Pavilion p6 - 2120t: Windows will not start with the new graphics card

Similar Questions

• Does not start with the new graphics card

  Hello. I have a P7-1058uk Pavilion Cleveland-GL8 motherboard with integrated graphics.

  I bought a new monitor that has resolution 2560 x 1440, equal the integrated graphics card can face if tried to to level with a Gigabyte GT630 card.

  When I start, I have now the chance to the blue HP screen but not more details. If I start with F10 or ESC key, I get a black screen instead. Whatever it is, I am asked to press ESC to enter in the start, but by pressing on the button has no effect and the computer just hangs. There is a cycle repeated very quiet click that sounds like the disk drive HARD trying to start then stop

  If I remove the graphics card and connect the monitor to the integrated graphics card then all's well again (but limited to the resolution 1920 x 1080).

  Perhaps foolishly, I assumed it was a problem with the residual power (300W) and not enough punch power to run the HARD drive. But who, after having upgraded to 650W it makes no difference. I also tried to download the NVidia drivers but it won't let me install because I can't get the computer to work without the graphics card and Nvidia install it because it cannot detect the hardware.

  Any ideas/help would be appreciated.

  Andrew

  You can have one of these motherboards that are not happy with NVIDIA graphics cards.

  This may sound a little weird, but it happens.

  The other possibility is that you have damaged your home x - 16 PCI Express by installing a map requiring more that the installed power supply has been able to provide.

  Kind regards

  ERICO

• Computer does not start with the new video card

  Hello

  I have hp pavilion 500-277cb and I love it, but it won't work with my new video card

  The video card is
  Sapphire ATI over-pants 2460

  I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.

  It seems to me to have the latest version of the bios and windows 8

  What can I do else?

  Thank you very much

  Best,

  Korhan

  Hi JM,

  Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?

  Your PC comes with one of the following built-in Intel graphics drivers:

  • Graphics Intel HD 4400 (GT2)

• HP PAVILION HPE h8-1192d: could not start after installing new graphics card

  I recently bought a Gigabyte GTX 750 Ti Black Edition to replace my old. But it will not start after installing on my h8-1192d, and stuck on the screen flash hp. Help, please!

  Hello

  NVIDIA GTX 7xx or 9xx series graphics cards will not work in your PC.  The BIOS in "chicago" mothererboard is not compatible with the video BIOS in the graphics card.  You will need to get an older card chart such as the one of the below listed OEM HP graphics cards. Depending on the graphics card, you may need to replace the power suplly.

  

• Workstation XW4300: xw4300 will not work with the recommended graphics card (Nvidia Quadro FX 3400)

  I installed a graphics card hoping to update my computer.  The Nvidia Quadro FX 3400 was the highest assigned

  graphics card recommended for the workstation xw4300 system HP specifications page.  My system

  has a 460W power supply and I connected the cable 6-pin on the map and the map pins in the PCIe x 16 slot where

  the old card was.

  When I turned on the machine, I don't have even get a bios message or welcome screen.  All black.  But on all 10

  seconds, the power would cycle off and then come back.  HP says that this map is supposed to work with my machine!

  This card appears, making it non-functional.

  Any ideas?

  I ended up going with the Nvidia Quadro FX 1400 card.  He is listed as 75W and the map of 'medium' recommended for this xw4300 system.  I paid 10 dollars for it on eBay and it works great.  Do not use the Quadro FX 3400 map even if it is recommended by HP for this machine.  Food can't support.

  A witch hunt.  Equipment old and new software don't always play nice.  My machine has a new installation of Windows 7 Pro 64 bit on it, and running Windows Experience Index gives me the blue screen of death.  I put a meter on the power during the test problems... No..  It's a kind of driver incompatibility.  Win 7 says that the driver is the last, but he chokes on the

  test the index.  Funny irony is that I ran other tests which include benchmarking 3D rendering and nothing, but the Microsoft Windows Experience Index test stifles this card.  How about you do not run the Microsoft test to improve my Windows experience.  :/  Go figure.

  This card is older hardware, and because of that I don't have hope than Nvidia or Microsoft to make Windows experience test runs correctly with win7 64 OS.  Sounds like HP.

  Here's the kudo: the guy on eBay who I bought the card quickly refunded my money when he learned about the Blue error screen of death in Windows performance index test, so I did a free card.  I'll send her money

  Back to him.  I've never met anyone so accommodating.  These companies could take a lesson from that on what customer service means.  That's how you get regular customers.

• Lenovo M91p desktop does not boot with the new graphics card (Blank don't screen no BIOS)

  Hi all

  I recently bought a Lenovo M91p thinkcenter Desktop as an upgrade to my old PC i3.

  Old Spec is as follows:

  • Coolermaster Thunder 600W power supply
  • Card mother Intel DH55HC
  • Processor i3
  • Graphics HIS HD Radeon 7950
  • 8 GB RAM
  • HARD DRIVE 500 GB

  I transferred my HD supply and Power 500 GB old to new Lenovo desktop and everything starts very well.

  Then I installed 2 x 2 GB extra in the Lenovo M91p (which in fact 8GB) and updated the disk of 500 GB to 1 TB.

  So my new spec is as follows:

  • Coolermaster Thunder 600W power supply
  • Card mother Lenovo Q67
  • I7 2600 3.4 Ghz CPU
  • 8 GB RAM
  • 1 to and 500 GB HARD drive

  Everything Booted fine. Then I tried to install my old graphics (HIS 7950 graphics Radeon HD card) card. I got was a blank screen, no beeps, no BIOS... Nothing.

  At first, I thought that my diet was not enough... So I tested a 750W power supply in the pc. Still nothing.

  Then I thought that the motherboards BIOS was outdated... Updated... Still nothing. I even tried to update the firmware of the graphics card. Nothing.

  The graphics card works because I tested it in my old machine and it worked 100%.

  However, I took my graphics card to my provider and he tests it on another of his pieces... Did not work there either.

  My PC BIOS is not supported for secure boot, in case anyone wants to know.

  I am out of ideas now... Anyone able to help?

  There is a white list of graphics cards that will recognize the BIOS. The 7950 HD is a map of 180w, well beyond what the power plant can provide (and case/sufficient cooling fans for) and not a single one is that Lenovo would provide support for the BIOS.

  Use the search engine above to see what cards other owners have used successfully in their M91p.

• 13 elements will not work with the new camera, it will not be updated raw 8.7.1

  13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

  Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

• Windows does not start with the second internal HDD connected

  Hi all, I recently got around a few major problems with a new buuild, but I found another issue. Windows does not start with my connected storage disk.

  hard drive 500 GB of important data that I can't save on it and need access. It is a hitachi drive, which works fine on other systems but usually works in this one. any suggestions are appreciated, thanks in advance

  fixed the problem of swapping of sata ports and reconnect the cables, thanks for the advice but

• Windows will not start because the following file is missing or corrupt < root windows > < hal.dll windows >

  When I turn on my PC a black screen appears for about 5 minutes, then the following message: Windows could not start because the following file is missing or corrupt I can not any more access to the computer and having to turn it off.

  Hello

  I suggest that you follow the steps described in the links below and check if they help to resolve the issue.

  Link 1:

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  Link 2:

  IF the steps in the link 1 does not work, check the steps in the link below.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• computer will not start with the disc

  I use vista and my computer does not start because of a corrupted file.

  I put my vista disk in such suggested, but the screen does not move any command of keys to press and just goes round in a loop. So I can't the computer to start and fix.

  I changed the bios to boot from the cd as first choice but still no results.

  can anyone help?

  Could it be that the disk driver does not work like the disk isn't loading? Or the disc will not load because the press any key order is not coming?

  I am old enough and not very technically experienced but this computer has served me well and I have a lot of information that I need to go down there if I have to buy another.

  Any help would be greatly appreciated.

  If you have correctly setting the boot order in the BIOS to CD/DVD first, and the computer does not start, your problem has nothing to do with the driver for the CD/DVD drive. Also running in safe mode or SFC can maybe help you.

  The reason that pilots, safe mode and FCS can help you is the same for all three: boot (if from the hard drive or a CD or DVD) takes place before loading Windows. If it boots from a CD or a bootable DVD, the problem has nothing to do with Windows. It's a hardware problem. I don't know what the problem is, but it is possible that the CD/DVD drive is dead.

  What is wrong can but fixable, but whether it is cost-effective to do so is another matter. It depends on what the problem is. If the CD/DVD player, they are inexpensive, so replacement should not be expensive. Fortunately, it's not like there is a problem with the hard drive, so even if you buy a new computer, you must be able to remove the hard drive from the old computer, put it in an external enclosure and to transfer the data to the new computer.

  Let me add another point: you say "I have a lot of information that I need to get off it if I have to buy another." This suggests that you don't regularly back up your data on an external support. If this is the case, you've played with fire. It is always possible that a hard disk crash, the user error, close to love at first sight, virus attack, even stolen computer, can result in the loss of everything on your drive. As it has often been said, it is not a question of whether you will have a problem, but when.

• Windows will not install on the new drive for HP Pavilion Elite m9510f

  I have a HP Pavilion Elite m9510f operation with Windows Vista Home Premium 64 - bit SP1 and with a Seagate Barracuda 7200.11 HDD of 750 GB.

  The HARD drive broke down a few weeks ago and is unrecoverable.

  I bought Seagate 1 TB hard drive to replace the 750Go again and used the HP recovery discs provided by HP to wipe the disk and reinstall Windows on it.

  I can run all the recovery discs 3 without problem, the computer goes through its paces to reinstall Windows and all of a sudden, the computer stops and I get the message "installing Windows could not configure Windows to run on a hardware on this computer."

  What is happening with this?  I use a HARD drive with recovery disks provided by HP.

  HARD drive replacement need to be 750Go like the original?

  Any help would be appreciated

  Probably a problem with the hard drive being the new type of AF. Windows 7 with SP1 should work better than Vista... but your Vista key will not work with ISO download linked above.

• Windows will not start since the update :( Help, please

  Windows could not start. a recent hardware or software change might be the problem

  file\windows\system32\config\system
  status: 0xc00000e9

  When I try to start the system restart that nothing happens

  When I try to restore the computer to factory settings it says that the necessary files are not there.

  My computer was working fine until I installed an automatic update from microsoft. Help, please

  For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
  This isn't their recovery process, Microsoft.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 does not start with the new msi motherboard

  Yesterday, I bought a new motherboard, processor and 8g of ram in my computer. After all what adjustment and replacement of my old motherboard with the new, I started my computer to find that Windows 7 unbootable not. Instead of windows 7, I get the screen click on BIOS II (2). The configuration screen allows me to launch Winki but not Windows 7 because it was not found. The motherboard came with a utility disk drivers msi and AMD chipset which, when inserted in my hard disk, loads up to Winki. This version of windows 7 (Home Premium 64-bit) came pre-installed with my old mother/computer(Thus, I do not have the windows 7 installation disk) card. Is there a way I need to activate Windows 7 on my new motherboard?

  Hello

  Well, you have some problems. First of all, with a new motherboard you need a new copy of Windows - not only the DVD, but a whole new product key must be purchased. It's just the terms of the license: a new motherboard is equivalent to a new computer, and each computer must have its own copy of Windows.

  So where you buy your copy of Windows 7, I would make sure that it came with a DVD image. Otherwise, you can tell us which version of Windows 7 you (will) actually buy, and we can send you a link to the copy of the DVD for this version of Windows 7.

  To purchase a copy of Windows 7 you can check Newegg.com, here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=windows+7&N=-1&isNodeId=1 .

  I hope that answers your question.

  Kind regards

  BearPup

• HP DV6 3103 sl-do not start with the new RAM

  Hello

  I have a Hp Pavilion DV6 3103sl with a dual boot W7 - W7,

  I don't want to update the 8 GB RAM, and here's the problem:

  I tried to add a new Corsair 4 GB of RAM for 4 GB samsung which is already there, it did not work.

  so I thought that there was a problem of compatibility RAM of coupling of different brands and

  I tried to use the Corsair only: it didn't work again.

  Long story short, I tried two different 4 Go Corsair-1 Kingston 4 GB 1333 Mhz 10600

  I tried alone without the RAM samsung and all three do not work with the laptop.

  He continues to start again OR it gives a BSOD

  What should I do? It is impossible that all the 3 banks of RAM I tried are defective...

  Thanks for your help

  To properly upgrade the memory in your laptop or desktop PC, it is recommended that a pair identical memory compatible modules guaranteed of a well known brand is used to place the original single module. Remove the original module.

  Ability to mix, brand, speed module... essentially of the differences in the module is usually held in one upgrade failed.

  Samsung module memory + module Corsir = memory upgrade memory failed.  Kingston 1333 Mhz + module Corsair 1066 + upgrade module memory has failed...  These failures are expected.