Pavilion slimline s5-1015uk: Cyberlink

Similar Questions

• HP Pavilion Slimline s3720f: what video card should I buy?

  I want to add a new video card (not too expensive) for my old HP Pavilion Slimline s3720, but I do not know what video card to buy, because there are far too many choices. I know that the new card must be low profile with a half support so it can fit into the currently available in the motherboard slot. I hope that Conect my Dell UltraSharp 1708FP 17-inch LCD flat monitor VGA on this new card to get the best resolution and graphics. Can someone give me a recommendation indicating which card to buy? Please be specific. Thank you.

  The slimelines should never require a lot of video.  Your 2008 model circa was Vista.  Updates drivers ended with WIN 7. It's a miracle you got WIN10 without drivers available is another story.  Another factor is the skinny 160W PSU. That limits your options if you have a.  The common consensus is that either.  added heat from a graphics card, the likely additonal to a new power supply really outweighed costs.

• HP Pavilion Slimeline 400-224: upgrade memory on Pavilion Slimline 400-224

  I want to upgrade the memory of my HP pavilion slimline 400-224.  After opening the case, how do I determine how many memory locations is available?  The current Council of the memory is SK Hynix 4 G 1Rx8 PC3L 12800 S-11-13 - B4.   It seems to be another location, just underneath and take-away.

  

  Can you tell me if this machine has one or two slots for memory...  Any help on this would be greatly appreciated.

  Thank you

  Here are thespecifications of your machine. It allows two modules of 8 GB.  You said 4 GB installed.  Which would jive with your Visual (only 1 modules installed). If it was mine, I would opt for a corresponding module of 4 GB and do with it.

  HP PartSurfer does not list the SK Hynix 4 G 1Rx8 PC3L 12800 S-11-13 - B4.  Another curious point, the specs list 6 GB installed. It would be a 4 GB and 2 GB modules.

• HP Pavilion Slimline s5510y of: No. Wireless Network Adapter installed

  I just bought a Pavilion Slimline S5510Y Desktop opportunity; not an installed wireless network adapter.   Y at - it somewhere that I can download the map?

  Here is the PAGE of SUPPORT for this office.  It doesn't have a wireless adapter.  It has a wired aka the installed ethernet card.  The wireless adapter is a piece of hardware and must be purchased, not downloaded.  There are choices in the type would work better for you - USB or PCI x 1.  It may depend on the type of network you want to use.  The new highspeed options may require an adapter corresponding to the specification of network router in order to achieve faster speeds of the AC.  If you look at the "n" speeds then most can do.  Also be aware of the bands 2.4 and 5 GHz for newer routers.  If all this sounds "Greek", then perhaps seek help from a friend.

• Pavilion Slimline PC 400-034: network driver

  Hello

  I'm looking for a driver for the CARD from Windows 7 for the network interface port in the PC of HP Pavilion Slimline 400-034.

  I'm trying to configure this computer to an old man who does not want to learn Windows 8, Windows or Windows 10 8.1.  It has been very well with Windows XP until his old computer is dead.  Now I'm creating running it with this Slimline 400 computer, Windows 7.  I installed the WIFI drivers.

  PLEASE, PLEASE, PLEASE; Do not answer me with a hyperlink to the web site H - P driver download page.  I've tried, and H - P has only the options Windows 8 and *. 1.  He doesn't like the fact that I want to put Windows 7 on this computer.  Please tell me the NAME (or the MS code) network driver and I'll go find it on the internet (Yes, that seems to be the fastest way) without due respect to the people of H - P.  I need the driver for the CARD.

  Can someone point me in the right direction?

  Thanks in advance!

  Hello:

  Here is the link to the ethernet driver, you must...

  This package provides the original driver for Realtek PCIe family network controller solutions in the supported models that are running a supported operating system.

  File name: sp57359.exe

  If you need any drivers for this PC, please let me know.

• Pavilion Slimline: upgrade to MS10

  I upgraded to MS10 and now my graphics (JUA190) does not work.  I was told that HP does not support the new driver to get my card to work.  I bought this computer before 2013.  This HP can be upgraded to accept the new adapter?  Currently, my Manager shows the basic graphics card.  How to add or change this, if I can.

  Golf buddy

  golfingbuddy

  Thanks for providing the info.

  I wish I had some good news for you, but I did not.

  HP does not provide more recent than Win7 for your PC drivers, so there is no updated HP driver to fix the problem.

  Here is the link to the page of the drivers for your PC: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-Slimline-s5500-Desktop-PC-series/4162194/model/4206331

  To see the drivers for Win7, click change and select Win7 in the menu drop-down.

  You MIGHT be able to install the video drivers Win7 using compatibility mode: http://www.windows10forums.com/articles/compatibility-mode.7/

  Good luck

• Pavilion Slimline s5780t: compatibility Windows 10

  Hello

  I have a friend with the model listed above. It was recently upgraded to Windows 10 (translation: Microsoft forced the upgrade on him without his consent). His PC was working fine before the upgrade, but since then, he has been presenting all kinds of different problems.

  Before you start to look at the details, I just wanted to know if this model of PC is compatible with Windows 10 in the first place. I came across the site of HP in the hope of finding this 'picture' of the models tested, but have not been able to find it anywhere.

  Could someone be tell me if the s5780t flag has been tested with Windows 10 or direct me to where I might find myself?

  Thank you in advance.

  Hello:

  HP does not support this model for W10, and there is no W10 driver for it on the support page.

  Here is the link for the product... it's 2011, which is older that the deadline for what tested HP of the PC for the W10.

  http://support.HP.com/us-en/product/HP-Pavilion-slimline-s5700-desktop-PC-series/5035352/model/5060992/document/c02682452#AbT0

  Here is the link to HP on compatibility with W10...

  http://h22207.www2.HP.com/us-en/document/c04731185

  This PC must be able to run W10 OK on the basic material.  I have two HP business class PC with Sandy Bridge CPUs and chipsets, and they work fine.  Audio different chips well (Realtek).

  Now if this model has a tuner TV and other optional devices, those who can not work.

  The Beats Audio may not work... However, try this driver W10.  It works on many HP PC with audio IDT bat.

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

• HP Pavilion Slimline s3315.uk graphical update

  My children have a HP Pavilion Slimline s3315.uk but I must improve the graphics cards, but don't want to spend too much. I was wondering if the ATI Radeon HD4650 1 GB DDR2 VGA/DVI PCI Express can be a good option. Any ideas?

  John, no, the HD 4650 requires too much power for your power supply unit (PSU).  It does not say in the specifications of the computer, but I think that the power supply is 180W to 220W.  The 4650 requires a minimum of 400 w to work properly.  In addition, the computer requires a low profile video card.

• HP Pavilion Slimline s7000n PC: HP Pavilion Slimline s7700 recovery disk for proclaiming

  Hello I clear my system using what I've been though a restallation vista drive. I used "RepairOS fixing system for all computers Boot CD Windows" I thought that he would return to the reset to factory, but instead, he destroy everything. How much would a true drive Installation HP Pavilion Slimline s7700n cost. It will fix anything I missed upward.

  I am pleased of this drive I bought is allowing me to connect using Linux, which I hate because I have no time to learn all the new things.

  P.S. I installed XP on my system, but I'm not able to connect because of all the drivers are missing or XP does not work on this HP Pavilion Slimline s7700n.

  Help, please.

  Contact HP if the recovery discs are still available.

  If you live in the USA/Canada, call this number...  1-800-334-5144.

  If you do not live in the USA/Canada, call the support number HP business PC for the country where you live.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/b usiness_desktops/6005us_332630_007.pdf

  If HP does not have them, they can be acquired from computer surgeons you exact model:

  http://www.computersurgeons.com/search.aspx?searchTerm=s7700

• Can I put the Pavilion Slimline 180 Watt power supply to a 300 Watt PSU

  Of course, you can!

  Here is an informational videoabout the possibilities of upgrading your slimline WHAT PSU found on YouTube.  A comparison of three power supplies, including the owner HP PSU and a (two video and CPU) stress test and comparison of noise is shown during the video.

  Be aware that some, but not all, of the PSU, upgrades require a simple and light your PSU slimline support change. Change depends on the power supply model chosen for the upgrade.

  Purchase an adaptor molex as HP UPE is necessary for the Slimlines using a power supply with the format owners microfit ATX 24 pin, as well as the standard for the HTPC power supply ATX 20 pin format.

  Upgrade your power supply at a higher power will not damage your motherboard. A power supply will provide only so much power that is required of him by the mother and peripheral card up to the nominal power of the installed PSU.

  It is for those who wondered how to work around the limitation of the low power 180 Watt power supply that most Pavilion Slimline PCs come with the Assembly. With a power SUPPLY improved, more memory and a graphics card discrete, including support (it is a requirement) your Slimline can be your gaming PC.

  Selecting a graphics card is another topic. Not all graphics cards can hold in the case of a slimline. It takes a low profile video card. They are available for purchase online.

  Kind regards
  ERICO
  Published by erico on 15/11/2009 13:17

  Bravo for Erico 1,000,000,000. Great post. Debunks many myths and the hearsay rule.

• Pavilion Slimline s3330.uk Compatible with W7

  Hi all. This is my firsy station, so I apologize in advance any slides in the Protocol.

  I currently have a HP Pavilion Slimline s3330.uk, which originally shipped with Windows Vista loaded.

  The single harware which has been upgraded is the RAM that is now 4 GB.

  Please could you tell me if this PC is fully compatible with the o/s W7 and, if not, what would be needed to do so?

  Thanking you in advance.

  Best wishes

  Harold H.

  Hi, Harold:

  Looking at the hardware on your PC, it must run W7 very well (but not sure 100% on the card reader).

  You will need to use the W7 drivers from the websites of RMP of component material individual because HP does not officially support your model for W7.

  You can also run the W7 Upgrade Advisor free with all connected devices (printer, scanner, etc.), to see if they can also work on W7 as well.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

• HP pavilion slimline s3632me graphic card problem

  It's my computer: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01552288 & lang = to & cc = us & conte...

  my graphics card has a fan that is not working, and I don't get any signal on my monitor after 20 minutes of start... so I decided to get a new graphics card which is better.

  so I want to know what is the max graphics card that I can put in this computer and should I go for the same type (AC express graphics card) or get any type that can work with the computer?

  Here are the specifications of your HP Pavilion Slimline s3632me desktop computer and its card mother M2N61-AR (Acacia). Based on the specifications, this model has a power of 160 watts, a graphics card NVIDIA GeForce 9500 GS PCIe x 16 HDMI and DVI - I outputs and integrated nVidia GeForce 6150SE graphics with a VGA output. Note that the discreet graphics card and the built-in graphics card is not usable at the same time.

  You need to replace the graphics card NVIDIA GeForce 9500 GS PCIe x 16 with a x 16 low profile PCIe graphics card (the card must have a power system recommend assessment of 160 watts or less). All purchased card that has a higher recommended system power supply requirement will require the purchase of a new power supply, follow the recommendations in cards. Your computer's power supply is not a standard ATX power supply and can be difficult to find.

  Please send Bravo

• Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

  Hi all

  Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

  Win 7 64 bit

  HP Pavilion Slimline desktop computer

  Help!

  Update: I did troubleshoot a HP check and update driver.  The screen messages

  USB root hub: this device does not work correctly.

  The current tab:

  Generic USB Hub (6)

  1 port available

  Power required: 0mA

  Solved.

  I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

  I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

• HP Pavilion Slimline s5-1200z: HP Pavilion Slimline s5-1200z CTO Desktop PC Blu Ray drive replacement

  I need a rewritable BD/DVD/CD player replacement for my HP Pavilion Slimline s5-1200z CTO desktop PC. Is there a part # where can I order a replacement?

  CTO build page is referring to a x 6 or drive Blu - Ray 8 x, theHPPartSurfer page refers to these:

  504941-200 8 x optical drive to read Blu-ray (BD) DVD + RW SATA SuperMulti HD - LightScribe

  DVD 504941-801 - 6 x / 8 X BD-Writer XL nLS BE JB ECO

  As noted, the BD-Writer is 504941-801.  Just Web search for this number.

• HP Pavilion Slimline s5-1414 connection LCD monitor & projector problem

  I bought a HP Pavilion Slimline s5-1414 with Windows 8, for my church, which came standard with 2 DVI ports. I attach a LCD monitor to 1 Port and a projector to another. Start the computer and both screens remained blank. I disconnect me the projector, restart the computer and the monitor running normally. I then connect the projector in the other port and it works as expected. However, when I restart the poster blank rest until I have do as above. I also reset the BIOS to the default settings, and both screen and projector came fine. Yet once, when I restarted, same problem. I manually set the resolution for both devices. Problem remains - every time that I reboot, displays may not run until I disconnect the projector, reboot, and after successful reboot, reconnect the projector. Any suggestions?

  Thank you for running these tests and getting back to me. I think that it is prudent to exclude at this stage of material. I have two options for you to try.

  I would like you to reinstall the graphics driver.

  Press the Windows key + Q to bring up the search

  Type 'unit'

  Click on Device Manager

  Expand graphics cards

  Double-click Intel

  Click the driver tab and click the uninstall

  Restart the computer

  Windows will automatically detect the missing driver and reinstall it on reboot. Once you are in the start screen of Windows, shutdown, connect two screens (a screen and a projector or two monitors, anyway) the computer turn on and I would like to know what the results are.

  I would also try both screens set before to turn on/off mode safe. You may need to press and hold the ESC key lighting to get the option come up, instead of SHIFT F8 as set out in section. Take a look at this article to get the procedure start mode safe. Let me know what you find