Pavilion p6210y: SATA host adapter problem

Similar Questions

• Pavilion p7 - 1108p wifi adapter problem (running 8.1 Win)

  Expanded and published, the lack of resolution...

  Pavilion p7 - 1108p, running Windows 8.1.   Adapter Wi - Fi keeps releasing sporadically and without apparent reason.  I opened the network and sharing Center, and under active networks, click connections, and then click diagnose.  It resets the adapter and all is well.  I have two other computers and a tablet on this network, and none of them has this problem.  Please advise what the question might be: I have something set wrong?  Do I have a hardware problem?

  More info: when I use the troubleshooting tool to diagnose and reset the network card, I get 1 of 2 messages.  It's either.

  "" Wi - Fi"is not a valid IP configuration",

  or a message to both parties,

  "The connection between your access point, router, or model of cable and the Internet is broken. ” ;

  "The default gateway is not available "

  Please advise as soon as possible, because it is critical for having us this machine on-line 24/7. Thank you!

  You are the very welcome.

  If you have the problem fixed in a hurry, I'd consider having a network adapter wireless usb external of your choice.

  I use the Linksys AE3000 adapter dual band usb wireless with my HP 8200 Elite CMT on W8.1 64 bit and it worked without problem for months.

  It works great using the drivers W7 that accompanies it.

  Otherwise, you will have to wait for who knows how long for Mediatek fix the driver.

  You can disable the card in the Device Manager or physically remove it from its support if you want to add a usb wireless network adapter.

  Some of the reviewers said it did not work with W8/8.1, and some have fact.

  All I can say is that I had no problem to use drivers W7 supplied on mine.

  http://www.Newegg.com/product/product.aspx?item=9SIA24G1E39247&cm_re=AE3000-_-33-124-477-_-product

  Or you can get other brands...

• HP Pavilion G4 1003-TX: HP Pavilion G4 1003-TX adapter problem

  Hello... I have HP pavilion 1003TX G4 laptop who cureently having graphic card problem. Technician in my place, said that is caused by the solder connection on my Radeon graphics card.  He said, it can be repaired, but the same problem will happen again soon unless I replaced my graphics card with a new.

  In my laptop, I have a Radeon and Intel graphics card which I can move freely. My question is, if I change my Radeon for my Intel graphics card, is solved my problem of graphics card? Is my laptop still won't last long, unless I buy the new graphics card?

  Please help me if you know the answer. Thank you

  There is no way to pass. Two video systems are part of an electronic circuit integrated on the motherboard and if the Radeon graphics chip is bad the whole motherboard is bad. I wonder how the motherboard has been repaired? A lot of "technicians" use a very crude method of just warm up the video chip with a heat gun instead of making a more complicated "reball" of the video chip. A hack job is the last 3 months, but a good reball will last a year or more.

  Once the video chip was repaired once it probably cannot be done again if your only option now is a replacement motherboard or a new laptop.

• Desktop HP Pavilion p6210y PC: RAM install problem

  My office is in the factory with the exception of the video card which is a NVIDIA Geforce GTX 750Ti graphics card.  I bought by 4 chips of RAM DDR2 PC2 6400U 800 MHZ 240 PIN by Samsung and installed according to the instructions from HP.  I also double checked my bios and updated to the latest version that has been on the HP website on 20/05/15.   When installed and rebooted my computer I first had a problem with my computer freezing completely on my and I have to make a difficult stop by disconnecting the tower.  I did a reboot and done a diagnosis (F9) and waited to see what would do the memory.  Initially, I had a 'FAIL' BIOMEM-1 error.  After a few attempts, I then is gone one chip at a time and done the same thing.  After that the first 3 installs successfully, I determined then a single chip was bad.  At this point, I restarted my system and started running it with 12g of RAM.  After about 10 minutes, my computer froze again and went to a blue screen stop.  After that restart the desired system get a dskchk is for windows.   I've looked online and made a Windows hotfix, and cured this problem but continued to get the gel and closed blue.  I then reinstalled the factory RAM chips, and it is not reappeared since.  According to all that I can see 3 of my chips are good and should run.  What other steps could be or are at - it a driver for updating bios them or not, I have to do?  Help, please!

  @sooperglew

  Only using three DIMMs will force the PC to run in single channel mode.

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston andCrucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

• HP Pavilion p6210y: Office flashing after upgrade Windows 10

  I have a flashing desktop (goes black and office) after upgrade to Windows 10.  Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.

  I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.

  After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.

  So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.

  So, I rolled back to Windows 7 new.

  I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.

  Information about my machine:

  HP Pavilion p6210y

  Windows 7 Home Premium, 64-bit

  Video card: NVIDIA GEForce 9100

  All the suggestions/help will be very appreciated.

  The only thing that solved the issue is reset my machine while keeping my personal files.

  I've never understood what really caused it.

  Thus, after the upgrade when the screen is flashing, I have reset the PC.

• How do the work of Illustrator CC Host Adapter?

  I tried to set up a test Extension for Illustrator that uses the library of the adapter to the host, but Illustrator CC seems simply never to load the plugin of the adapter to the host.

  I use the Extension Builder 2.1 test and Illustrator CC (17.1.0 64-bit) on Windows 7.  The AIHostAdapter.aip files are in the correct Plug-ins\Extensions folder, and the AIHostAdapter is listed when I go to help-> system information.

  My loads fine Extension in Illustrator, but the AIEventAdapter.getInstance () .pingPlugIn () is always out 'timed' event

  I use a simple "Hello" Extension created by the manufacturer of the "New Extension project" wizard extension and include the libraries of the adapter to the host in my selections of what must be used.  I exported the project to ZXP and installed.  Install the extensions Manager, AIHostAdapter.aip files go in the right place, Illustrator starts just fine and charge my extension, but the host Adapater never seems to be available.

  This same Extension works very well and very well in my other Illustrator CS6 instance can access the host adapter.

  Is there some other trick to get it to work with CC?  Or is the integration of host Adapater in CC somehow broken right now?

  Please let me know if any additional information would be helpful.  Thank you!

  I believe that the Extension Builder trial version comes with extension of Ia corrupt CC

  In addition, there are problems with inDesign host adapters - include it and extension will not compile

• Dual monitor support for desktop HP Pavilion p6210y PC

  I would add an additional monitor to my HP Pavilion p6210y.  According to the data sheet of the product HP, the M2N78 - motherboard comes with 300W power supply which currently comes with:

  * Built-in video is not available if a graphics card is installed.

  Thank you Dean I'll give it a shot

• Desktop HP Pavilion p6210y

  I have a desktop HP Pavilion p6210y and I was wondering if it is cheaper by a whole new computer or add a new processor and add more RAM that my computer has slowed particularly new games I play.

  I suggest that you compare to your specifications listed here to possible improvements listed. If you wander off list, beware.

  Card games and comparisons can be made here. Select the "Can I Run It' in the top bar.  Then you will know what you really need as a minimum.   Besure to consider a graphics card and the power supply.  (650W like a max).

• Cannot install the driver for Pavilion-dv6-Wireless-Network-Adapter-Drivers

  So I just install a new copy of Win7 Ultimate 64-bit version and I'm having the hardest time for an installation driver for the wireless network card.

  I was download the map and try to install at least 5/6 times but it will not yet appear in my device manager, or I am able to turn on the radio/satellite icon in my keyboard to turn on the wireless adapter.

  I have spent the last 2 hours trying to get this to work without success.

  Product number: A6Y56UA
   
  Description: HP PAVILION DV6-6C11NR ENTERTAINMENT NOTEBOOK PC

  I followed the post on this thread and dl only adapter but it still wont ' appear in my book. It drives me crazy

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/pavilion-DV6-wireless-network-adapter...

  Here is the link for the driver, you need to map wireless in this model.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp? lang = in & cc = us & prodTypeId = 32...

  Hello warrantt,

  Welcome to the HP Forums!

  I understand that you can not install a wireless card with your computer. I'll do my best to help you! Here are both available for your laptop:

  Driver LAN wireless Broadcom

  RALink 802.11 b/g/n WiFi Adapter

  Try to download and install a. If one does not work, try the other. Please let me know your results and you see any errors. Thank you!

  Mario

• My Acer Aspire 9410Z (Vista) is not read my 4 GB SD card, even though I have a SD host adapter. Help?

  As stated above, it does not appear that this is on my computer. I am very confused because I have been asking this question for some time and received many answers, but none of them went around. A host adapter is different from having a SD driver? I'd like to think, it is, but I'm really, really confused. ^3^;;;

  I need to get music on my SD card for my DSi. :/ A 2 GB SD card would be better?

  Hello

  This SD card has already worked on your computer?

  Method 1: Check the status of this card in Device Manager.

  See the links below for help on Device Manager.
  
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Method 2: Try to use the same SD card on another computer and check.

• The connection has failed. Limited connectivity. Adapter problem

  Hello

  I use an Acer Aspire One Laptop that suddenly started running very slowly and taking a lot of time to stop and restart. I want to update all the drivers and software malware but cannot currently get online.

  When connecting to my usual wireless network I get the error: "the connection has failed. This computer currently has limited NETWORKNAME connectivity. "

  If I click on "solve problems" the end result is "it could be a problem with the driver for the wireless network adapter".

  Connection via an ethernet cable is not possible.

  If I run ipconfig/all, I get this:

  Suffix main Dns: (empty)
  Node type: hybrid
  Active IP routing: no
  WINS proxy enabled: no

  Card tunnel Teredo Tunneling Pseudo-Interface

  State of the media: Media disconnected
  Suffix the connection-specific DNS: (empty)
  Description: Teredo tunneling Pseudo-Interface
  Physical address: 00-00-00-00-00-00-00-E0
  DHCP enabled: no
  Autoconfiguration enabled: Yes

  Grateful for any advice.

  Thank you very much
  Sam

  Hello Sam,.

  It seems that this may be a problem with your network driver, may you please follow the steps below.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-GB/Windows/fix-network-adapter-problems

  If you perform the steps on which solves your problem with internet and your computer is still slow, I recommend you to install and run a scan with the following programs:

  Malwarebytes Anti-Malware, Junkware removal tool and AdwCleaner.

  Thank you.

• Network host connectivity problem

  Hi all
  I have a bit of a strange an ESXi 5 U1 host connectivity problem. The host has a network card in the 10.0.0.0/24 subnet, and from there it can ping both devices but cannot ping to two other devices. To explain a little better:
  There are two hosts with identical hardware (HP ProLiant DL380 G6) both built with the same picture of ESXi 5 U1 from HP.
  There is an IP address on the switch (Cisco 3750 gigabit) management.
  There are two servers running Openfiler, which I'll use for ISCSI data banks.
  All these devices are in the same VLAN in the 10.0.0.0/24 subnet. host 1 is identical to the 2 host configuration (bar IP address and host name, etc.). Host can ping all devices on the subnet 1 and maybe ping by all devices on the seubnet. 2, the one with the issue of the host can ping and ping the Cisco FoxyCode and host 1, but cannot ping or ping by one of the two boxes openfiler.
  Research on the openfiler boxes I see missing entries in the arp (marked as incomplete) table. Host 2 he entered complete arp for the openfiler boxes. A trace of the wireshark package shows the openfilers sending arp requests but no response from host 2. The Cisco and host 1 to get the answers.
  I have patched the critical fixes host 2 until the last critical and no, applied the latest versions of firmware HP etc. Swapped, cables, tried different switch ports and even different NICs on host 2, all to nothing does not. The Cisco ports configured all identically from host 1. The openfiler boxes are set up with interfaces servile and the Cisco switch ports are etherchannelled for these. There is no etherchannel or link aggregation etc for guests, straight connection to the front in the VLAN.
  Interestingly, all devices also has an interface in the 192.168.2.0/sous-reseau 24 for management and all devices can see all other devices here absolutely fine.
  If anyone has any ideas on where to go from here please let me know, I'm going crazy trying to understand this one!

  ts999 wrote:

  The openfiler boxes are set up with interfaces servile and the Cisco switch ports are etherchannelled for these.

  I wonder if the Etherchannels in Openfiler servers might not work. Depending on how the switch load balances executives, this could cause a host to work and the other is not.

• laptop HP pavilion g6: ralink rt3290 802.11bgn wi - fi adapter problem does not not when turn on pc

  Hi iam using windows 8 64-bit HP pavilion g6 my adapter ralink rt3290 802.11 wifi bgn does not work for a few days because of the sudden closure of the pc by the battery problem, whenever it's strcuked reason more to heat or liquidated suddenly drops ralink adapter not worked for some time, now it not group days I updated my driver of latest vesion by the Device Manager in windows to the latest version still problem persists, I have to reinstall it

  Hi @eswar_krishna,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the wifi adapter. I'll be happy to help you.

  The following pages are useful for troubleshooting wireless connectivity problems.

  Troubleshooting wireless network and Internet (Windows 8)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Pavilion m8170nl Netwrok adapter problem

  Good evening gentlemen,

  I have a problem with my Atheros Wireless Network Adapter.

  I have just installed Windows 7 and the adapter needs new drivers.

  When I use programs like everest I see only the production of the card: Atheros.

  I need the type that I use to get the specific driver for computer of mine.

  My computer: Pavilion M8170nl

  Bought: 2007

  I am from the Netherlands forgive if wrong spelling of English mine.

  Thank you in advance,

  Peter

  Pitchingpeet wrote: thanks for your quick response. I rechecked and the info on the sticker is: PC Pavilion m8000

  m8170.nl it should probably be sorry m8000. I use x 86.

  Hello Pitchingpeet, it seems that the model you listed may be the appropriate model number, and HP U.S. just doesn't have the information about your system.

  I managed to locate a Vista driver x 86 for the Atheros wireless network device.

  Here is the link to download. Even though she displays for x 86 Vista, it may well run on an x 86 Windows 7 installation.

  I was unable to find the exact model of your network device wireless Atheros, but here is a link to Atheros that may have the drivers you need .

  Look under the section of x 86 / x 64(Win7,Vista, XP, Server 2003) Atheros AR81Family Windows Driver.

  There are two downloads for different devices, you may need to try both versions if one does not work.

  All or part of these drivers can work and they can't, but it's worth a try.

• Pavilion g6: Solutions for Ralink RT5390R 802.11 bgn wifi adapter problems r 4 Windows7, Windows 8-10?

  The screen message is ""RT5390R 802.11bgn Wi - Fi adapter Ralink has problems of driver or hardware-related " "

  In this forum, the given solution is for Windows 7 and 8. The same link he will solve for Windows 10 or is there another solution?

  Hello:

  There is a W10 driver, you can try for this model of the wlan card.

  5.0.57.0 Rev.A (June 18, 2015)

  Microsoft Windows 10 (64-bit)

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe