Pavilion P7-1414: Cable 11 disconnected my p7-1414, where does go?
Hello, my problem, as indicated in the title, is a wire labeled "Cable 11" disconnected from inside my PC I installed an SSD, the other day. I just need to know where he'll be back because I can not find it. The wire comes out of the front (but still inside the case), under the USB ports and comes with the cables connecting the USB ports.
Since the wire disconnected, my PC has SERIOUS difficulties to find wifi or modem routers, even the one in my house, and the intensity of the signal is catastrophic. It cuts all the time. To put it in perspective, my internet speed is so slow on the PC that I can't even run a speed test. I hope that this thread is the cause of the problems, and there isn't anything I don't know. Thanks for any help.
It seems that the antenna to the wireless adapter cable is loose. On THIS PAGE, it displays the image of the wireless network card. Click on the title "wireless 802.11 b/g/n.
the antenna cable connects to one of the card on the picture.
Tags: HP Desktops
I have problem with interface ethernet (wired) in my Satellite Pro U300. I use in many places (home, office, customers) and when I restore in sleep or hibernation mode interface ethernet shows that the * cable is disconnected *, despite the connection of the cable * is * connected and works perfectly with all other devices, laptops and PC.
The switch also shows that the there no signal link. But re - activate the malfunctioning ethernet port, just disable the ethernet interface and then after 5s (1 s is too short!) turn on.
Then a baloon in taskbar window indicates that there are 10 Mbit/s link, but actually, the link works at 100 Mbps (I can see it in the connection status window and the ethernet LEDs switch). This is the only laptop that has this kind of problems.
I have the latest version of the installed ethernet 5.664.205.2007 driver on Win XP SP2.
Is it possible I'm getting rid of turn on interface ethernet several times per day (except change laptop)?
I put t have a real solution but I have a few proposals of solution
First of all, you should check in Device Manager if the network card has been properly recognized. The Ethernet card should be listed under network without any yellow exclamation point cards.
If the network adapter has been properly recognized, then the next step should be checking the properties of the LAN connection.
There, you should check the properties of the TCP/IP protocol.
The settings such as IP address automatically get & address of DNS server automatically get must be marked.
My Pavilion p7-1414 video card began to make noise of fan. Cleaned and reinstalled. Always noisy. If gently, you hold the fan and prevent it from spinning noise constantly.
Has tried to buy a replacement at Best Buy, and I was told no way. They don't wear them. Mine is a PNY210 with 1.0 not 2.0, which is what they have now.
Where/what to replace this card?
The card would be acceptable with your power of 300W. But - you will need to modify the UEFI BIOS to accept the new card.
I recently bought your desktop HP Pavilion p7 1414, I am trying to boot from a CD to reinstall Windows 8 - I put the CD to start first in the BIOS, but when I restart the computer and I have the CD, "press any key to boot from the CD" is not displayed. It starts just directly to the computer HARD disk in Windows to connect.
I have 64-bit Windows 8. 6 GB of RAM and a terabyte of HARD drive space. I'm looking to reinstall Windows 8 for a new start. Any ideas why it won't boot from the CD?
You must go into the BIOS and enable the legacy Mode and disable secure boot.
Hi iam using windows 8 64-bit HP pavilion g6 my adapter ralink rt3290 802.11 wifi bgn does not work for a few days because of the sudden closure of the pc by the battery problem, whenever it's strcuked reason more to heat or liquidated suddenly drops ralink adapter not worked for some time, now it not group days I updated my driver of latest vesion by the Device Manager in windows to the latest version still problem persists, I have to reinstall it
I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the wifi adapter. I'll be happy to help you.
The following pages are useful for troubleshooting wireless connectivity problems.
In addition, you can watch the the power management of your wireless adapter:
Turn off the power to the adapter:
1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
2. expand the network adapters.
3. right click on the Ethernet adapter / wireless, and then click Properties.
4. click on the power management tab.
5 remove the check mark next to allow the computer to turn off this device to save power.
6. click on OK.
7 test cycle.
Forget the network: (Windows 8)
1. press Windows Key + C
2. click on settings.
3. click on change PC settings.
4. click on network on the left.
5. click on manage known networks.
6. click on the name of the network.
7. click on forget.
Reset TCP/IP on your PC:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
4 restart your PC and test.
It can also help to reset the Winsock Catalog:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
4 restart your PC and test.
Reinstall the NIC drivers:
1. download the drivers from here, but do not run them again.
2. go to your Start menu/screen and type Device Manager.
3. expand network adapters.
4. right click on the wireless adapter and choose uninstall.
5 install the drivers downloaded in step 1.
6. restart your PC and test.
Test an ethernet connection:
Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
Test another connection:
Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
Please keep me informed of the progress of things.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!
I have a HP Pavilion recently new model #: s5-1414. When I plug it into the power supply, the Green led lights up as expected. However, after pressing the power switch on the front, the green light will fade. Also the CPU fan and case turns on momentarily and then turn off.
I've tried a few things to debug it (mainly unplugging everything that I can get my hands on), and it turns out that when the power connector 24 pin to the motherboard is disconnected, then the power supply will remain lit after the failover of the front power switch.
This seemss me like either my power supply went bad (after less than a year?) or some defect (short) has developed somewhere on the motherboard. Ideas/tips for more debugging? Any help is much appreciated-thanks a lot!
PS - I tried the steps in Trouble Shooting Power Supply issues without a bit of luck, and there isn't really a way to ' light is on but turns off after start-up.
You are welcome!
It is a long shot, but I wonder if the power supply unit (PSU) has failed. This doesn't happen often, but it is not impossible. The symptoms may be caused by a power supply. Here's a guide to help you troubleshoot it.
I bought a power supply several years and it was DOA. For example, a faulty power supply may be possible.
Asking for your help to find the cable from hard drive HP Pavilion dv6-6140tx (the one that connects the hard drive to the motherboard).
It seems that the cable must have 7 + 15 pins.
Please help find the right site to buy this cable. I tried ebay, amazon, etc. to no avail.
Please consider this as an urgent request and help out me. Thank you
You need a good part number otherwise very difficult to find/search. If please use part number for drive on the following link and search. This can help
I recently bought a Nvidia Geforce GTX 560 ti and already plugged into my motherboard. My problem is that it is not find compatible hardware for the card (not sure I'm the right wording)
Hi there @Ky2Quick,
That the Forums are with you! I understand that you are having problems with a card of Nvidia Geforce GTX 560 ti you have installed. I'm happy to give you a helping hand with this.
Looking at the GeForce GTX 560 Ti spécifications and comparing to the HP Pavilion Desktop PC p7-1414 product specifications
Your system has:
300W internal (100V-240V)
1 PCI Express x 16 (Gen 2.0)
Nvidia Geforce GTX 560 ti card needs:
Minimum system requirements power: 500 W
Additional power connectors: two 6-pin
Support of the bus PCI-E 2.0 x 16
So the most obvious problem is going to be the power supply. You do not want to have at least a 500 W power installed on your computer, and more would be better.
Please let me know if help and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
The keyboard in my HP Pavilion g7 2010nr notebook is broken where it solders to the Board of Directors. There breaks in 3 places. Be an expert in welding, I can easily fix that. But, I prefer to start with a brand new ribbon cable instead of trying to patch-wire former.
Can someone tell me where I can buy a new Ribbon for the keyboard cable?
This might help:
I think something can happen with the keyboard.
Whenever I have my my Palm Pre USB cable, I get the "data has been corrupted, but was retrieved. Always take out your phone from your desktop computer before disconnecting"a message.
I get this even if I unplugged first using the icon 'Remove hardware safely' in my taskbar, to "Remove USB mass storage device".
All had experience of the world, and you have a suggestion about how this message can be deleted? Or is this a bug with the current Palm OS 1.02?
You need to go to my computer and looking for Palm Pre as a hard drive. Right click and select eject and you stop trying to get this message.
Mr President, my laptop model number is HP Pavilion n011tu, I use win 8.1. I am facing problem of disconnection automatic wifi... The driver installed is Mediatek MT7630E 802.11bgn adapter Wi - Fi 126.96.36.199.If the installed driver Version is suitable then please give the link for the driver needed
I tried several times to the HP Web site but can not decide...
Other things to try then.
Go to Device Manager, then click on the '+' next to network adapters. Right-click on the adapter wireless and uninstall it (make sure that the box is check delete the driver). Restart the computer. This will reinstall the driver automatically. Test several times to drops after that.
If the problem persists, try with Ethernet (wired) to the router to see if the problem occurs here as well, or if it has been limited to a wireless connection.
If he doesn't produce wireless, try to connect to another wireless network (a friends or public like McDonald's). So no problem, then the problem is on the home network. You must contact the manufacture of router or your ISP. If the problem occurs on a different network. Go to the next suggestion.
Then, as your current running Windows 8 would be a cooling system.
Try the above in the intended order and let me know the results.
Thanks for posting on the HP Forums.
OK, here's the problem. Just recently my computer has been disconnected from the internet. I'd watch the cable modem and it should be reset and then he would come back online. There is no problem with my hardward on Device Manager. The Cable Guy continues to tell me everthing works fine with the cable modem and my computer which is the cause of the problem. The problem happens only once in a while and different times. I havn't changed anything on my computer before starting to do. It was working fine before. I am also running windows vista, if this is useful all.
A. are there that lose the connection cable between the wall jack and the computer?
B. recent changes made on your computer?
Windows cannot make a cable mode is reset. The problem is the cable modem itself. You can update the firmware of the modem cable and also check the power source.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Hi all!!! I have a little problem with a HP Pavilion DV5 - 1105el!
The cable that connect the 2.5 "Sata Hdd with the motherboard is damaged and I can't find the product number!
The cable has 2 Sata connectors at one end (data and power supply), at the other end instead, there is a strange connector. On the motherboard where you connect the cable "Wire 20pin HDD" is written and under the present HB = 1 is written.
What is the product number?
Thank you very
You may need this: 483862-001 Kit hardware hard drive (including left and right mounting rail, connector cable, Mylar cover with tab and 4 rubber Insulators)
As you can see in this thread, my computer will get full performance GTX 750ti due to my PCI ports. So even if I upgrade my 500 Watt PSU, I always get a maximum return of 750 GTX ti. So in order to get maximum performance, what I have to get a new motherboard supporting the 750 GTX PCI slots ti?
Your PC meets the requirements of minimum 300 Watt power supply.
Your PC has the UEFI BIOS necessary for the performance of the 750Ti. Your BIOS version 8.xx supports UEFI graphics cards.
Your PC has a PCIe x 16 slot 2.0. The 750Ti will take place in a 2.0 slot, but at a slightly lower rate. It is not as slow as you think. A 3.0 card works fine in a 2.0 slot.
The 750 will fit in your case, as evidenced by the physical installation of the card described in the link to the other thread user in your message.
No PIN six additional or power connections 8 pins are required to run the 750Ti.
I run a GTX 970 in a 2.0 slot and it works fine.
You need to enter the BIOS (Setup) to disable secure boot and select start inherited before installing the 750 into the slot. You must also uninstall the current graphics drivers before installing the new graphics card. You need to return to the graphics drivers generic windows before installing the 750Ti GTX.
See you soon!
How do I disconnect my digital camera to my windows laptop 10
Thank you for the additional information. I thought I can be hard to interpret what you wanted.
Well, you want to disconnect safely your digital camera to the laptop. It seems that there is not an icon in the box "Show hidden icons" from the taskbar. If this is the case, you have no choice but to simply disconnect it. Although it is not recommended, I did several times over the years without causing damage. Make sure that you have copied all your photos on your computer before you disconnect it.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
Maybe you are looking for
Hello I installed IE10 on my new desktop (HP W7 Ultimate 32 and 64 bit), downloaded AVG free and selected the option to include the AVG Security Toolbar - everything has been installed. I then downloaded Firefox 22.0 but found no option to install th
I have a brother MFCJ870DW multifunction fax scanner printer. I want to fax a document directly from my iMAC using the Brother multifunction device. It is connected to my iMAC in WiFi in my house. I know its IP address, but I can't get the fax sel
HelloWhenever I try to install service pack 2 for microsoft officeIt still fails?I installed a KB967642 to solve this problembut the problem remains?Can someone help me please?I have vista service pack 232 bitConcerningRiptorn
I just need to use an alarm on my cell phone and if there is one where is it?
Hi experts,I use version 188.8.131.52 and I put the drill return URL in the EBS Source System. When I click on the amount of Workbench, I get an error and the EBS landing page does not open. I am able to open it separately on another tab in the same wind