Pavilion p7 - 15177c: unable to start

Screwed to put an extra Memory Stick.  Put in a stick of evil and now I am unable to boot, the computer gets without any power, it's just sitting there.  Is it fuse in a Pavilion p7 - 1517c?  If Yes, where is it?  I really hope that's it, that is.  Any suggestions would be greatly appreciated.

Hi @64powerwagon,.

Welcome to the Forums of HP Support! I understand that your system is no longer from after trying to install more memory. I'm happy to help you with this.

Assuming that you use the right kind of memory for your motherboard and it was good, I would say from this: desktop HP - troubleshooting problems of power supply.

In addition, you can try this document once you have verified that the power supply is good. HP - computer desktop PC won't start not (Windows 10.8)

Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

Tags: HP Desktops

Similar Questions

  • HP Pavilion Elite m9340f unable to start

    Hello

    My HP Pavilion Elite m9340f is not able to boot, just continues to run away (fires), but shows only an arrow on a black background and sometimes some movements.

    It has Windows 7, 64 - bit.

    Thank you

    Hello

    Finally, after many hours while the computer could not start, although it was by train and running, I did the following:

    1. the stop (press the button).

    2. turn on once again.

    3. press F8 immediately.

    4a through identification procedures.

    5. select restore system to a previous state.

    6. Select the date when the system works properly.

    7 follow the guests.

    This process has been successfully completed and the computer is now able to start properly again by itself (not necessary recovery disc).

    I would like to thank HP support for their initial contribution to this problem.

  • Pavilion dv6 3100: unable to start pavilion dv6 3100 again clone Samsung ssd 850 evo

    Im trying to upgrade the HDD to the SSD.  Tried a Samsung ssd - 850 EVO 500 GB after cloning, using Samsung data migration software.  However, Windows will not start since the new cloned ssd.  I get a black sreen showing, "windows does not have start message and all... and shows--

    File:------Boot\BCD.

    Status: 0x000000f.

    Info: an error occurred while trying to read the boot configuration data. »

    Samsung Wizard is not able to find data on the ssd.  I looked up and gathered a lot of information and did everything I could.  Disk Manager recognizes the device when connected via USB (for cloning).  Device Manager displays the storage as -«IDE...» SATA/AHCI controller... ».   I enabled AHCI in the regedit - the HKEY_LOCAL... Msahci, IastorV, etc.  I also updated all the possible drivers and firmware and BIOS (f29).  Yet once the ssd is connected and placed in the drive Bay, Windows just would not start.

    I'm an amateur, pretendng to be an "expert"!

    Someone please help!

    Ive been away for a few days.  Sorry for this late reply.

    I have treid sfc/scannow - did not work.  Not sure it'll work, I was not ready to move to another

    $50 on Acronis software cloning.  So, in the end, I opted for a clean install of windows7 operating system, using my own system recovery disks that I created previously.

    Every thing looks and works perfectly.  Samsung magician is able to detect the ssd by his real name (and not as ASMT 2115) and also shows that the AHCI is enabled. The time spent was worthwhile.

    Thank you.

  • On a 1100sa Pavilion DM4 how prevents one error message: unable to start Bluetooth stack service?

    I have a HP Pavilion DM4 1100sa, p/n: XE139EAR #ABU, a serial no: CNU1220Z75. I bought it about 2 weeks ago. Shortly after he stopped hibernating when I closed the lid and the fingerprint reader was also very intermittent, also error message unable to start Bluetooth stack service popped up after the computer has been rebooted and after startup of Internet Explorer... My own attempts to remedy that does not so I called your 0844 3690369 number and possibly your man said that the only option was to do a complete restore of the system. For this I made and then reinstalled my commercial software such as M/S Office 2010, Adobe Photoshop elements 9 etc.

    The error (see above) again reappeared and the fingerprint reader was still intermittent, also my Bluetooth mouse is not connected. Yet once, my own attempts to cure these problems have failed, including playback of your pages in the forum, so I phoned again, everything seems to be resolved but the initial problems and the subsequent, reappears.

    So I made an another System Recovery on Thursday, July 26, 2012. I did a full defragmentation and wiped the free space on the hard drive. This time, the only problem that occurs is the error message failed to start Bluetooth stack service. Yet once it appears only after a computer reboot and start Internet Explorer.

    I am very reluctant to spend another hour, or so, on the phone so I want your best and hopefully correct advice on how to avoid this very annoying message from popping up.

    Mike

    We will uninstall the system Broadcom bluetooth driver and that's it.

    We will not install another driver for this device instead.

  • ERROR: Unable to start Bluetooth stack service

    I seldome use features wireless to my pc before, but now that I have the wireless router I frequelty use it. Usually, I turn on the wireless switch and turned off to save the battery. I noticed every time I turn on the radio, after a few minutes, that an error message is displayed:

    BTTray

    ERROR: Unable to start Bluetooth stack service

    I don't know if what is wrong with my laptop. Please if anyone can tell me if what is wrong with this thing. Thank you very much!

    HP pavilion dv6820ee

    OS: Windows Vista editions Home premium.

    Message edited by xXxonins on 12/22/2008 05:27

    Access your product download page and reinstall the software for bluetooth under networks:

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3716846 & lang = in

    then, under network connections in the network and sharing window - see if you have a bluetooth adapter that is listed.  If you do not use bluetooth, you can turn it off or you should be able to set it up properly.

    If fails it then in Control Panel, under administrative tools, Services - locate service BTtray and disable it.

    HTH

  • Windows is unable to start.

    Owner of a Pavilion wa694ua #aba little more than 2 years.  Windows is unable to start.  During windows Startup Manager, I receive a status of: 0xc000000f and info: start the selection has failed because the required device is inaccessible.  What to do next?  I have the recovery disks, but is not no longer works.

    Your hard drive may have failed and must be replaced. Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics to test your hard drive.

  • I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. What should I do

    I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.

    Try this add on the profile folder

  • Unable to start after you run the product recovery disc

    Hello

    My laptop was a dual boot with windows XP SP3 and ubuntu

    1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there

    2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start

    3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop.

    4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR.

    Guys, your help will be much appreciated

    Hello

    > I run and it filled, but now am unable to start my laptop

    Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed

  • Satellite P15-S420: unable to start Windows XP

    I hope that all makes sense... I'm unable to start after the start page of Windows XP. I think I have assumed that the computer turn off when there is no. The battery may have exhausted and when I plugged it back in and tried to start it would not.

    When the Windows start page is in place, it seems that HD works for awhile, but stops and goes no further. I am able to boot in safe mode and have tried to restore with no effect. When I click on Toshiba Manager of power supply in the control panel I get "Policy of NoteBook Load Fail" this could be a problem.

    What do you think???
    Oh, I have a Satellite P15-S420.

    Hello

    In my opinion, this power saver error message occurs because you started the laptop in safe mode. In this case, the OS doesn't use the Toshiba drivers that are required for the use of additional applications.
    You write about the restore procedure. Have you tried to install the laptop with the supplied restore CD? If this isn't the case, then try it.

  • Satellite P200HD-1DV: the error event to the startup-unable to start a DCOM Server

    Whenever I restart it is extremely slow and in my opinion, caused by the following 2 errors that appear in the system as event ID 10000 event log:

    Unable to start a DCOM Server: {7160A13D-73DA-4CEA-95B9-37356478588A}. Error: '2 '.
    Happened at the start of this command:
    C:\windows\system32\igfxext.exe-integration

    Unable to start a DCOM Server: {078AEF33-C48A-49F7-AFF3-A0EE810BFE7C}. Error: '2 '.
    Happened at the start of this command:
    C:\windows\system32\igfxsrvc.exe-integration

    I think they are Intel drivers, but have failed to find a cure for this problem.
    Other than a real slow start it seems no problem.
    Am that I the only one having this problem and everyone know the cure?

    So, you understand where the problem is but why didn t you have installed graphic drivers intel one another? I mean, you know where is the problem and you can correct it.

    Otherwise, if a reinstallation does not help, it would be better to completely recover your system to eliminate the problem.

    Greetings

  • Unable to start bootcamp after partitioning El Capitan

    Lonely HI T,

    I recently partitioned the drive where is installed OSX El Capitan. Now, to press the Option key at startup to the top, I can't select my Bootcamp partition to boot.

    Here's the info re: my product:

    Here is some information about: my volumes:

    • I have OSX installed on a partition 'Macintosh SSD' a 500 GB SSD
    • The files are on a 'Macintosh HD' partition in a 1 TB HARD drive
    • I have Windows Bootcamp installed on a "SOLID" NTFS partition in the same 500GB SSD
    • and another NTFS partition for Windows files "LIQUID" in the same 1 TB HARD drive
    • I also have a new partition (which lead to my problem) "ScratchDisk' in the same 500GB SSD

    Also very "SOLID" and "LIQUID" NTFS partitions are currently read-only that is ' owners: disabled "in disk utility after creating a new partition"ScratchDisk"for Photoshop in the same 500GB SSD and SOLID will not show up to start up after pressing the button 'Option '.

    I already had Tuxera NTFS installed but uninstalled.

    Below you will find the following information:

    • diskutil list
    • Cs diskutil list
    • sudo TPG - vv - r see the/dev/disk0
    • sudo fdisk/dev/disk0

    Thank you for the patience and kindness in advance,

    CESCO

    Last login: Tuesday, February 2, 23:22:10 on ttys000

    Cescos-iMac: ~ list of the Cesco$ diskutil

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 500,1 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_HFS Macintosh 250,0 disk0s2 GB SSD

    3: disk0s3 Apple_Boot Recovery 650.0 MB HD

    4: disk0s4 Apple_HFS ScratchDisk 99.2 GB

    5: Microsoft data base SOLID 150,0 GB disk0s5

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 1.0 TB disk1

    1: EFI EFI 209.7 MB disk1s1

    2: Apple_HFS Macintosh HD 899,2 GB disk1s2

    3: Apple_HFS Recovery HD 650.0 MB disk1s3

    4: Microsoft data base LIQUID 100.0 GB disk1s4

    / dev/disk3 (external, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: FDisk_partition_scheme * GB 500,1 DIS3

    1: Windows_NTFS GB Seagate Expansion Drive 500.1 disk3s1

    Cescos-iMac: ~ Cesco$

    Cescos-iMac: ~ list of cs Cesco$ diskutil

    No logical volume group CoreStorage found

    Cescos-iMac: ~ Cesco$

    Cescos-iMac: ~ Cesco$ sudo TPG - vv - r show/dev/disk0

    Password:

    See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

    See the TPG: / dev/disk0: PMBR to sector 0

    See the TPG: / dev/disk0: Pri GPT to sector 1

    See the TPG: / dev/disk0: GPT Sec at sector 976773167

    start index size summary

    0 1 PMBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 488188328 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

    488597968 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

    489867504 193675024 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

    683542528 262144

    683804672 292968448 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

    976773120 15

    976773135 32 table dry GPT

    976773167 1 dry GPT header

    Cescos-iMac: ~ Cesco$

    Cescos-iMac: ~ Cesco$ sudo fdisk/dev/disk0

    Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

    Signature: 0xAA55

    From end

    #: cyl hd s - cyl hd s id [Start - size]

    ------------------------------------------------------------------------

    1: EA 1023 254 63 - 1023 254 63 [1-976773167]

    02:00 0 0 0-0 0 0 [0-0] unused

    03:00 0 0 0-0 0 0 [0-0] unused

    04:00 0 0 0-0 0 0 [0-0] unused

    Cescos-iMac: ~ Cesco$

    Re: Unable to start bootcamp after partitioning El Capitan

    Please after the release of

    sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

    It will show you the first block of the SOLID wall.

  • HP pavilion 5CD3081TFX g6: hp pavilion g6 5CD3081TFX unable to boot from usb

    My hp pavilion g6 5CD3081TFX unable to boot from usb, since I have to clean install my Windows 10 operating system, when I press f10 after restart it asks password Admin, when I enter the password it shows disabled system? Any solution?

    @Suryakant2015

    Enter: 41694304

    Kind regards

    DP - K

  • Error BTTray: Unable to start Bluetooth Stack Service

    I have an Envy 17 3D (product number: LV045UA #ABA). Recently, shortly after startup, I get an error to the effect that there is a BTTray error as it is unable to start bluetooth stack service.

    I use a Bluetooth Logitech mouse and the mouse continues to work. Befire I started having error, periodically that the mouse could be suddenly disconnected and I must initiate a discovery of the mouse with the Bluetooth discovery mechanism.

    Usually after the rediscovery of the mouse, I would have no other episodes for several days with a new day evey bootup. The error is only a recent development, but the episodes of disconnecting long enough.

    I'm not even sure that the two are linked, and I watch inconsequential number BTTray. However, I want to solve this problem of BTTray error until something of consequence occurs.

    Kind regards

    S.M. Cohen

    Hello

    Please reinstall the driver for Bluetooth module and this problem will be solved.

  • Pavilion dv7-6b32us: that means start diagnosis failure ID QC6C51-5R67HW-QFPH4K-402BO3?

    HP Pavilion dv7-6b32us laptop

    Start-up took like 15 minutes so I did some diagnostics and received a failure id QC6C51-5R67HW-QFPH4K-402BO3

    The operating system could be zero, but not sure.

    What is the error? Can't seem to find anything online. Very much appreciate your help.

    Thank you!

    It seems that the hard drive has failed/is a failure and should be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  • answer me please! Unable to start? Bluetooth stack service! that means this popup

    I got NO help from anyone Thanks much all that you brains out there cannot get a response?

    From the other thread:

    Unable to start Bluetooth stack service? What is this and how do I get rid of him. printer works well. This service is useless.

    Hello! very annoyed with a popup that I said at the top left of the BTty yellow! mark in the middle of the box and the message unable to start Bluetooth stack service, I click OK and it goes away a while tried all my settings are unable to get rid of it. It started when I let a 2nd. or 3rd. part microsoft co. take possession of my pc to difficulty clutter & defragment only HELP get me to pay 149.99 at this time, very unhappy.

    Hi Patgariepy,

    What operating system is installed on the computer?

    You get this error if the drivers are not updated, or if the driver has been corrupted. I suggest measures are:

    Method 1: Bluetooth device driver update. Steps to update the device driver:

    a. click on start
    b. Select Control Panel
    c. Select system and maintenance
    d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)
    e. in the Device Manager, look for the Blue tooth device
    f. click on the driver tab and then select Player update

    Link for reference: updating a hardware driver that is not working properly

    http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

    Method 2: Uninstall the Bluetooth device, restart the computer and install the latest drivers.

    You can even check out the link below, which will set the Blue tooth device: point of Bluetooth in Control Panel on a Windows Vista SP2 does not work as expected when you click the http://support.microsoft.com/default.aspx/kb/960531elementNote: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

    Keeps us up-to-date on the State of the question.

Maybe you are looking for