Pavilion P6720TR: Installed new GPU does not work

Similar Questions

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• HP Pavilion g7-1365dx: wireless keyboard does not work.

  I have a combination and connected mouse microsoft wireless keyboard to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help.  I bought a new Logitech mouse and installed the new USB connector and the mouse worked flawlessly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USB connector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  CJB - 10 wrote:

  I have a combination of microsoft wireless keyboard and mouse connected to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help. I bought a new Logitech mouse and installed the new USB connector and the mouse works perfectly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USBConnector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  Hi ECJ-10,

  Well, you answered your question yourself. They are different products, so you need 2 USB receivers.

  The alternative is to get a replacement of microsoft mouse if it is still under warranty, they usually do.

  Hope this helps.

• Why the button new folder does not work

  the button create a new folder does not work

  Hello

  You have a common problem with Windows 7. The work that I and many others use is a utility called FileMenu Tools. You can download safely from this link: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After downloading, install the program. Each option is checked by default. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know how you fare.

  Kind regards

  BearPup

• Is it possible to return to the synchronization of the former in Firefox, as new synchronization does not work.

  As new synchronization does not work for me, despite the setting it in total compliance with the Mozilla Web site and no one took the trouble to answer the previous post today, is it possible to return to the synchronization of the former?

  To the best of my knowledge, the synchronization of the former is no longer available.

  If you post some details on the problems you are having with the sync, we can try to solve your problem.

• Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• new tab (+) does not work after the upgrade to v 23.0.1 forefox

  I had firfox version 22 I guess... Now, today morning I upgraded to v 23. It displays a message from one of the plug-in is not compatible with wud and therefore be disabled. now later I still once downloaded the plug in to check if its works or not but TI worked (as I had already guessed), or its display in modules or plug-ins.

  Now I don't get why the new tab does not work. Not at all. Its so very annoying. I googled the question and tried to reset firefox and the new tab in subject parameter: config. But nothing helped.

  I think that its because of this plug-in I've read somewhere that the parameters can be getting replaced by one of the defective Add-ons.

  Help, please.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can use the SearchReset extension to reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• The new tab (+) does not work, or the file/new tab feature

  The new tab (+) does not work. The function of the file/new tab does no more work. Both had worked correctly until noon today. I haven't added any software, plug-ins or extensions today, I do not have the Ask toolbar. I tried several of the suggestions made on this site, nothing helps.

  This problem may be caused by an extension that does not work in the current version of Firefox.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash

  Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash. I use a dell high spec, less than a year using windows 7 Home premium processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logic and McAfee Firewall and AV processors

  Thank you so much for pointing me in the right direction... Unfortunately, the link does not work but I bypassed using a part of the link, I did a search on google and found the plugin here. Adobe.com/Get/flashplayer/Current/install_flash_player.exe

  Thank you so much,.

  Johnny 777777

• I can t install apps, its does not work

  I just bought it and now for every apps it says installation failed try again but nothing works, anyone know why?

  Thank you very much it works finally I don t know why, but it of working

  2016-01-26 18:07 GMT + 01:00 kglad [email protected]>:

  I can t install apps, its does not work created by kglad

  https://forums.Adobe.com/people/kglad> in * Cloud Creative download &

  Installation *-see complete discussion

  https://forums.Adobe.com/message/8430429#8430429>

• GPU does not work in AfterEffects CS6 despite compatible graphics (NVIDIA GeForce 650 M)

  HI - when I bought my computer, I made sure he had a graphics card that was compatible with Adobe CS6, but I now have the message in the aftermath that the GPU does not work due to a driver incompatible. Here's the relevant info:

  Quick project: available

  Texture memory: 1613,00 MB

  Ray-tracing: CPU

  (Not available - incompatible device GPU or the display driver)

  OpenGL

  Provider: NVIDIA Corporation

  Feature: GeForce GT 650 M/PCIe/SSE2

  Version: 2.1.2 NVIDIA 347.88

  Total memory: 3,94 GB

  Shader Model: 4.0 or later

  CUDA

  Driver version: -.

  Features: -.

  Common usable memory: -.

  Maximum usable memory: -.

  I tried updating the driver, but the updated driver not working anymore.

  Any ideas how I could get the GPU to work, given that the map is supposed to be compatible?

  Thank you very much!

  Interestingly - I just checked in Premiere Pro and CUDA and GPU are obviously detected as underer 'Renderer', "Mercury Playback Engine accélération GPU (CUDA)" is selected.

  Oh - and I solved it, follow these instructions: How to enable CUDA for Premiere Pro and Adobe After Effects - YouTube

  -added my card in the raytracer text file where it is not included. Everything seems fine now:

  Quick project: available

  Texture memory: 1613,00 MB

  Ray-tracing: GPU

  OpenGL

  Provider: NVIDIA Corporation

  Feature: GeForce GT 650 M/PCIe/SSE2

  Version: 2.1.2 NVIDIA 355.60

  Total memory: 3,94 GB

  Shader Model: 4.0 or later

  CUDA

  Driver version: 7.5

  Features: 1 (GeForce GT 650M)

  The current usable memory: 1.93 GB (at the launch of the application)

  Maximum usable memory: 2.00 GB

• Update/install updated C3 does not work

  Update/install updated C3 does not work.

  Computer is an Apple C5 Desktop OS 10.5.8, Dual 2.7 GHz PowerPC, 3.5 GB of DDR SDRAM.

  I use applications Adobe C3, which now requires updates.  When an Adobe product needs an update, an update notification dialog box appears.  I click ok to download and install the Adobe updates to all my products.  I saw preferences indicating the C3 and a number of other applications.  I click on continue and the download begins.  Installation does not seem to happen or at least it is / was no indication except noting a percentage of completion passing.

  The problem is that this process continues and continues and continues during and in the course of every time I clicked on continue.

  When I could see the preferences once, I deselected all downloads there.  I then clicked on continue.  Unfortunately, the process has continued and continues and continues whenever I clicked on continue to download, but not to the best of my knowledge.

  There is no error message.

  This problem occurs for every download of the update.  I have to click Cancel to stop this process so that I can continue work on computer.

  Help, please.

  Bud Willner

  Many gave to the buggy auto update and go to the page updates, get them from there and run them locally.

  http://www.Adobe.com/go/gntray_dl_updates

• Pavilion 15 p287sa: my bluetooth does not work on my laptop brand new

  I just got my laptop and bluetooth does not work. Not sure if it was working before the upgrade of windows 10 that I had not previously and update. The laptop says it's working, but is not picking up all devices and it does not appear on my devices. It is running and my devices are visible. Anyone has any ideas until I wearily towards PC World?

  Ta

  Kelly

  Hello:

  Here's the W10 realtek bluetooth driver for your laptop...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_151716_1

• Pavilion g6: HP support assistant does not work

  Hello

  I use HP Pavilion 2301ax with windows installed on it 8.1 g6. I tried to run the hp support assistant, but he did not run.

  The program opens, but it remains empty. It shows nothing on it, only hp support assistant is written on the top.

  After that I closed the program, a message automatically "Hp support assistant does not work. Windows is to find a

  solution for it. "Then the message disappears. Well I look forward to the it.

  Hello

  You upgrade the machine to 8.1?  You need a newer version:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-135715-1

  Kind regards.

• Satellite 1410-303-new CPU does not work

  Hi all
  MI name Fabio, I'm an Italian boy, sorry for my bad English...

  I have a problem with my Toshiba Satellite 1410 303, I buy a new processor (Pentium 4 mobile 2 GHz 512 k 400bus) but it does not work.
  When I turn on my laptop, I hear the system Speaker beep contiunos that never stop until I turn off the system.
  I clear CMOS, and then I spend my BIOS with the latest 1.40 version.

  Do you have a solution?

  Thanks for the help

  Bye!

  Hello

  Have you installed the same CPU than before, or have you installed a different CPU?

  I checked the manual of the Satellite 1410 and he normally equipped with an Intel Celeron CPU processor and in my opinion, it is the reason why it doesn't work.
  Upgrading the CPU is not being official and it seems that the motherboard and BIOS don't support this CPU.
  Check this Toshiba document: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Welcome them