Pavilion g7: impossible to reinstall windows

I tried to reinstall my OS (IE. Window 7 Ultimate 64-bit), before installation, everything was successful but when I tried to select the readers whose windows are primarily installation it says "not found Drivers? What kind of driver he asked?

First of all, I think my windows installation disc is too bad so I tried in another laptop, but it works and entirely good finishing. If you help me? What is the problem I had in my laptop.

You can order materials from HP recovery below, or call HP on the phone to order 1-800-474-6836

http://support.HP.com/us-en/document/bph07143

If HP has more recovery media for your model, order them here

http://www.computersurgeons.com/default.aspx

.

With the help of a regular setup disk may not work due to lack of sata motherboard drivers.

Tags: Notebooks

Similar Questions

  • Impossible to reinstall windows 7

    OK so I have a VG245AA-ABU p6210uk HP-Pavilion and I'm trying to reinstall windows from 32 bit to 64 bit that it come with, now I can't access the original image on the D drive so it's on!

    As I have a copy of windows 7 home premium thought it would be easy just it pop in her driva and reboot, but hell no CV don't let you do it reads the disc and place at first but then it just sits there for like more than an hour to go back to square one I go and download a "copy" of the windows home premium and put it on a USB stick guess what Yep , you guessed nothing even that the DVD starts just the first part, and is like a puppy except for over an hour again!

    What I am doing wrong? Is it the motherboard?

    Help!


    Thank you very much

    John

    PS I don't know if this is the right place to post as I am almost ready to jack it and buy a dell

    commercial version sorry

    PROBLEM SOLVED

    It is indeed the monitor that was the problem!

    When I reinstall windows the monitor would fall that low if the screen went black - had to use an old monitor up to windows booted up then it was ok

    Thanks a lot for your help!

  • Toshiba Satellite click 2 Mini - impossible to reinstall Windows OS

    My toshiba mini right2 stopped working so I reset and tried to burn it all up even 10 and 8 to several usb drives windows to reinstall windows but when I boot in windows settings it does not I can't touch the screen to change the options or go forward using the key board.

    the reason why Ive been trying to reinstall windows is because when I get to the windows 10 setting screen I fit my WiFi settings and English then the pc says please wait a minute later the screen flashes black and it restarts and I have to enter the settings again I have reset several times the pc sent do reboot if I leave the Park to language select on-screen.

    Toshiba wants 80 pounds just to reinstall windows, but I don't know how they're going to do if I can't

    If you have re-installed Windows successfully, but when he starts at the 'first time' Settings Wizard, where you enter the name of the computer, the user name, the wifi settings, etc you can not use the touchscreen or keyboard? I had this problem before as well. If you have a new installation of Windows then the drivers for the keyboard and touch screen are not available. The only way around this is to plug in a USB keyboard. I don't remember exactly, but I do not think the USB full-size on the keyboard dock works until the driver is installed, so you may need to get an adapter USB On The Go, so you can plug a USB keyboard full size in on the Tablet microUSB port.

  • Portege A600-12O - impossible to reinstall Windows XP

    When reinstalling windows XP on Portege A600-12O, I get following error:
    Integrated HARD disk errors: the product recovery CD can not reinstall the operating system.

    As well, I try to install XP SP2 using Microsoft cd (.. .needless talk without success)...
    following error is flashed on the screen:
    A problem has been detected and windows has shut down to prevent damage to your computer.
    If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

    Hello

    In my opinion, the Toshiba Recovery disk error message is very interesting and says a lot. What do you think about this?

    If your HARD drive is defective, you need a new and you are not able to reinstall the OS. Maybe your HARD drive needs to be exchanged.

    In your case I would contact an authorized service provider. Technicians can check your laptop and if it of under warranty, you should get a new HARD drive for free.

    Welcome them

  • Impossible to reinstall Windows on Satellite A105-S2141

    I have a Toshiba Satellite A105-S2141 I'm trying to reinstall Windows on after a bad virus infection. When I entered the Windows CD (OEM cd, not original) and it loads all the drivers it BSOD PAge_Fault_In_Non_Paged_Area with 0 x 50.
    I ran several diagnostics hardware on the machine (memtest, hard drive tests, winstress) and nothing comes back bad. I put in a disk of Vista for sh * s and giggles and it loads fine.

    At this point, I think that it is a SATA driver that must be loaded with Windows. I can't find this driver anywhere
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1373531& rpn = PSAA5U & modelFilter = A105-S2141 & SelCategorie = 3 & selFamily = 1073768663

    There is the link to the support page for this model of laptop. I've also updated BIOS firmware to the latest version, I tried the BIOS driver loaded on a disk without result.
    I am really confused and this laptop is no good for me at the moment.

    And what version of Windows you want to install?

  • Satellite M35-S456: Impossible to reinstall WINDOWS!

    Laptop crashed and I am forced to reinstall windows using the recovery CD. When I put it in the drive and start the computer, it says that this will delete all your files F1 to continue or F2 to cancel. I press F1, then he said: press C to continue or has the demolition. I press C, and then immediately restart the laptop and begins the process of starting from the CD again and begin the installation again, its a never ending cycle.

    Help, please!

    Hello

    I agree with James. You suggested that your laptop has crashed. I guess that's the HARD disk head crash. In this case, there is nothing to see. The HARD drive is dead and you need a new.
    What you can do is to check the BIOS if the disc is recognized correctly.

  • Pavilion p6230y: how to reinstall Windows on a new hard drive

    Hello

    Recently, I had a hard drive failure. The drive is about 7 years so I understand he lived a life busy for a long time, and I plan replace it. Unfortunately, I wasn't able to make the recovery discs and I don't have a windows CD, because it is installed on the disk hard when I bought the computer. If I had to buy a new HARD drive, how would I reinstall Windows on it without re-purchase a copy? I was told there would be a product key on the chasis somewhere but I couldn't find the model and serial number for the bureau, nothing to do with Windows. I also searched HP website to see if I could order recovery disks, but this option is not visible anywhere. Help, please!

    Thank you, Alex.

    Alex, welcome to the forum.

    Unfortunately, because you did not the system recovery media when you bought the computer, you will need to buy a full copy of Windows 7.

    Here's a guide to help you try to order the HP discs.  However, I believe that it is very unlikely that they are always available from your computer is more than 7 years old.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Impossible to reinstall Windows on iMac 5 k (end of 2014) w / Fusion drive

    This past weekend, I had a problem with my Windows gel partition when running games, so I decided to reinstall completely the partition from the ground up. During installation, I keep running into this caveat that I can not go beyond: "we could not create a new partition or locate an existing one. For more information, see the Setup logs files. "I have made many things and suggestions to try to get installed it, but still continue to get that number. My computer is once more an iMac 5 k (end of 2014) with a merger of 3 TB drive. I had installed before, that's why I'm really irritated that I'm getting this question.

    Disconnect all the external storage and run the following two procedures.

    Reset the management system (SCM) controller on your Mac - Apple Support

    How to reset the NVRAM on your Mac - Apple Support

    Try Wizard BC and reinstall Windows.

  • Impossible to reinstall Windows XP error: BSOD STOP: 0X0000007E (0XC0000005, 0XF78DA208, OXF78D9F08)

    Original title: BSOD

    tried to reinstall windows xp bsod STOP: 0X0000007E, (0XC0000005, 0XF78DA208, OXF78D9F08 * pci.sys_address more numbers to several numbers and a date stamp.)

    Hello

    1. How are you trying to install?

    2 do you use a full version Windows Setup disc or the recovery disk?

    3. at what stage of installation you get the error message?

    I suggest you try the steps from the link below and check if it helps.

    http://support.Microsoft.com/kb/330182

    Additional information:

    How to fix a computer that does not start: http://windows.microsoft.com/en-US/windows-xp/help/setup/how-to-fix-computer-that-will-not-start

    Hope this information is useful.

  • Impossible to reinstall Windows Live Essentials

    I had to reinstall Windows XP Home, and now I can't reinstall Windows Live Essentials.  He tells me that I have, but I can't find the programs.  How can I get past this to reinstall the whole package and not only the toolbar and silverlight?

    Hello Nancy Forsythe-Gahan,.

    In addition to the information provided by Divya, you should post questions with Windows LIve products in Windows Live Help forum.
    Click on the link below to send it in the forums.
    http://windowslivehelp.com/product.aspx?ProductID=12

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Impossible to reinstall WIndows Xp professional

    I just got a virus today so I started to reinstall windows xp proffesional and I get the installation screen and its 39 minutes but then in this case I get a message saying "Journal of the installation system (Journal of setuprr of windows.". say that the signature for windows xp has no error code 800 b 0110 certificate is not valid for the application"

    Can someone please hellllpp it says something about the fatal error

    I tried to restart my computer, but I just need me to install again fails it please dumss

    Hello

    I suggest you follow the steps in the link: the installation program stops responding or displays an unrecoverable error message: http://support.microsoft.com/kb/811267

    Resettlement is the last step you follow to solve problems on your computer. Next time you come across questions related to the virus, you can run virus scan and check online if no malware or viruses detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

    NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  • Cannot start windows, impossible to reinstall windows, can't restore windows to the external hard drive or to an earlier point in time!

    I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

    If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

    If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

    Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

    If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

    If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

    If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

    I managed the Dell Factory Restore Image but that did nothing.

    And no, I can't reinstall windows.

    I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

    If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

    If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

    Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

    If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

    If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

    If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

    I managed the Dell Factory Restore Image but that did nothing.

    And no, I can't reinstall windows.

    Hey joeccash

    If you can not restore system reinstall windows etc you may have a hardware problem

    see if you can press F12 on startup to run dell diagnostics tools

    information on the dell below link

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

    and below dell link has the factory recovery information

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

    If this does not help, try dell or a reputable computer repair persom

    Walter, the time zone traveller

  • Impossible to reinstall windows after having disinfected disc

    Hello experts,

    I ran the disk on an elitebook8470p Sanitizer. She completed successfully, wiping everything as planned.

    Now I am trying to reinstall windows 7, using the "windows repair disc" I created with the hp utility.

    Problem is, there is no option to install windows 7.

    Just a bunch of options to repair, diagnose or reinstall from an image (but it has not listed to choose from images).

    Don't I have the wrong disc?

    Can someone share a list of steps to follow after disinfection drive contest?

    Thank you

    Hello

    The repair disk you mention does not contain the files to reinstall Windows 7, it simply provides a way to access recovery and diagnostic option etc.

    There are two options available.

    1. you can order the HP operating system recovery disc.

    Contact HP.

    2 another option that you might consider is to create your own Windows 7 installation disc.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc you using another PC - just download the good Disk Image ( that must be the same version that originally came with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a very respected source (Digital River).

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You will find additional and software drivers for your laptop here.

    Best regards

    DP - K

  • Impossible to reinstall windows 8 because they have not asked for the product key

    Hello I have a problem with reinstalling windows 8. After I clicked on install in the install Start menu, he directly windows configuration without request product keys or request for adjustment of the score. While she has put in place, he suddenly stopped and said that product keys do not correspond with windows image, something like that and asked to enter the key to product again. When I clicked OK, it just goes to the main menu. He never gave me a chance to key in my product key.

    What should I do now? Help me!

    8 Windows preinstalled on your computer or you bought Windows 8 separately?

    If your computer is pre-installed with Windows 8, you must use the recovery partition to reinstall.

    If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.

    To do this, follow these steps:

    · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

    · Click settings


    · Click change PC settings


    · Click general in the left column

    · In virtue remove all and reinstall Windows, click Start


    Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

  • Impossible to reinstall Windows 8

    Hi, I have recently built an ordered new computer and windows installation disc 8 with her. I bought a HARD drive with an SSD, so I installed it for the SSD. However I wanted to move my files user on my drive HARD then followed what this guy showed:

    However, when I did, after the reboot, I have been unable to sign and he said that he had no connection service. So I tried to reinstall Windows 8 to my computer from the disk, but I was unable to install it on one of my drives, SSD or HARD disk. I tried to format the two discs of the installer, but anything would work because it is in the wrong format.
    After Formatting disks, when I startup it gives me code error 0xc000000f and tells me to insert the installation media, so I did. But when I do it still does not work and it tells me this file: \WINDOWS\system32\winload.exe is missing. Could someone help me please? I tried searching everywhere online and I can't find all the solutions that work.

    I found the solution to my problem. All I had to do was remove the old partitions on my ssd, and then she could install Windows 8 on the drive.

Maybe you are looking for

  • Portege 30xx Win2K - need to bus master IDE driver

    Hello! Could not find the driver, tried all the sites of Toshiba. The works of 10 times slower than expected :(hard drive Help, please. Thank you. Best regardsVitaly

  • Dc7900: Hardware compatibility with HP DC7900

    Hello everyone. I have a question: I need to change the RAM and add a Video card in my PC Desktop DC7900. I already opened it, and saw that the RAM compatibility is as "with the hole in the middle of the RAM" So I guess it's DDR2 I have to buy. Do yo

  • How can I see my flag listed in Hotmail? He says that I I was 12 but it will only show.

    HOW CAN I SEE THE MY LISTD FLAGED IN HOTMAIL. ITS SAYS THAT I I HAVE 12 YEARS OLD BUT SHOWS ONLY 1 HOW CAN I SEE THE MY LISTD FLAGED IN HOTMAIL. ITS SAYS THAT I I HAVE 12 YEARS OLD BUT SHOWS ONLY 1

  • Itne updates

    Whenever I try to update I adjust I get an error code of 127. Someone at - it suggestions?

  • Miniature icon for video and Audio files

    Hi all For images, we can scale the image and use that as an icon and click on the icon, I can display the main Bitmap. Is it possible to do it for the creation of a kind of video/audio gallary of things? For Audio - I thought I can have the same ico