Pavilion slimline s5-1014: CD rom is not working after upgrade Windows 10

Similar Questions

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• HP Pavilion dv4 Notebook PC: touchpad scroll function not working after installing windows 7 (64)

  After a complete hard drive failure, I installed Win 7 everything works, as far as I know, except scrolling on the touchpad. I went through all the troubleshooting I can find.  The last one I tried was in the Control Panel, mouse and look for the details of the touchpad. It is not listed there.  I can't find a driver to install HP and Driver Downloads. Where can I find a driver for the touchpad with scrolling? The only thing listed under the mouse in the menu of device driver is a PC mouse.

  I'm sorry that the link of the page didn't work.  HP has problems with the website support, and even for me at times, page links do not work.

  As for the installation of Windows 9, how to acquire that is to order the HP recovery media. It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP.  You get these by contacting HP Customer Service.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.

  I'm a volunteer and I do not work for, or represent, HP.

• Icon editor does not work after upgrade Windows 10!

  Hi all

  I'm using LabVIEW 2014 SP1 and I have recently upgraded to Windows 10. After this Icon Editor is not working properly, I can see only limited functionality.

  Atttaching the video.

  Please help me.

  Kind regards

  Rajesh

  Sam Merci for your support!

  I solved the problem, I debugged the '... \LabVIEW 2014\resource\plugins\lv_icon.VI ' and found that the error was generated when accessing some files in the folder of the administrator. It seems to be permission/security problem. Now I'm running the LabVIEW as an administrator and it works correctly.

  Thanks again Sam.

  Kind regards

  Rajesh

• Pavilion 23tm: 23tm Pavilion touchscreen does not work after upgrade Windows 10

  After the upgrade to Windows 10, my monitor touchscreen Pavilion 23tm lost touch.  I looked for a driver on the HP site and it required me to download the HP Support Assistant application.  In other words, the site would not just download an update to the driver.  After you download HP Support Assistant and running this application, he did not find the Pavilion 23tm monitor, then I hit a dead-end.  I think I just need to be able to download the latest driver, but the HP site will not allow it.

  Hi there @jazzquilt,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your touchscreen after that upgrade to Windows 10 and that you have installed the HP Support Assistant for help, but the problem remains. I'm happy to help you.

  The research of the model of the screen, I found a driver Windows 10, below the link. Give it a try, if you have not already.

  HP 23tm LCD Monitor - driver Windows 10

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite L500 - FN keys does not work after upgrade windows 10

  Good afternoon

  I just upgraded to 10 Windows on my Satellite L500 and have noticed that none of the FN keys work.
  Is there a driver that; A is available and B where it can be downloaded.

  Thank you

  Usually Win 10 drivers can be downloaded here but only to win 10 supported units
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Unfortunately, the L500 is not listed a Win 10 supported phone model.
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Audio does not work after upgrade Windows 10 (Lenovo G780)

  After my upgrade to Windows 10 on my Lenovo G780, it seems that my audio no longer works. I tried plugging my headphones as well to see if I had audio coming through here, but it does not appear in the peripheral reading window when it is plugged.

  The laptop comes with Conexant SmartAudio HD and lists also high definition Audio device in Device Manager.

  Could someone help me and let me know if there is a problem that I monitor.

  I found a page that contains some Conexant software for windows 10 but I don't know if they are updated drivers or if they support even my machine (the page does not support for G780 list).

  Any help would be appreciated. Thank you.

  After a few tries, I finally got my audio to work and hope it does for you too. What I did close my computer completely as opposed to stopping in the hybrid stop mode. To stop your computer completely, right click on the Windows Start icon and scroll down until closing or disconnect and select stop down in the list. Your computer shuts down completely. Turn on your computer again (start will take a little longer than usual) and check if everything is in order.

  As I mentioned earlier, my audio back after doing this. It will be useful.

• Sound does not work after upgrade Windows 8.1

  No message error, everything works well according to the pc.  Tried install drivers updated but made no difference.

  PC Pavilion P6-2494ea, pregnant are in the monitor.

  Thank you for the information.

  Here is a troubleshooting guide to help you solve the problem.  Read it carefully and follow the steps suggested and let me know what happens.

• Windows 7 backup does not work after upgrade Windows 10 and Windows 7 restore

  I am on Windows 7 (Win-7) for several years and I'm quite happy for Win - 7.

  Microsoft has improved my Win 7 to Win - 10 at night. I refused the upgrade and Microsoft restored Win 7 on my computer. Win - 7 works very well except the backup.

  The backup is not one that I used previously.

  PIC - 1 appears when I backup implementation.

  PIC - 2 appears when I press Next

  PIC - 3 appears when I press Save

  How to restore the backup of Win - 7?

  PIC-1

  

  PIC-2

  

  PIC-3

  

  You have not answered my previous message.

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  Please download and share with everyone a new copy of your log applications of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the Application log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window expand Windows logs and select Application. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• On Toshiba M505-S4940 computer microphone laptop does not work after upgrade Windows 7...

  I bought this laptop in July and it came with a free upgrade to Windows 7. Until I upgraded my cell phone, my microphone worked fine, but since I installed Windows 7, the computer does not recognize the microphone as a device. I looked for answers on the Web from Toshiba site, but nothing has worked. What is the problem with my microphone?

  Hi jillibeans34,

  Thanks for posting. Here is a link to the drivers of Toshiba. Download the sound and drivers of Toshiba Speech system. If you're still having problems, please contact Toshiba to see if they can provide you with the correct drivers.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=2346345&RPN=PSMG2U&modelFilter=M505-S4940&selCategory=3&selFamily=1073768663

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Color LaserJet Pro 400 M451dw: automatic duplexing of color M451dw LaserJet Pro 400 does not work after upgrade Windows 10

  
  

  This seems to be a problem with the printer driver, so uninstall and reinstall should be attempted.  You can use the latest version of the complete software available for download on the following HP web link:

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462&swLangOid=8&swEnvOid=4192

  Other possibilities are related to problems due to the unsuccessful upgrade OS or related aspects should also be checked

• LR cc developmodule do not work after upgrade Windows 10

  after upgrade Windows 10 development screen freezes and I have to restart LR

  I love a piece all about the problem on the adobe Web site. I have a graphic processor of AMD radeon HD 7500 series and manually turn off the processor resolved the LR crashes.

  Thanks for the reactions

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?