Pavilion P6000: where is the TPM chip, located on the card mother VIOLET-GL8E M2N78 - LA 513430-002

Similar Questions

• Drivers Windows 7 x 64 for the card mother Memphis-M

  Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

  Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

  I need:

  Simple communication controller PCI Chipset, USB 3.0.

  Thank you and waiting for a response.

  Hello:

  You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

  Chip set:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  USB 3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

• The card mother MS-7184 (AmethystM) in my old HP PC takes in AHCI mode?

  First of all, thank you for taking the time to read my post!

  I recently bought an OCZ Aligity 4 256 GB SSD drive. I want to use the SSD as drive replacing the original hard drive in my old HP Pavilion Media Center TV m7334n desktop PC. Here is the link to my pc:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=1821850

  I know that the motherboard identified on the Web site above for this model of PC is A8AE-(AmberineM), but the motherboard I have is MS-7184 (AmethystM), the specifications of the motherboard is here:

  http://support.HP.com/us-en/document/c00378480

  I updated the BIOS with the latest version (3.47, 03/03/2006) I can found on the HP website. In the BIOS, I can't find any info on the AHCI support. My questions are:

  1 - is the card mother MS-7184 (AmethystM) in my old HP Pavilion Media Center TV m7334n Desktop PC support AHCI mode?

  2. how to configure CMOS when I use the SSD as my main drive on the old HP computer?

  Note Please that I have aleady copy drive hard whole orginal on the new SSD and I started my computer on the new SSD. This works. I have another post questions on the recovery of the system on the SSD, the post is here:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g/system-recovery-doesn-t-work-on-cloned-SS...

  Thank you!

  You are the very welcome.

  I leave these settings at their default values.

  You have the SSD connected to sata port, and it must operate to the maximum 150 Mbps transfer speed, 133 or 100 no matter what readings are displayed, as would an IDE drive.

  The problem is that since there is no AHCI setting, the drive cannot enjoy the native command files or TOPPING.

  Aside from that, an SSD should be better that a standard SATA I mechanical drive or IDE hard drive.

  Even subjectively, you should 'see' a difference in sensitivity of disc, not you?

  Improved time, faster startup time for research, for example.

• Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09

  What started it stops early on with the error:
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03

  I have the option to continue with F! that works.
  I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.

  Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.

  Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
  The error indicates this device 01 because of controller 09 conflict
  Have you tested the RAM?

  Recommend doing this! You can use a tool like Memtest or similar.
  Maybe it isn't that a Ram problem and new modules could solve your problem.

• 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

  I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

  How to pass the video?

  What cards are best for this system?

  What has changed in the BIOS or other settings I should do?  How can I get them?

  Thank you

  Art

  The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

  Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

  Please click the White Star of KUDOS to show your appreciation

• After some time, my screen goes black have to re boot. It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr

  After some time, my monitor goes black have to re start at 5 min to 2 h said mge device is grapish until this day.   It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr XP HP pc 1.3 gh 512 ram 120g hd

  Assuming that the integrated graphics controller is OK, try the following:

  Launch a command (as a Runas administrator) window and enter the following commands in it:

  powercfg-h off

  powercfg/change-standby-timeout-ac 1440

  The first command turns off "Feature of putting into hibernation"

  The second command replaces the timeout stansby 24 hours when the system is connected to AC power.

  (The number is in minutes).

  Good luck.

• ESXi 3.5 does not start after the failure of the card mother SATA port 0.

  I have a DELL PE1800 with ESXi 3.5 U3 Server installed on HD1. The card mother port SATA 0 failed. I bought a new sata, Rosewill RC-218 controller card. Installed and attached hard drives. Configured the BIOS to disable the integrated and restarted sata controller. Now ESXi 3.5 will not start.

  My old configuration has two hd with ESXi 3.5 U3 on disk 1 and my VM on disc 2. Now no drives are seen by ESXi 3.5. Yet see bios of them.

  Todd L.

  Another thing you could try is to install ESXi on a USB key. http://www.yellow-bricks.com/2008/07/29/ESXi-35-update-2-on-a-USB-memory-key/

  Plug your storage space on good sata port. I have an eye for a sata controller from dell PERC 5 can be had quite cheaply on ebay and others.

• Q-116 flag 23: 23 Pavilion Q 116 there a TPM chip?

  The Pavilion Q 23, 116 has a TPM chip?

  Hello:

  If so, there will be a category of security devices in Device Manager.

  Click to expand this category, and there should be a chip v 2.0 of TPM.

  If there is no safety devices category in Device Manager, then your PC does not have a TPM chip.

• Compaq pressario all-onesg2: where is the card on a compaq pushing all-in-one Sg5.I wireless have back, but do not see it.

  My wifi stopped working and at startup messages indicate a defective wireless card or the connection, but I can't. With broad back, I see the motherboard, power supply, etc... but wireless card unless it's under the motherboard?. Thanks for any help.

  It is very similar to the Board of Directors you provided but mine is a sg2-210uk and I have now found the card under the motherboard. Thanks for your comments, that it encouraged me to look underneath and search. Excellent forum with a quick response.

• Replaced the card mother zd8000 and need a hand, help please...

  Hi all

  I just replaced the motherboard on our HP zd8000 (pentium 4 3.0 ghz, 2 GB ram, Win XP) with an opportunity tested but good MB and need help with the following.

  (1) I cannot play DVD movies as the error 'no dvd decoder' present which was not a problem before now?  Where can I get a free decoder that works as Windows displays only paid versions?  We have the drive to dvd with lightscribe. SOLVED! CNET has DECODER.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------

  (2) internal temperature, according to SpeedFan, revolves around 140 degrees with just surfing the Internet.  Is this a normal temperature because I have only one of the three fans running on the laptop?  Is in any case to all the three fans running to be sure there is no problem?  I'm positive, I plugged everything but still once a single fan seems to work?

  (3) I discovered that some of the pins were damaged in the card reader.  I can get the seller to give me a discount, not intend to tear apart just for it, but is there the concerns of short or otherwise?

  (4) our battery arrested charge years ago, these were known as such, but I bought a new one last year and hope that the replacement MB would load it again.  No luck though.  Can I do, update of BIOS etc, in order to make the battery charge?

  (5) whatever it is you people can think for me to test to make sure the new motherboard is working correctly?

  Thank you, Ralph

  PS, It's a replacement card correct according to the serial numbers of MB.  Everything seems to work properly except mentioned.  Our graphics came out on the original MB.

  Some of the sons had grown out of the harness that connected the two other fans.  I double checked and replaced these so now the laptop works quite a bit cooler.

  EVERYTHING IS GOOD TO GO!

• sequence of the RAM on the card mother dx58m01

  I have a dell xps 435mt core i7 920 with a studio card mother dx58m01. There is 6gig ram. 6x1024mb glue 1066 mhz. I want to change ram at 3x2gig sticks memory triple channel 1600 mhz. does anyone know the sequence of installation for this configuration. I currently at 1,3,5. It seems to run pretty slow however. Thank you guys

  Contact Support technique Dell http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&cs=19&l=en&s=dhs& ~ ck = anavml and give them your express service code and/or your product tag so that they can identify your specific machine.  Are all devices that are identical except for the new chips?  Then they should be able to tell the order to use because they know a lot more about their systems we do.  We could just guess they know.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6

  So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.

  To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.

  If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.

  Thanks to all who take the time to read/answer

  Drew

  At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.

  You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.

  EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.

  Cards with BIOS double EVGA

  http://www.EVGA.com/articles/00767/

  I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.

  Sapphire video card specifications

  http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

  What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.

  I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.

• EVA GeForce GTX 750: Question on the compatibility of card and the card mother graphics

  Hello!

  After this purchase pre-built Intel PC five or so years ago, it has graphic capeabilities are unfortunately insufficient for what I need. Long story short, I want to buy a new graphics card, but I don't know that the motherboard system takes care of everything. The card I currently have is a GT230 and I want to move to is the GeForce GTX 750 EVA and my motherboard is an MS-7613 (Iona-GL8E) with an i7-860 processor. I can update without burning my PC?

  Thank you!

  Edit: rather than tell you about the PC, it would be easier to show you: http://support.hp.com/us-en/document/c01969874

  Ranger_621, welcome to the forum.

  750 GTX graphics cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Therefore, it would be incompatible with your computer.  The last series of video cards that does not need UEFI was 640 gt.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Dell desktop computer just ran scan & system - failure of the card mother how fix this?

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  Hi, I have a Dell desktop computer that came with an Epson printer & all the other necessary things: keyboard, mouse, speakers, & flat screen.  I bought it in 2009.  I'm on social security, so I can't afford to buy a warranty with Dell, which missed.  My system works fine.  Dell offers, free of charge, a scan to check the memory card mother and other issues.  I do the scan every month.   It was record past in all categories.

  However, I just did a scan on July 6, 2013 and the analysis of response of the system said failure in red.  Then he said: 'mother' I know refers to the hard drive.  I am over 65 and fairly low tech & live alone.  However, I am pretty savvy, computer or as much as I can be.

  I checked the help MSN menu, but could not follow him.  This is why I post my question on the MSN Community forum, which helped me with other problems in the past.  I have also just posted on the Dell forums.  I have MSN as my homepage & use IE 9, it works best for me.  The only email I have is on AOL and I've been there for years without any problem.

  I have Verizon FIOS; If I can't get an idea of how this problem on the forums (in fact, I prefer MSN forums) I'll call them.  They offer free advice by telephone.  If necessary, they will come to my apartment to check my system & require a rate SIGNIFICANTLY lower than the Geek Squad.

  However, I did not do anything to the system.  I have update printer drivers, since the printer has suddenly stopped working when I replaced the cartridges.  I don't think that this should be a problem.  I replaced the cartridges before.  I have an Epson Stylus NX110 printer/scanner/copier & called Epson, they SUCK.  The printer comes with the computer.  I have installed new drivers & the printer works fine.  I do not have a wireless system, & I don't have a digital camera.  The only other conflict can be I have two Microsoft Security Essentials AND free AVG downloaded as my anti-virus, anti-spyware.

  I know that the new drivers, I installed the printer were great, it was an update of Epson which I figured out.  I as well need the computer & printer. I am disabled & only at home much & this is my link with the outside world.  I do a little writing & letters print & printing (Yes, postal mail) to friends & also letters to additional government assistance of my State & County.  I appreciate all the advice and I'm sorry it's so long.

  One last thing: I keep getting pop-ups from this survey company called five votes.  I have tried everything to remove them, but they reappear.  I do not take surveys & I get rid of pop-ups.  I have my Blocker on MSN and AOL.  Could these pop-ups have corrupted my hard drive? I've been doing them for months, it is very likely.

  Thank you, Karen

  First of all - the 'motherboard' does not mean 'hard drive '.  This means that the "mother".  :-)  The drive is the storage processors is the brain and everything connects through... the "mother".

    
  Second - why sweep you all the months?  Unless you are having a problem - well - I suggest you not to do so.  Heck - you may see a false positive.  Do you have any indication that you have a hardware failure?
    
  Here's what I suggest:
  (1) stop the execution of this "free scan of Dell.
  (2) ensure that the drivers of motherboard, video card, network device and peripheral chipset audio are later you can get - on the Dell site for your specific Service and operating system combination label (drivers and downloads section, use your service number and put in the operating system you are using.)
  (3) never use Geek Squad.
  (4) what is the "MSN Help Menu?
  (5) choose AN antivirus software - two is misguided and may cause problems.
  (6) run some scans of malware with the details, I will give you right after that...
    

  Regarding AntiVirus - free are very good: Avira, AVG, Avast, UnThreat

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  For the printer - you have downloaded and installed the form here?
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128284&infoType=downloads&platform=OSF_W_7-64

• Pavilion t3259.fi: Bios version of the card mother MS-7184 3.40

  Hello

  I need to get the 'original' bios version 3.40, I think that the file is sp26648.exe

  It has been available on the HP ftp, but not more.

  Could you please upload again or send me an e-mail.

  Thank you.

  Thanks for trying to help, but I updated my bios to 3.47 and what I want to do is it downgrade to the 3.40 origin.

  The problem is that with the 3.47, the case fan is still running with high rpm and there is an ugly logo blank screen HP at the STATION, I would also like to see the screen of the original POST (detected CPU, RAM test, temperature, etc...).

  In fact, I did now something that is NOT recommended but it works without problems for me now-> I have updated the bios with a bios MSI 7093 and I have access to a lot of option in the bios now (I needed to book the equipment sound blaster emulation IRQ5).