Pavilion P6520F: p6520f driver usb 3.0 pci card

To make a long story short, with assistance from HP Support Forum's, I've recently restored to my Pavilion P6520F leave an 'upgrade' forced Windows 10, back to Windows 7.  Unfortunately, when I accidentally upgraded to Win 10, my card usb 3.0 pci card decided to die in the transition (not compatible with Win 10).  I replaced the card with a PCI-E DEGOL Express USB 3.0 Card 4 Ports and power connector 4-pin 5V for desktop computers [ASIN: B01FUE7IS2].  The map loaded and worked like a champ... Until I started Windows 7.  Now Windows 7 can not find a driver for it, and provided driver disk will not load a driver for Windows 7.  I contacted the seller, and they assured me that the card must be compatible Windows 7.  Is there a generic driver online of these cards USB 3.0 can I load to bring back my new card?  Unfortunately, I threw the old card, if I can't relive the Degol map, I'll have to buy a new card.

All advice appreciated!

Hello

USB for Windows 7 drivers are the supplies made by the manufacturer of the card.

You must debug the problem if the DEGOL W7 driver does not load. Generally, you will see an error code in Device Manager for your USB card. This could give you some advice.

HP is not post drivers for third party material.

Tags: HP Desktops

Similar Questions

  • ASUS USB 3.1 PCI card in the Mac Pro 4.1/5.1

    Hello

    As the proud owner of a Mac ro 4.1 (updated to 5.1 and 2 X of Hexa-Core Xeon X 5670 CPU) I "suffer" a restriction.

    And it is now old and really slow USB 2.0.

    I would like to add a PCI USB 3.1 and I spotted the ASUS USB 3.1 PCI card.

    Of course, this card is given only as compatible with Windows...

    But I've seen a few reports of people claiming to have inserted this card in their Mac and have used successfully with several devices.

    It seems that these reports are under "Yosemite".

    I was wondering if they are always good with El Capitan...

    I put the card in the Mac.

    It seems to be recognized by the Mac Pro.

    In fact looking at the system information, under "PCI" give "Expansion USB card".

    BUT:

    -No USB key I have insert mounts;

    -No USB stick plug mounts;

    -my mouse lights

    -the keyboard does not work...

    So I'm wondering if:

    -El Capitan has got rid of the first USB support 3.1 to Yosemite?

    - Or if my card can be default somehow?

    -If this behavior can be caused by updates, I made (Mac 4.1-5.1 online) + 8-Core CPU-online 12 Core CPU?

    If anyone would be able to help me, I would be eternally grateful :-)

    If so, the card can be sent to the seller...

    Kind regards.

    FRED

    Hello there Penguiner.

    Looks like you bought the ASUS USB 3.1 PCI card and questions about its compatibility with your Mac Pro. The following Knowledge Base article speaks to the maps provided by Apple which have been tested and work with the Mac Pro:

    On the compatibility between Mac Pro-carte models graphics

    Since the ASUS card is not listed, the reference of the article could be a good recommendation to follow:

    This article applies only to video cards that originally shipped with a specified Mac Pro or upgrade kit have been offered by Apple. Similar maps that are not provided by Apple may have compatibility issues and you have to work with this card provider to confirm compatibility.

    Thank you for reaching out to the communities of Apple Support.

    Kind regards.

  • What is the correct USB 3.0 PCIE card for Z800?

    I am looking to buy the correct USB 3.0 PCIe card for a Z800, but I can't find any HP thru. Anyone has the info > 12 and 60 cards HP dollar on EBAY, but I don't know if those who are good.

    Hello

    Based on the following specifications, the machine has a lot of options:

    http://h18000.www1.HP.com/products/QuickSpecs/13278_na/13278_na.PDF

    You can buy 1 port card, map 2 ports, card port 3 or even 4 ports card such as:

    http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-PCI-Express-SuperSpeed-USB-3-card-adapter~PEXUSB3S2

    You should check the slot to get the support of the card right.

    Kind regards.

    PS eBay is another story, you can buy some card dollars.

  • Remove a desktop USB 3.0 PCIe Card Questions in an HP e9200z

    Hello

    I have a:

    HP Pavilion Elite e9200z CTO desktop PC
    Model name e9200z
    Product AW017AV-ABA number
    Software Build 94NAv6PcA4

    Name of Microsoft Windows 7 Home Premium (64-bit) Edition
    Build number 7600
    Version of DirectX 11

    Motherboard
    System Board
    Chipset AMD RS780/RS880
    AMD SB700, SB710/SB750 Southbridge
    Box spring
    Manufacturer FOXCONN
    ALOE products

    BIOS
    The vendor American Megatrends Inc.
    Release Date 11/09/2009
    Version 5.03 BIOS string
    ROM size 1.00 MB

    AMD Athlon (TM) II X processor 4 620
    Name AMD Athlon (TM) II X processor 4 620
    Hearts 4
    Son 4
    Temperature C 22.00
    The current 2.60 GHz speed
    Multiplier x 13.0 (4.0 - 13.0)
    Features (+) MMX, 3DNow! (+), PSE36, x 86-64, SSE, SSE2, SSE3, SSE4A, NX, SVM
    L1 Cache of Instruction 4 x 64.00 kB
    L1 Data Cache 4 x 64.00 kB
    L2 4 x 512.00 KB of Cache

    Video card
    NVIDIA GeForce G210
    Adapter Chip Type GeForce G210
    512,00 MB video card memory
    Video card in the BIOS Version 70.18.9.0.10
    Driver c:\windows\system32\drivers\nvlddmkm.sys
    8.17.12.5936 driver version, 08/08/2010

    I installed a Western Digital SuperSpeed USB 3.0 PCI Express (PCIe) card. Then I discovered that my diet was already within its nominal capacity output when the computer was shipped. Now, whenever I have a USB device that is connected to the computer, it didn't matter if it is a USB 2.0 or 3.0, the chart shows a decline in the quality whenever I would like to start or restart the computer. If I start the computer without any device USB 95% of the time it would start the graphics in the way it was supposed to be. With the clarity of high definition. I know that I must remove the PCIe card, but my questions are:

    1. If I just uninstall the drivers and let the PCIe card in place if it will still support power?

    2 should I replace the power supply, after you fix this problem?

    3. is there a way to test the power subsequently to ensure that it is correct?

    4. If the withdrawal of the PCIe card is the best method. What is the procedure to remove? Out the PCIe card and uninstall the drivers through the Device Manager? If so, in what order? Card PCIe controller driver, driver finally hub?

    5 leaving the drivers installed and just released the PCIe card be a better idea? If ain't broke don't fix it...

    6. If I let the drivers installed, but get out the PCIe card drivers would say the power supply to power again?

    7. If I take the PCIe card that you call the part that I'd buy that connects to the hole in the back of the tower and what size would I get?

    Thanks for your help! Even if you can only answer some of my questions, feel free to jump in.

    Replacement of the power supply is a common practice. It's a question that is asked constantly. If your power supply is at the maximum, then replace it. It is not all that difficult to accomplish. Even a slight upgrade with a 85% effiecient PSU is a plus.

  • Pavilion 6235 upgrade with USB 3.0

    I want to upgrade my Pavilion 6235 with a USB 3.0 PCI card.

    Any suggestion / manufacturer that works?

    What else, keep in mind?

    USB 3.0 is supported by the motherboard?

    Thank you!

    Your MB supports USB 2.0 devices.

    If you want to upgrade to USB3.0 you can go for a PCI-E 1 x add on the map like for example this one:

    http://h10010.www1.HP.com/wwpc/my/en/SM/WF06c/A1-329290-332469-3965933-3965933-4144076-4144079.html

    If you are looking for in your MB chipset nVidia MCP61P (rev A03) race it should support the PCI-E 2.0, giving full USB3.0 so support.

  • PCI USB 3.0 Express card does not work

    Discription of the system:

    • HP Pavilion Elite HPE-520nl desktop PC
    • Processor Intel Core i7 - 2600
    • Memory 6 GB
    • Windows 7 Ultimate 64 bit
    • Service Pack 1
    • The map of USB 3.0 pci card the "HP-lable" is printed. Therefore an alaaa by HP original card.

    My HD portabale with USB3.0 interface is not recognized. Also all USB 2.0 memory sticks are NOT regonised by this card pci of USB 3.0.

    I searched on the web, this forum ect. and posible all software and drivers updated.

    Now at least there's no sign of escalmation in the Windows Device Manager.

    There are no errors in Windows and by double clicking on each and evry device a puppy window says: "device is functioning! (But when I put in a usb in the port USB3 device, nothing happens, not even a new drive appears under 'Computer'.)

    OK maybe the card is the default, so I bought at a local PC store a new one (Konig CMP-PCIE2USB3), but same problem.

    Well maybe the PCI slot is the problem... I put the card HP in the free location. But still no luck.

    Now I have 2 PCI USB 3.0 Express card in my office, but no USB 3.0 for my USB 3.0 devices connection.

    All USB 2.0 ports are working well.

    Help, please.

    I uninstall the original card and don't forget to remove the driver. Then install the Konig CMP-PCIE2USB3 and install the driver from the Web site. Don't forget to attach the molex 4 pin of your power supply.

  • Compatible USB 3.0 device (PCIe card)

    Hello community,

    who has managed to integrate ALL (if so, which) PCIe USB 3.0 with ESXi 5.5u2 card?

    I have a HP ProLiant server (which has USB 2.0 built) and I want to add a support of USB 3.0 PCIe card.

    Because I found several different opinions, I wanted to ask here if someone managed to do it.

    I run several W2K8 Server, but only one who has need of USB 3.0

    Thank you

    Martin

    I just discovered that all systems server before 2012 (that is, my 2008 R2 as well) DO NOT support the addon with USB 3.0 cards because they do not HAVE built-in SUPPORT for maps. Even if there are driver available for the system, given that the pilot "xhci" isn't a native component of the operating system, windows won't be able to use it. Single server 2012 can do

    I hope this helps others as well

  • Pavilion g4: hard drive 301 error

    I had a hard drive error 301 in my hp pavillion series. I understand that the hard drive has failed. I had replaced with a new one. I would like to know if I could always back up my old hard drive or to recover my files if I run it in a disk hard slave in another pc? Is there another way I can get back my old files?

    Thank you

    DAY

    If there is any life left in the drive, it is usually possible to recover some of the files. The simplest method uses a hard drive USB enclosure or a card. Then you plug it into a usb port on a computer to work and can browse the disc hard as internal hard drive. Copy files to the hard drive of the host computer.

    Ex:

    http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=2300574 & SKU = U12-42063

    http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3276554 & catid = 3770

  • HP SlimLine 450 - A24: Add an expansion card 4 ports USB 3.0 PCIe to a HP 450 - A24

    Hi, new to the forum.

    I have a HP Slimline 450 - A24 and would like to know if it is possible to install a port 4 USB 3.0 PCIe expansion card?  All I could find is that the expansion port was used. Is it possible to add even 4 port USB 3.0 PCIe expansion card?

    Thanks fror your help

    Hi @gulwing1,

    That the Forums are with you! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for more information on your system and whether it is possible to put a 4-port USB 3.0 PCIe card. I'm happy to give you a helping hand with this.

    Looking at the HP Slimline 450 - a24 Desktop PC product specificationsand HP and Compaq Desktop PCs - specifications (P-nutmeg nuts) of the motherboard, System Board lists no matter what expansion slot at all.  With this in mind, you cannot use a PCIe card in this system.

    It is unfortunately not the news you wanted, but answering your question. Please mark this message as a solution. Bravo would be appreciated as well.

    .

  • problem with driver usb controller pavilion g7

    I need driver usb controller pavilion laptop g7

    PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

    PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

    Hello:

    You must install the AMD chipset driver and reboot.

    You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  • Pavilion P6520F: downgrade windows 10 for windows 7 hp pavilion p6520f

    As a upgrade middle-of-the-night involuntary Windows 10 occurred, Can not stop random reboots every 20 to 45 minutes.  I give up.  I know that there is an opportunity (allegedly) to downgrade to Windows 7 in the first 30 days, but I wanted to make sure that no quirks to do with my fairly old machine.  I find Windows.old on my hard drive and my external hard drive.

    Everyone does this on a Pavilion P6520F or equivalent and advice?

    Hello @marionhouse,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I read your post about the issue of upgrade and wanted to help you!  I understand that the office restarts every 20-45 minutes, and you are looking to downgrade back to the Windows 7 operating system.

    If you decide to stay with Windows 10, you can try to solve the problem of reset, by examining the following document:

    HP computers - the computer restarts unexpectedly (Windows 7)

    If you're still having problems, then you should be able to use back to a previous generation option, in your system settings: HP Notebook PC - upgrade to Windows 10

    As you say, this feature is only available for the first 28 days after the installation of Windows 10.  Once you return to your original operating system, check to see if you encounter the same problem.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Try to install USB 3.0 PCI x 1 card in a HP Pavilion Elite e9290f

    Trying to install the USB 3.0 PCI x 1 card in a HP Pavilion Elite e9290f.   It is supposed to be a PCI x 1 slot and a PCI x 4 slot available for expansion.  I'm not one of these.  However, there is a very long slot just above the video card (x 32?).  Looks like that slot would host the map, but I do not see the power cables available with a male plug.  There seems to be 2 sheets of female power (red, black, black, yellow).  May need to find a male/male adapter, if these are sheets of power and of the large slot is one that I can use.  I'm setting up to use a 3 TB external drive and need to transfer about 2 TB of data.  Speed will really help.  Thanks for any help you can give me.

    Hello

    There should be a number on the motherboardPCI-E slots.  Any open slot should work.

    Review the information displayed in this thread.  If you look at the image I posted, then you will see two different types of connectors that you have a faucet using a separator of Y.

  • HP Pavilion 23 AiO need USB 3 Driver for Windows 7 Pro 64-bit

    Hello

    I need driver USB for HP Pavilion 23 AiO for Windows 7 64 bit. I tried to install the chipset and USB drivers on the HP driver Web site, but he says that I don't have perfectly meets the requirements for installation?

    Hardware ID

    PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C & REV_03
    PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C
    PCI\VEN_1022 & DEV_7812 & CC_0C0330
    PCI\VEN_1022 & DEV_7812 & CC_0C03

    OK, so I'm done fixing this problem. Because there, anyone having the same problem as me, here is how I did it.

    Assuming that you are trying to install the USB 3 on Windows 7 64 bit drivers...

    1. go here and download the Original Texas Instruments USB controller driver

    2. before executing the downloaded file (sp57875.exe), click on Start/Run then type folder and press ENTER.

    3. run the executable file (sp57875.exe). You will notice the content excerpt in the TEMP directory % opened in a randomly named folder.

    4 copy the entire folder on your desktop and then cancel the rest of the installation.

    5. go into your configuration/system control panel and Device Manager/security

    6. right click on the USB controller in Device Manager and click on Update driver software...

    7. click Browse my computer for driver software

    8 go to the desktop where you put the TEMP folder and select the src directory

    This should do the trick. I had to repeat 6,7,8 for all USB drivers that were not installed correctly. You can get a uknown device show up once you apply the first installation, just repeat steps 7,8,9 on the unknown device and it will install the USB 3.0 hub.

    I hope this helps.

  • HP Pavilion g4: HP has no Audion and PCI device driver

    My phone has no audio. Need a driver for the device in PCI and PCI Simple Communications Controller. Can someone help me? Thank you very much...

    My laptop is HP Pavilion g4 and Im using OS 64-bit of Windows 8.

    You are the very welcome.

    Here are links to the drivers you need...

    Audio.  Install and reboot the PC.

    This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

    File name: sp59649.exe

    PCI device:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp58518.exe

    PCI Simple Communications controller:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp58516.exe

  • Manual HP Pavilion p6520f

    IAM having a heckof a time to find an HP Pavilion p6520f desktop manual.  Can someone help me please?

    I tried a few sites on the web, but nothing seems to work.

    Here is the link for pdf downloads, I think that the guide "upgrade and service" would be the closest match to what you are looking for.

    http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 4216278 & task = &

Maybe you are looking for