Pavilion HPE h8-1075uk can I run a gtx 960 on the IPISB-CH2 (Chicago)?

Similar Questions

• Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

  Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC?  I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

  Thank you!

  No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

  Rob

• I can't run an application downloaded from the Internet.

  Hello

  I downloaded "GoogleEarthSetup.exe" application, editor-Google Inc. Since internet using the browser "Chrome". Now, while I go to run it, I'll have a message: unknown Installer error. And I can not run the application. How to solve the problem. I'm waiting for your advice, please.

  Respectfully,.

  Solvemachine

  Most likely, the download is corrupted.  Have you tried to download it again?

  Unknown error installing means that Setup produced an error that windows did not recognize.

• ADF how can I run a parameter query when the page is displayed

  Hello
  I use web ADF 11 g
  I need to run a parameter query when the page is displayed
  Thank you

  protected DCIteratorBinding getItrtBindings (String binding) {}
  DCIteratorBinding outIterBinding is getBindingsForDCB () .findIteratorBinding (binding);.
  Return outIterBinding;
  }

  public DCBindingContainer getBindingsForDCB() {}
  If (this.bindings == null) {}
  FacesContext fc = FacesContext.getCurrentInstance ();
  This.Bindings = (DCBindingContainer) fc.getApplication (.evaluateExpressionGet(fc,"#{bindings}",DCBindingContainer.class));
  }
  return (DCBindingContainer) this.bindings;
  }

  BindingContainer links protected;

  public BindingContainer {} getBindings()

  Return this.bindings;
  }

  public void setBindings (links BindingContainer) {}
  This.Bindings = links;
  }

• How can I run two sequences simultaneously on the same object to measure

  I'm turning two sequences in parallel on even the UUT (own USE) so that I can put a piece of equipment to a certain State while starting a timer at the same time.  How can I do this in the sequencer teststand?

  You can run a sequence (or a subsequence if you just need a timer) in a new thread (just choose "use new thread" in the call of the sequence)

• HP solutions Center can not run because your installation of the device is not full (Windows 7)

  I downloaded and tried to install HP Photosmart C309a all-in-One Driver Software 14.0 Rel.5 in a new installation of Windows 7 Professional (not an upgrade). Installation works very well until the moment of the connection to the printer.

  I tried the wired and wireless network connections. The screen "Found network printers" lists the printer with the correct IP address and MAC address. Network Diagnostics screen shows any errors. The screen "Installation of your printer" poster "Detected printer", then says "printer setup has failed to complete." Retry does not help. Removing and reinstalling the software do not help.

  The Windows devices and printers control panel shows the printer as "Series of HP Photosmart C309a (redirect 2)". I am able to print a Test Page from Windows printer without error. The 'print options' are also available.

  The printer works fine with other computers on my home network, one running XP and a Vista running.

  How can I get the software installation to complete successfully and provide the printer the HP Solutions Center?

  Thanks for your help.

  Well, I have solved my problem. I'm not sure that these steps are necessary, but here's what I did.

  1 follow the instructions in "Completely uninstall and reinstall the HP software" HP. In particular, 'clear the temporary files and folders' and 'Disable Terminate and Stay Resident (TSR) programs and any other lighting programs' before reinstall you, then "Reactivate startup programs", after the reinstallation.

  2. install base drivers, and NOT the complete software package with applications.

  3. If the basic install works, then install ALL the applications (eg Solution Center). Do not try to install some applications but not others.

  4 remove the applications that you do not (e.g., Online Shop).

  Maybe the steps 2-4 are not mandatory, but they worked for me.

• How can I run an applet to access the camera to PC

  Hello
  I'm working on my thesis. I like topic - face recognition. Subjects must be identified in a webcam/PC camera, installed locally. I mean a USB camera. The application I developed so far is a web application and I have all the necessary code, access to the camera in Swing, in a JFrame.
  Even if I am not able to transfer this code to an applet to work inside my web application.
  I dug into it for a few weeks. The best result I got was an empty applet frame.
  Others reported different exceptions, missing as part of JMF, or (my best friend) classes of the applet class could not be found.
  The applet code I have is
  
  import java.applet.Applet;
  import impossible;
  to import java.awt.Dimension;
  import java.awt.event.ActionEvent;
  java.awt.event.ActionListener import;
  
  Import javax.media.Format;
  Import javax.media.Manager;
  Import javax.media.MediaLocator;
  Import javax.media.Player;
  Import javax.media.control.FormatControl;
  Import javax.media.format.VideoFormat;
  Import javax.media.protocol.CaptureDevice;
  Import javax.media.protocol.DataSource;
  to import javax.swing.JButton;
  to import javax.swing.JFrame;
  to import javax.swing.JPanel;
  
  
  SerializableAttribute public class WebcamSimpleApplet extends Applet {}
  /**
  *
  */
  private static final long serialVersionUID = 1 L;
  int width, height;
  
  public void init()
  {
  Super.init ();
  width = getSize () .width;
  height = getSize () .height;
  JFrame f = new JFrame();
  setSize (400, 300);
  f.setSize (500, 400);
  Add (f.getContentPane () .add (WebcamPlayer())) new;
  }
  }
  
  class WebcamPlayer extends JPanel implements ActionListener {
  
  /**
  *
  */
  private static final long serialVersionUID = 1 L;
  
  private static String PLAY_COMMAND = "play";
  private static String STOP_COMMAND = "stop";
  private static String EXIT_COMMAND = "exit";
  
  
  protected size imageSize = null;
  protected player player = null;
  DataSource ds = null;
  
  public WebcamPlayer () {}
  Super (new BorderLayout());
  System.out.println ("MyPlayer ()");
  getCam();
  createGUI();
  }
  
  public void getCam() {}
  try {}
  
  MediaLocator ml = new MediaLocator ("vfw:Microsoft WDM Capture of Image (Win32)" :/ / 0 ' ");
  DS = Manager.createDataSource (ml);
  requestFormatResolution (ds);
  Player = Manager.createRealizedPlayer (ds);
  
  
  } catch (Exception e) {}
  
  DS. Disconnect();
  Player.Close ();
  Player.DEALLOCATE ();
  
  e.printStackTrace ();
  } {Finally
  
  }
  } / / getCam
  
  Private Sub createGUI () {}
  
  If (player.getVisualComponent ()! = null)
  This.Add (Player.getVisualComponent (), BorderLayout.CENTER);
  
  Buttons
  Play JButton = new JButton (WebcamPlayer.PLAY_COMMAND);
  play.setBorderPainted (true);
  play.setBounds (1, 1, 20, 10);
  play.setActionCommand (PLAY_COMMAND);
  play.addActionListener (this);
  
  Stop JButton = new JButton (WebcamPlayer.STOP_COMMAND);
  stop.setBorderPainted (true);
  stop.setBounds (2, 1, 20, 10);
  stop.setActionCommand (STOP_COMMAND);
  stop.addActionListener (this);
  
  Exit JButton = new JButton (WebcamPlayer.EXIT_COMMAND);
  exit.setBorderPainted (true);
  exit.setBounds (3, 1, 20, 10);
  exit.setActionCommand (EXIT_COMMAND);
  exit.addActionListener (this);
  
  JPanel southPanel = new JPanel();
  southPanel.add (play);
  southPanel.add (stop);
  
  This.Add (southPanel, BorderLayout.SOUTH);
  
  this.setVisible (true);
  this.setSize (320, 240);
  }
  
  Private boolean requestFormatResolution (DataSource ds) {}
  If (ds instanceof CaptureDevice) {}
  [FormatControl] fcs = (ds) .getFormatControls () (CaptureDevice);
  for (FormatControl fc: fcs) {}
  The formats [] = (CF) .getSupportedFormats ((FormatControl));
  for (Format format: formats) {}
  If ((format instanceof VideoFormat)
  & & ((Format) .getSize () .getHeight () (VideoFormat) < = 240)
  (& & ((Format) .getSize () .getWidth () (VideoFormat) < = 320)) {}
  If (instanceof VideoFormat size) {}
  (CF) .setFormat (format) (FormatControl);
  imageSize = (format) .getSize () (VideoFormat);
  Returns true;
  }
  }
  }
  }
  }
  
  Returns false;
  }
  
  public void actionPerformed (ActionEvent e) {}
  
  If {(e.getActionCommand (.equalsIgnoreCase (EXIT_COMMAND)))
  System.out.println ("EXIT_COMMAND");
  free resources
  DS. Disconnect();
  Player.Close ();
  Player.DEALLOCATE ();
  Reader = null;
  System.Exit (0);
  }
  
  If (e.getActionCommand () .equalsIgnoreCase (PLAY_COMMAND)) {}
  System.out.println ("PLAY_COMMAND");
  Player.Start ();
  try {}
  Thread.currentThread ();
  delay in the initialization process
  Thread.Sleep (1000);
  
  } catch (InterruptedException e1) {}
  Generative TODO catch block
  E1. PrintStackTrace();
  }
  }
  
  If (e.getActionCommand () .equalsIgnoreCase (STOP_COMMAND)) {}
  
  System.out.println ("STOP_COMMAND");
  Player.Stop ();
  }
  
  }
  }
  
  and works fine if I run it in Eclipse-> run as a Java applet.
  
  The question is:
  Could you point me to a good tutorial or show me something not working?
  I will really appreciate if you can give something for Dummies or non-cerveau webcam Java applet programmer.
  
  Thank you

  user985724 wrote:
  Well, I got it. But I will REALLY appreciate any advice.

  You said earlier "I know I should package the applet into a jar file and the sign, but I have not yet had no chance." which means you try running it without signing (which is strange since you posted this in the forum "Signed Applets" which implies that you know that you have to sign). You must sign the Applet, if any Jo will be able to run it without making any configuration changes that will be detrimental to the overall security of his computer and you can register only jar files and not unique class files. So my advice - spend some time to learn about how in the container of your Applet and how to sign the jar file.

  P.S. for test purposes you can "auto sign."

• Pavilion 510-p127c: I can install an additional hard drive in the model 510-p127c

  Is there a space to install a second hard drive for storage in the PC?

  There are only 2 Sata Headers (for devices) on the motherboard.

  The only solution would be a USB3.0 external hard drive.

• Order the new HP Pavilion HPE h9t gaming desktop PC but no support page to the top?

  Hello

  I ordered a customized version featuring the core i7 2600 processor. I wanted to read on the computer and get the information about it. I don't even see a page of the driver for it. When the page is setup or made public? Product # A5U33AV

  Thanks a lot for your comments. I'll pass your comments to the relevant team. Please check the page in 3-4 business days.

• HP Pavilion p7 - 1519c: compatibility of the Gtx 960 in a Hp Pavilion p7 - 1519c

  A friend of mine was looking for a put a new power supply and a 960 6.8 inch gtx graphics card in its current PC (Hp Pavilion p7 - 1519c). We are a bit concerned after reading this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/Pavilion-HPE-H8-1075uk-can-I-run-a-GTX-960-on-the-IPIS...

  We believe that his computer was purchased around mid 2013 (late June). We wondered if this can possibly be a problem. Two other problems, we have considered are the need for a new power supply and cooling of questions possible. Is there anything else we should be weary of? Are there other other concerns?

  Thank you for your time!

  Rumils, welcome to the forum.

  First of all, the link you provided does not work.

  Your computer has UEFI and the 960 GTX requires UEFI in the motherboard.  However, you will need a new power supply (PSU).  The current PSU is only 300W.  The GTX 960 requires a minimum of 400 w to work properly.  It may also be too long to fit in the space provided.  Although I have had members say he did not.

  To save you a lot of problems, I suggest you contact the Technical Support of the manufacturer to ensure it will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Processor and fun of rear cooling fan runs at full speed on Pavilion HPE h8-1120it

  Hello, since yesterday when I turned on my HPE h8-1120it HP Pavilion the CPU fan and rear fun cooling are always rotating at high speed, and they never stop. I have nothing no hardware changes, no change in software. Two days I will I work all day without problem, I turn off as usual the PC, I'm going to bed and then yesterday morning I turned on and now I have this problem. The PC is brand new (I bougth it about 1 month ago). There is no problem of temperature (now I 19 ° C on my computer room).

  Read another similar post I figured might be a bios problem. The version of the bios is 7.11, I tried to see if there is an update of canno't ' t there, but I find an update of the bios for Pavilion HPE h8-1120it.

  I burned a CD with the hardware HP Vision Diagnostic and I run the pleasure of tests and they all passes. During these tests, the pleasure seem to achieve the right speed in the progress of the test.

  I noticed this strange thing: when I bought the PC I immediately activated in the bios the use of VT to use hardeware virtualization with VMWare player. Yesterday, I found this setting changed and disabled and it's very strange because I did not change the values in the bios.

  What can I do? The noise of the fans at full speed is impressive, that I can't work on these conditions!

  Thank you

  Davide Angeli

  Hello

  There are not many fans rated at 4 000 rpm. With this type of fan RPM coupled with your observation that VT missing then your PC seems to have a problem.

  Maybe it's time to contact the HP Support.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• HP Pavilion HPE h8-1111: Deffective WLAN Card

  I've had a few confusing issues with my internet connection for a few weeks now:

  My computer seems to detect wifi networks (they appear in the Network Manager), but fails to connect because of an unknown factor.

  Basic troubleshooting informed me that wifi wasn't the issue (other devices could connect to) and it turns out that my computer could sometimes reconnect by mmee after a few hours (weird right?)

  This time it does not resolve itself. I tried to update my WLAN card through my laptop adapter, so the drivers via a USB key. Nothing worked (maybe bad drivers?) I've tried a few)

  My network card is a mini Broadcom 802.11n using magnetic antennas of the card. (youd cloth found in a laptop essentially...) I have little or no knowledge more than I could translate from the web on this kind of hard\software. I am at a loss.

  [Also, I've seen a few threads recommending the driver intel update of software, but it needs a connection to work its magic...]

  Hi @arnaud34,
  
  Welcome to the Forums of HP Support! I understand that you have problems with your wireless connection and I'm happy to help you.

  Is that something WLAN adapter that you added or the original map?

  The Support page and drivers for your computer model: PC desktop HP Pavilion HPE h8-1111

  I would recommend that you try the following to see if you can get a stable connection. If at the end you still have nothing so it may be that the card is bad, and a replacement is necessary.

  Troubleshooting your wireless network and Internet access (Windows 7)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion HPE 440F: need new video card for HPE-440F

  Salvation;

  The ATI Radeon HD 5570 in my Pavilion HPE 440F appears to be dead, or is doing. The fan has stopped working and I think the map has overheated.

  I'm running Windows 7 x 64.

  Anyway - I would like to install a new card - and best video. It is, since it is HP, I bet that not all cards are compatible with my system.

  For example, I can buy an ATI Radeon SR-290, which gets much higher than my current card pass mark. Or maybe even a NVidia card might be a better value for the money.

  Can someone point me to a list of compatible video cards for my system?

  Thank you

  Ubuntu_Kid

  p.s. My Linux box is not an HP.

  Ubuntu_Kid, welcome to the forum.

  The problem you are having is, most of the newer video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on August 26, 2010.

  Some of the manufacturers have developed a VBIOS that will allow their cards to work with legacy BIOS.  I know that the EVGA has done with some of their cards.  I suggest to call their Tech Support (1888-880-3842) to see if they have a card that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Need drivers for my new HP Pavilion HPE ethernet

  Hello, I just bought a new HP Pavilion HPE desktop computer (3 days).  After that I got the first time I turned it on it only connected via the wireless network card.  I then did a clean install of windows 7 Ultimate edition (because I had it and it's better than home premium).  Well I can connect through the wireless card but want to connect with the ethernet.  The Device Manager shows SM Bus controller and Ethernet controller drivers are not installed.  I contacted HP support and they could not help, they said I have to do a full install HP operating system provided with the computer because they knew not where were pilots and no guarantee that would work.  The motherboard is made by IPMMB-FM.  I tried Google and found nothing.  I'm looking for help to find these drivers.  I'd appreciate any help that is offered.

  Possible breakthrough...

  While HP does not seem the W7 64-bit driver available (small oversite on their part), I think I have found a driver on the Atheros website.

  Go to the Portal client Atheros and select AR813x_AR815x_v2.0.14.15_WHQL or AR816x_v2.0.14.15_WHQL under the headings AR813x_AR815x or AR816x. They are in. RAR format, extract the driver by using WinRAR or similar!

  Frank

• Pavilion HPE model # H8 - 1260t: no sound

  Soundstopped work.  Through trouble shooting steps and even bought new speakers without success. I would be grateful if anyone has any ideas.  Thank you

  Hello @easylh,

  I understand that you are having problems with your audio files on your desktop computer HP Pavilion HPE h8 - 1260 t CTO running Windows 7. I'm providiing you with an HP support document: use of the Recovery Manager to restore the software and drivers (Windows 7), which will guide you through the process of re - install the original supplied with your computer drivers. As we know it worked they should solve your problem. If, however, they do not resolve your problem, I think that, since you already troubleshoot-made audio that we make a backup of your data files and perform a factory recovery on your computer.

  To save your personal information and ensure it is not lost, I would like you to look at and follow the steps in the HP Support document: backup of files (Windows 7), who will be your personal files are up to date.

  CAVEAT! If you want to keep the e-mails or bookmarks/favorites that you want to save them as I do not think they are saved in the backup HP process.

  Then, I would like to see again you and follow the steps in the HP Support document: performing a recovery of HP (Windows 7) system, which will allow you through to get your computer back to factory settings.

  IMPORTANT - your staff of files such as libraries, personalization settings, user accounts and desktop themes are permanently deleted. The settings on the computer are returned for values by default (as it was when it came from the factory). All applications and software installed on the computer when it came from the factory are relocated, and their settings are reset to the default values. In addition, software, applications, programs, and everything you have installed or saved on the computer are deleted permanently.

  If the steps above did not resolve your problem please contact our technical service at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. ' http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html '

  I want to thank you for display on the HP Forums. Have a great day!