  These are actually the APUs.  I consider also hit the RAM installed up to 8 GB.

  • HP Pavilion G5451sc desktop PC: card mother HP Pavilion G5451sc Desktop PC Cupertino

    I have a huge problem

    PC reinstalled with win7pro 64-bit and as a single partition on the HD, no recovery partition hole.

    When I install drivers HP relinquish power in the building, at the time I was updating the bios, I have now it is a very bad question, for the moment I'm not able to boot the PC with no thr ROM bios, only a black screen and a large number of PIF.

    I see that the motherboard have som jumperes to 7 pins, with a text "bios recovery.

    Is it possible to enter a new bios for the ROM, somehow?

    Or is it a new motherboard?

    Thanks in advance

    Hi there @DK-bjarnep

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand you are trying to recover from a BIOS installation failure.

    Since the system does not have a recovery, or tools, partition the BIOS recovery method is not possible. The support page has an update for the BIOS, so this isn't really an option more. During a search, I couldn't find this updated version.

    So you may be stuck with a replacement of the Board of Directors.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  • HP Pavilion G6 2005ax: laptop card mother short circuit?

    Hey everybody. My laptop does not charge and I am also unable to turn the laptop on the power chord. Power adapter works fine (tested on another laptop). The laptop works fine on battery. I took it to a service center (not an authorized) and the guy told me the motherboard has a short circuit and needs to be replaced.

    I want to know if it is correct because the laptop works fine when using the battery. Unfortunately, the battery is dead so I can't use the laptop more. Would it be a problem with the DC Jack or a motherboard problem?

    Thank you.

    Yes, it is likely to be the CC which is a separate replaceable part much cheaper than a motherboard. I would certainly try a new plug before as I have assumed that it is the motherboard. Our links are low right now, but check in a day or two for the part number and advice where to buy it.

  • Card mother IDE ok for CD/DVD writer?

    Can I use the IDE controller of the motherboard for a CD/DVD burner?

    I build an ESX system with a motherboard ASUS P5QL Pro and know that integrated the SATA controller cannot be used to drive (I have a controller separated on order).

    Thank you!

    Yes, it works.

    See here: http://communities.vmware.com/thread/187762

  • Card mother MSI MS for my desktop HP 7930 (albacore)

    Where can I buy a new motherboard or ued for my desktop HP 7930 (albacore) MSI MS? Shame on junk food, because it is in good shape. Much thaniks

    Try eBay or Google like these for example:

    http://www.eBay.com.au/ITM/MSI-Ms-7093-HP-albacore-GL6E-motherboard-SKT-939-RS480-/140562867008

    http://www.serversupply.com/HP-Compaq/motherboard/desktop%20BOARD/albacore%20GL6E/PW636-69002.htm

  • Problem of card mother-suggestions

    I have a Desktop Pavilion p6310y and I lost my second mother. He has a Paragon M2N78 - motherboard and said that it is the only one that can be used on this computer. Does anyone know if there is another motherboard that can be used on this computer? It has a processor AMD 2.8 ghz and 6 GB of ram. I really want to buy a new computer, I just want to see if it can be resolved.

    For any help or suggestion would be appreciated.

    Bob

    Bob,

    Here are the specifications of your desktop HP Pavilion p6310y and its card mother M2N78-(Violet6). Please note that this model uses the 'VIOLET6' of the M2N78 - motherboard version and not several different version called M2N78 - LA. This model came from the factory with an AMD AM3 Athlon II X 4 630 and 6 GB memory DDR3.

    While you can replace the motherboard with a new one, Windows will become "not authentic" and you will need to purchase a new copy of Windows. Other problems that may arise,... include your recovery discs HP will no longer works, back plate I/O may not match, mounting motherboard can not align the studs, etc.. When installing a new copy of Windows, you will lose all 'value-added' original HP supplied with your computer software.

    If you're OK with every possible question of a motherboard out of factory usage, consider these cards mothers AMD AM3 + who is responsible for your AM3 Athlon II X 4 630 CPU and DDR3 memory.

    Please send Bravo

Maybe you are looking for