Pavilion: seeing the power button

Whenever I turned off my laptop, the power light turn off every time. He died 1 in 10 times. Rest of the time it stays on and if I don't notice that all the battery is consumed.

I have to press the power button to turn off most of the time after giving the stop option

Dear customer,

Try the following.

Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

Once the installation is complete, restart the laptop.

When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

Tags: Notebooks

Similar Questions

  • Help - HP Pavilion a6030.uk desktop computer. Have to press the power button several times to start?

    Hello

    I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.

    My computer has had no problems at all until yesterday for some reason, I had to push the switch several times to start until he finally turned and did normal starts. As I would press the power as normal to start button, but all of a sudden, it turns off after about 2 seconds and so I would tap on the switch several times and each time it will not start and turn off, then the power button could be pressed again until it would finally turn on and start and run as normal and seems to work correctly. And it was the same thing today, I pressed the power button mutiple times (for example 6 times) until she finally started as usual.

    Savvy/computer im not very well informed or wise in this area, please someone will help me and give me some advice/help to fix/resolve this problem.

    Thank you for taking the time to read this and any help would be appreciated for this problem.

    Thank you.

    Vonbon90, welcome to the forum.

    When I see these symptoms on an old computer, I think it may be a power supply (PSU) failure/ing.  Here's a guide that will help your troubleshooting it.

    In addition, you could test the memory.  This can be done by removing all modules of memory and replacing them one at the time and start.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • I can't see Start button and have to turn off my computer using the power button / stop

    When I use Mozilla, I can see no longer the button 'Start' at the bottom left of the computer. The only way that I can disable the computer is holding the "Power" button What I did to cause this.

    Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

    If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
    Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  • HP Pavilion DV7 laptop: Touchpad, sometimes active, even when the power button is pressed on off (light orange)

    I use a wireless mouse (or a wired mouse) preferably instead of the touchpad.   The touchpad has a power button to press - white light indicates on and off Orange light.    After booting, I usually disable the touchpad and mouse wireless, however, sometimes when you type I realize my palms are contacting the touchpad and the cursor jumps around accordingly.    The touchpad is disabled (orange light) but I can control it with a finger, it works like its supposed to as if it is enabled.     Any ideas?   I have not downloaded a driver updated or do anything to try to solve this problem, as I fear, it could actually cause other problems.

    Update the driver it is the usual Council for problems - that is the solution here?   Has anyone else had a similar problem.    Most of the touch pad problems I've read is in regards to an erratic touchpad - nothing to do with 'on' or 'off' problems.

    HI @WayneCM,

    Thank you for your inquiry. I will do my best to help you!

    I understand that you use the power button / stop to turn off the touchpad.  Sometimes, you will notice that your palm is in contact with it and the cursor is accordingly jump around but the rest light orange, to show that he has disabled.  Here is a link for HP Notebook PCs - using the touchpad and ClickPad (Windows 10). Please review the section on "Open the properties of the ClickPad" in figure 4, you'll see there's a button where you can disable the touchpad, until you want to reactivate it. Please let me know if this helped.

    Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on ' Thumbs Up ' to give me a Kudos.

  • Pavilion 23xi: my hp Pavilion keep showing the power button lock I tried all the solutions again, it won't work

    Hp power button held for a minute and the cord broke off electricity by holding down the power button and it's always the same problem in not falling is not on what can that I please

    The button lock feature works / stop is set by pressing the power button for 10 + seconds.  It is deactivated again by pressing the power button for 10 + seconds.   That's all there is to it.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

    It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

    I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

    If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

    Thanks for your help.

    Damicon999 wrote:

    Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

    no chime, black screen, that's all.

    I don't think they are infected.

    The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

    No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

    In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

    Genius of booking http://www.apple.com/retail/geniusbar/

    Online https://getsupport.apple.com/GetproductgroupList.action

    check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • PAVILION 23-P110: how long I hold the power button to get it started?

    HAVING PROBLEMS TO START THE COMPUTER. IF I I PRESS AND HOLD FOR MORE THAN 5 SECONDS, IT DOESN'T SE CHARGE NOT AT STARTUP. IF I PRESSED FOR TWO SECONDS, HE DOESN'T SE CHARGE NOT AT STARTUP. SOMETIMES IT STARTS UP TO THREE SECONDS AND A MILE.

    IT IS A WACKY WAY TO BOOT A COMPUTER.

    Thank you. I'LL WAIT TO ANSWER.

    Good night.

    Happytohelp thanks.

    I continued to play with the Start button. I discovered that if you are an onthousand and then let the power button starts really well. So I'm sticking with this method, and I like it.

    Thank you once again.

  • TouchSmart 610: TouchSmart 610 lights. I have a set of 5 beeps with a yellow light above the power button.

    I keep my office earlier this morning with the entry of the normal shutdown process. When I went to reactivate tonight all I get is a set of 5 beep with a yellow light flashing above the power switch. Repeat this five times then beeps stop and only yellow continuous flashing. I can hear and feel the hard drive running. I tried to unplug the power supply and then plugging, but the same thing happens. If I push and hold the power button on, it sounds like the hard drive stops and restarts. The normal blue light comes on for a few seconds then turns off and is replaced by the yellow flashing light. All you have no idea as to what may be the issue?

    Hello:

    Normally 5 beeps means there is a problem with the memory.

    I suggest that you remove and reinstall the memory modules and blow up if this doesn't fix the problem, if your PC has two memory modules, an and see if the beep disappears.

    If this is the case, remove this module and specify the first condition in you removed and if the beep begins once again find the defective memory chip.

    If it is not, remove the module and put the other in you deleted and if the ringing stops, you have found the faulty memory chip.

    Then replace the faulty memory module by one with the same specifications.

    If the ringing continues despite trying these steps, and then either the two chips of memory are bad (unlikely), or the motherboard has a problem.

  • I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading

    I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading

    Hello

    Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.

  • Symbol of the three discs stacked to the left of the power button on the front of the CPU

    Pavilion p7_1070t CTO desktop PC

    What is the symbol on the left of the power button on the odf before the CPU?  It looks like three stacked discs and a light under the symbol flashes?

    Hello

    It's just a visual indication of when your drive is reading or writing data - so if it flashes quickly this would indicate a lot of hard drive activity, less when the LED flashes slowly.

    Kind regards

    DP - K

  • HP Envy 700-214: Message "locking of the power button.

    I am getting an intermittent box appears which says "Power Button lockout".

    Tour: HP Envy 700-214 with two display monitors

    Monitor 1: HP 2010 (DVI)

    Monitor 2: HP L1950g (VGA)

    Windows 8.1

    Periodically this box appears on the monitor 1.  Sometimes the monitor turns off.  When I turn it back on, I'll get a surveillance area of the State, which opens by saying:

    DVI: assets

    VGA: No Signal

    1600 x 900 60 hz

    Which is curious since the monitor that is upward is the DVI monitor.  However, this box disappears after a few seconds.

    Is the problem with my video card in the computer, or is it with the monitor?

    [ETA]  I stopped and restarted the computer and the monitor and held the key monitor more than 10 seconds, as suggested in other posts found here on this site. [/ETA]

    Thank you very much.  Please let me know if you need more information.

    Hello @GaryLynnMass,

    I understand that your computer displays an intermittent "power button locked" message is displayed on your monitor, and I'd be happy to help you in this case!

    To avoid this message in the future, I recommend to take a look at the position of Big_Dave How can I turn off the lock on my HPw1858 monitor switch?

    If the problem persists, I recommend following the steps below:

    I provided you with a few steps, you can try below:

    Step 1. Unplug the power cord at the back of the screen and the wall
    Step 2. Press and hold the power button for at least a minute
    Step 3. Plug the power cable in the monitor, and then to the wall outlet
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the factory reset option and select
    Step 6. Try a different cable to connect your monitor to your computer

    If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Thanks for posting on the HP Forums. Have a great day!

  • Always need to disconnect, press the power button for 10 seconds wait...

    I bought an HP computer for a few years (Pavilion a6695it), it still works well. But these days, I can't pitch up. I tried the power button on the front of the computer, nothing happened. Then, I searched hp's site. finnally, I find this article http://support.hp.com/us-en/document/c00241069

    In the version English, the article is here:

    http://support.HP.com/us-en/document/bph06788

    Power light is on or blinking

    Hello youlichika,.

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you are not able to on your desktop, and I'd be happy to help you in this business!

    According to the document troubleshooting problems of energy supply, were you able to follow the steps 3 to 9? If so, what were the results?

    If you came at the end of the document, and always empty the power of the computer to turn on, you can find a spare (5188-2627) through one of the sites available by following this link.

    I hope this helps!

    Best regards

  • Satellite L550-1CW does not start by pressing the power button / stop

    I have a Toshiba Satellite L550-1cw that won't start, lights up when I press the power button all the lights at the front, the fan starts and he is looking for a HARD drive for about 2 seconds and then stops.

    I tried a new HARD drive, but the same happens.
    I was told that all this must be ignored and buy a new one that is not an option.
    I love this laptop and want to run again as this is the best I have ever owned.

    Help, please

    Andrew

    Can you give us more information on this vulnerability?
    You see something on the screen after pressing the power button?
    You can access the BIOS by pressing the F2 key immediately after switching on the device?

    Despite this whole issue, I think that if nothing is visible on the screen it could be a serious problem with one of the following: RAM modules, motherboard, CPU/GPU.

    From my experience the RAM memory modules are not very expensive (2nd hand might be good enough) and the replacement isn t very delicate in the case where the faulty memory causes this problem, the laptop could be set for a little money.

    But in case of problems of motherboard, laptop repair procedure could be very expensive.

  • Satellite A200 23W stop seconds after pressing the power button / stop

    Hello all :)

    I just bought a laptop Toshiba Satellite A200 23W a few hours ago.
    I turn it on and let it complete the installation of Vista.

    After the installation of Vista finishing it asket to resturn laptop and from that moment, the laptop is "dead".
    After pressing on restart the computer (from Vista) computer turns off without problem, but he never did it again!
    After a few minutes of waiting, I tried to start it by pressing the power button.

    Now when I press the power button, I can hear the HDD work and most of the time until I see something on the screen of the laptop computer stops!
    Now, I noticed that both the battery indicator AND the DC IN light are hot flushing and stop Flash at times.
    Reading the manual, I guess that the DC IN indicator should Flash in all not well.

    I tried to uninstall the battery and try to start the laptop, but in this case I can't even listen to the HDD, commissioning!
    I try to unplag and replag (on the laptop as well as Jack) power cable but again no result.

    Any ideas of what past?
    Thank you very much

    I don't know what the problem is here and, in my view, should not be so important to you. Contact your dealer as soon as possible and to talk with him. Explain the situation. You will get may be new notebook. Otherwise, please contact the nearest authorized maintainer and let check your laptop.

    The laptop is brand new and it should work. Please do not wait too long.

  • Satellite L650 does not start sometimes the Power button

    Sometimes when I press the button works / starting the fan of laptop and the laptop does not start.
    However when I press once again lights up.
    This does not depend on how long you keep holding the power button so that it starts.
    Anyone facing this problem.

    Thank you.

    What exactly do you mean by does not start?
    Is this means that the laptop has been closed or has been set to standby or hibernation mode?

    Are you able to see the Toshiba start screen when you switch on the device?
    If fans hang on this means that the laptop has been put under tension, and then you the OS should start to initialize.

    PS: usually it s no matter how long the power button could be pressed. Briefly press (1 sec) should turn on the laptop.
    But if you do not want to power OFF using the Notepad works / stop, then you will need to tap more long time 4 sec long but it is not recommended that this reset should be made only if the OS hang

Maybe you are looking for

  • When Windows 8 color of the window is set to black, tab inactive headers are invisible

    Hello My Firefox browser was simply updated, and now I can't see header inactive tab text. This is because I use the black color for windows in my Windows 8 operating system (see the screenshot https://onedrive.live.com/redir?resid=7B6F4C0CAADD954A!

  • Q10 IMAP work not blackBerry

    Hi all I just upgraded to 10.2.0424. Since upgrading my email imap accounts no longer work. When I go into settings all say not connected. When I select one it says that an unexpected problem has produced with - some features doesn't work maybe not p

  • Why windows live mail doesn't stop me to set up my gmail account using pop

    I am trying to access gmail via Windows Live mail 2011. However, I am not able to set up Gmail account in windows live mail using pop. A message prompts me to use the IMAP protocol. Why?

  • Windows 7 is not remember login username

    Hi all I'm having a strange problem with connections windows are not known. Whenever you log out or restart, the windows login page is empty and he doesn't remember the last user who has logged in. Local group policy has been disabled, if im not sure

  • Update LR 6 bought a copy to CC

    If I want to CC I have to uninstall first LR6, also my current LR6 library will transfer to a new version please