Pavilion laptop g6 - Wifi problem after upgrade to 8.1 Windows

Similar Questions

• Intermittent WiFi problem after upgrade to Windows 10

  My acer aspire V3 - 571 has been intermittently lose WiFi for the last 2 days since Windows 10 Windows 7 Home Premium upgrade.

  The Aspire has:

  Driver Atheros wireless network adapt AR5BWB222 10.0.0.38 Wednesday 2/15/12

  So far, I have:

  1. in the properties Atheros AR5BWB222 Wireless Network Adapter, I unchecked the box in the tab property management who read allow the computer to turn off this device to save power.

  1B. Made sure flight mode was in the off position.

  1 c. Forget exactly where I did, but made certain settings in another? location have been set to "Maximum Performance".

  2. check that the firmware is updated on my network router, the value 2 of WPA - PSK (AES) security.

  3. search through many forums to read the responses of people upgrading Windows 10 WiFi issues - seems it is a widespread problem, although no one said that the WiFi signal loss was intermittent, as is my laptop. Shots of the Internet for my research also shows WiFi problems occurred in the past for installation of Windows 8. (So far have not come across mentions of WiFi problems for the latest installations of Windows 7).

  4. in exploring my laptop, I came across a page of Microsoft Updates - SEE ATTACHED. I was surprised to find that these updates go out quite frequently during the day. For example, 10 separate updates between 23:30 and 16:24 on August 1 and 18 separate updates between 12 h 06 at 15:57 on August 2.  Included in the record of updates for August 1 and August 2. I am aware that Microsoft uses my WiFi to download updates AUTOMATICALLY. It is possible that this intermittent intermittent interruptions of the WiFi update download?

  5. this afternoon, when the WiFi did not work for Windows 10. I reinstalled as a dual boot Ubuntu 14.04. I have had no trouble to connect to the WiFi for Ubuntu.

  Not yet:

  1. I haven't tried connecting the laptop via an Ethernet cable to my router during one of these WiFi failure.

  2. my ISP is a VOIP/Internet, using a Westell and a single Cisco router configuration. I have not taken into account if they can be a cause of the problem.

  3. I read on a forum that someone corrected their problem with WiFi connection by changing their setting include TKIP security router

  NOTE: I need to put Windows screenshot attachment 10 updates in a response email separate to this post as this post does not accept the attachment.

  Would appreciate your comments and suggestions. Thanks in advance.

  I'll probably also put this on a Windows 10 forum elsewhere.

  Hello!

  FYI, this has worked for me, finally a solution!

  The strangest thing - I have uninstalled the driver Atheros. Do NOT reinstall it. After uninstalling the driver Atheros, a right screen Windows 10 panel immediately appeared style - either on advice of Panel or in the page settings of WiFi, was asleep, can't remember which - that contains an entry box marked my wifi password. I entered the password and boom, the wifi worked. He has been since.

  Once again thank you. Mark resolved.

• WiFi problem after upgrade to Windows 10

  Greetings!

  I read a few posts on WiFi problems after the (improper) upgrade of Windows 10. I have a ThnkPad T530 which I've upgraded to Windows 10 Windows 7 in September (too late to roll back). Here's my question:

  I have three computers on my desk. This standard T530 running Windows 10, a ThnkPad E555 running Windows 7 and a Dell running Windows 8. I used all three last Friday. I installed Norton on all three Friday and everything went without a hitch. When I first started their return to the top of this morning, the two others came online as usual. The ThinkPad T530 connected by a router in the company, but has no access to the internet. I can connect to the hotspot on my phone and it connects fine. I tried to turn the WiFi connection and then turn it on again, restart, by killing and restarting the business connection, etc. Nothing changes.

  Help, please

  Ben

  Try the following:

  Open administrator command prompt:
  http://winaero.com/blog/how-to-open-elevated-command-prompt-in-Windows-10/

  Then, run this command:
  netsh int ip reset c:\resetlog.txt

• K3 Note Wifi problem after upgrade to the marshmallow

  Guys, after upgradation of Marshmallow in k3 note, there arise a problem of wifi, it just dropeout every minute like connect for 1-2 seconds and disconnect then automatic...
  If someone knows how to fix this please tell me... I have hard reset my phone but the problem is not solved... so please tell me the solution

  Note from the admin; phone added to the subject type

  
  

• WiFi problem after upgrade to OS 10.11.2

  Hello

  I have a MBP 2010 I installed OS 10.11.2 yesterday because it was supposed to improve the performance of the wifi.

  Since my update the MBP does not see any network wifi more so that all of the other ipad and iphone at home are connected.

  I don't know how to activate the wifi to work again.

  Thank you for your help

  You have restarted your Mac since the upgrade? If this is not the case, try this, because sometimes a reboot solves things.

  You can also try a reset of the PRAM.

  If none of the above work:

  Try to turn WiFi off tension, and then back on... Or...

  Attempt to remove networks that you have connected to in System Preferences/network/WiFi/Advanced button/Preferred Networks. Then see if you are able to connect to a network... Or...

  Finally to try: System/Network Preferences, remove the entry from WiFi by selecting it in the networks list and clicking on the sign less . You may need to open the Panel with an administrator account and password. Then add the WiFi network, by clicking on the plus sign by selecting from the drop-down list WiFi Interface .

• Solve WiFi problems after upgraded 9.3

  After installing iOS 9.3 on my mini iPad, the device could not connect to my Airport network.

  The busy light was all the time spinnig, but the connection never got established.

  I could press the i key to display the IP etc but all entries were completely empty.

  I have zero network and turn on the unit and goes out, but not had any luck.

  I then abandoned static DHCP and all typed manually and suddenly everything started working, the busy flag disappeared and the symbol of a Wi - Fi connection appeared in the status bar!

  This seems to be a good workaround for now, maybe someone finds it useful.

  To close!

• Many problems after upgrade to 8.1 Windows

  I just upgraded my HP Pavilion g6 computer 2301AX laptop with Windows 8.1 unilingual. After that, I am confronted with these problems:

  1. the fan continues to run like hell, even in an inactive state.

  2. laptop got sluggish.

  3. F12 key was still on white despite Airplane mode is active or inactive (WiFi and Bluetooth are working very well and are consistent with the airplane mode).

  Help!

  have you downloaded the driver from the authentic website (AMD or whatever your brand of graphics card)?

• Problems after upgrade to 8.1 Windows

  my laptop had windows 8 and Microsoft upgrade to 8.1, when automatic updates took place all froze on startup/sign-in page.  then it went blank and restored to win 8 except that there are problems. now it is stuck on high contrast that nothing will stop him. I contacted M S helpline and was told that I have to pay 159.00 for repair. can someone please?

  Hello

  Check with the manufacturer of the system, their drivers and documentation support online and ask
  their forums (if any) about known problems. Some portable computers cannot be upgraded to Windows 8. 1.

  Update the BIOS, drivers low-level chipset and drivers of major on-board and separate devices.
  Especially update the video driver.

  -----------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (video/driver update, BIOS, the)
  pilots of the chipset and the other major engines)

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names (and BIOS and chipset).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8 - why isn't Windows find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite L50 - A - 16 Q - problems after upgrade to 8.1 windows

  Hi all

  I have a problem with my Toshiba Satellite L50 - A - 16 Q.

  I decided to update my laptop to Windows 8.1 Win8, unfortunately, it was really bad decision.
  After that my computer is very slow. It takes forever to push the power button to be ready to use browser. Even Chrome does not work correctly. Before the update, my computer was big, fast and stable.

  Is there anyone who had simillar problem? Is it possible to go back to Windows 8 without destroying my C: drive?
  Maybe I should install something more?
  All drivers or another update?

  I just install Win 8.1 update and nvidia drivers graphics.

  Hello

  To be honest, I put t understand the decision to return to Win 8.
  Win 8 contained many bugs that have been fixed with Win 8.1

  Two days ago, I upgraded my new Satellite M50 - A Win Win 8 to 8.1.
  It took some time but finally win 8.1 run on my laptop and its great!

  First of all, you must update the 8 8.1 Win win recommendation of Toshiba:
  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/
  All Toshiba drivers, utility tools must be updated!

  With regard to the starting time:
  You know the hybrid mode? Default (Win 8) did not stop you probably know other systems like Win 7 offshore. The 8 winning performed the closed hybrid that allows you to boot up the laptop faster. But this has been closed not real mode.

  Here is a good description how toggle this mode:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

• Split x Touchpad 2-problem after upgrade to 8.1 Windows

  Hello

  I bought this Split x 2 a week ago and it came with WIndows 8. Everything worked great until I upgraded to WIndows 8.1. Now my Touchpad freezes a few times and I have to sign out and then sign back in to my profile to unlock the touchpad sometimes I can get it to unlock by resetting the version touch screen buttom.

  I called HP customer service and they said it was a matter of Microsoft and transfer me to them. Microsoft said that it was a hardware issue (HP) and that I had to return to the store where I bought it.
  (BestBuy). I took it yesterday at BestBuy and they gave me a knew one. I did the same thing and upgraded to Windows 8.1 and questions of touchpad is back. So fairly sure is not a hardware problem.

  All windows updates are completed

  I checked the Touchpad Driver and it is up-to-date.

  NOTE: I plugged a wireless mouse for my laptop and when the touchpad freezes wireless mouse still works.

  Does anyone know a fix for this problem? Everything else works fine on the laptop is just very annoying when you work and you need to close the session to get your touchpat to work again.

  Any help would appreaciate it.

  Jhon C

  It worked for me.

  Go to the Generic USB (two of them) hub in Device Manager.

  Go to the power management tab

  Uncheck the box allowing the computer to turn off this device to save power.

  Turn it back on.

  My touchpad stopped everything by searching for a solution on this forum. I have 'unchecked' boxes and the touchpad are property to life before the reboot. He has worked since then. (three days)

• Printing problem after upgrade HP solutions Center / windows 7

  Hello everyone,

  Since I've updated my PC for windows 7 (and a new version of the HP Solution Center), I can print is no longer any document (the only way to get something out of the printer, print a test through the solution Center page).  Communication is Ok (correct ink levels etc.).  Printed materials appear in the print queue, and then disappear as if they are printed, but nothing is (no error message).

  I have Windows 7 Home premium, to C5180 all-in-one USB connection.

  I already tried the HP diagnostic program and uninstall / reinstall.

  Any suggestion is welcome.

  Thank you!

  I would like you to try this.  Unplug the usb cable from the printer and uninstall the printer software.  Then go to this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&lc=en&cc=us&dlc=en&lang=en&cc=us select 32 or 64 bit and install this "HP Print fix software when upgrading Vista to Windows 7" then reinstall your WIndows 7 software for this printing.  Let me know if this solves your problem

• acing hard drive problem after upgrade to 8.1 windows

  Mr President I upgraded my hp envy j048tx to windows 8.1 and have updated all my drivers using HP support assiastant... so when I apply a right click on any file... its takes time to open the contextual menu... long u please you suggest?

  Hi Vira_Bathwar, welcome to the Forums of HP. The right-click menu is also known as the "context Menu". This can accumulate and get cluttered over time, causing it to be slower. The other possibility is system performance issues. I found a similar thread with a few suggestions that have worked for other people know this symtom. See this thread Microsoft: do a right-click context menu in desktop appearing slow victory 8.1

• HP Pavilion 15 laptop: DVD not recognized after upgrade to W10 player

  Yesterday, I upgraded from Windows 8.1 for Windows 10 on my Hp Pavilion Notebook PC. However, the DVD player is most recognized, and I can't play CDs or DVDs. The DVD drive is hp CDDVW SU-208FB SATA CdRom Device.

  Anyone who can help me?

  I also tried to upgrad an old laptop pavilion of w7 HP to w10. The Graphic was not compatible, the connection to my rooter broke. I went to w7. Today, one of my friends who has an almost new Asus laptop had several problems after the installation of the w10. He returned to w8.1.

• Latitude E5520 Audio problems after upgrade to win 10

  I have audio problems after upgrade to win 10 64-bit.

  Dell Latitude E5520 IDT 92HDxxx HD Audio
  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

  (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

  I would be happy to provide more information and help to debug.

  To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

  *************************************************************************
  Hello
  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows. Check their documentation online with Dell Support, and
  drivers and ask questions in the forums about known problems. Make sure that you are
  Run the latest version of the BIOS, chipset and drivers.
  I hope this helps.
  *************************************************************************

  I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  Thank you
  John D.

  johnsdagg

  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows.

  Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

  johnsdagg

  I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

  johnsdagg

  If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.