Pavilion upgrade 500-314

I recently bought a 500-314 Pavilion and need to update the graphics card. I have a Geforce GTX 650 (GDDR5 1024), but food does not support connections required power or voltage required. I would like to upgrade the PSU for the 6-pin PCI express of Assembly desired and minimum power 400W. Seeking the Thermaltake 450W http://www.thermaltakeusa.com/products-model_Specification.aspx?id=C_00001967 but do not know if the deminsions can be inserted.

First of all, this power supply specifications are not good, second, it is a 430W.   70% return.  That a single 6-pin PCIE, and the 12V is distributed on 2 rails.  Better this power supply. It's 80% +, and has a single rail.   Are either an exact adjustment, but the Corsair is better.

Tags: HP Desktops

Similar Questions

  • HP Pavilion graphics 500-314

    Hi I have HP 500-314.  My son likes to play world of Warcraft, and now the screen is grainy when he plays it and hsays it is only between 1 and 25 FPS...  Can I get a better graphics card to put into the computer and if so can I do it without upgrading anything else.  The computer is used only to go online and World of Warcraft.

    Hello

    One of the models MSI NVIDIA GTX 750 below should work.

    MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF 'TI' model can be a little better at the game.

    If you do not find the exact models are NewEgg then try Tiger Direct, Amazon or google.

    The HP posted items below can be useful if your PC comes with Windows 8.

    HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  • HP Pavilion PC 500-314: how drop/reject the upgrade to Windows 10 permanently?

    How to stop 10 Windows to move or even to download on my computer? Is there a place where I can get out of this so-called "upgrade"? Thank you.

    Hello

    You can check the freeware "Never10" described in the following article.

    http://www.howtogeek.com/228551/how-to-stop-Windows-7-or-8-from-downloading-Windows-10-automatically/

    Kind regards

    DP - K

  • help HP Pavilion 500-314

    I just bought hp Pavilion 500-314. I followed the setting up guide that showed all the connections. I just read that you should not connect internet before completing the initial installation. I equipped with computers connected to the internet. I have to reset it and start over with not connected to the internet, or everything will be ok, as is?

    Hello

    I always put in place new PC with Ethernet connection active.

    You should not have any problems and will not have to re-run the installation program.

    Jaco

    I'm not an employee of ch *.

    "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

    HP products:
    Retrograde 810-150se (Win 8.1) office in Win 7
    17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
    H8 1380t CTO Office (Win 7)
    560z Desktop (Win 7)

    Other PC:
    Laptop Dell Inspiron (Win XP upgraded to Windows 7)

  • Pavilion 500-314: Reinstall not destructive

    I am trying to perform a non-destructive reinstall of Win Home 64 bit on my 500-314 Pavilion 8.1.

    Since HP does not provide Windows installation floppies, and this procedure can be done recovery disc, I did a USB bootable Microsoft support Web site.

    The problem is that, once started, it tends to cling on one screen. I had the process works correctly once but be cause that I stupidly tried to do something else at the same time, I had to take off to the resettlement. Since I had to restart, I have not the option reinstall back screen.  Now when I start again from the USB key, reinstall it starts but clings to the screen "Ensuring you are ready to install" instead of the option on which screen reinstall to perform. I tried waiting for that step to continue, but after 6 hours, I decided it was certainly stuck (it happened several times). I tried several reboots, but that doesn't seem to help. It gets to the screen of tht and then stops.

    I ran the installer as an administrator, so this isn't it. I made the media twice so this isn't it.  Any ideas why installation does not now (same thoough it once)?

    PS no, I buy the installation diskettes not factory win 8.1, since I will be upgrading to Windows 10 once the bugs are developed in a few months.

    You are of course, right, on the difference between a repair installation and update - and I wish MS had done it much clearer to people because their general information leads people to assume these are the same, and when they do a refresh and lose their applications, they are very angry!

    ========================================================================
    If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.

    I'm a volunteer and I do not work for, or represent, HP.

  • HP Pavilion 500-314: IDT High Definition Audio works do not (HP Pavilion 500-314)

    Hello.  I have a HP Pavilion 500-314.  It works on Windows 10.  My audio worked fine until I had to reset the computer after my computer went into a loop of "prepare the AutoFix.  Once I reset the computer, there was an 'x' next to the small speaker icon in the lower right corner.  When I move my mouse over the "speaker" icon, he says "no speakers or headphones are connected.  It drives me crazy that the other posts about the IDT High Definition Audio did not work.   I would appreciate a quick response.  Thank you for your time.

    Shayna - Ghram-Kaiser

    Hello:

    Given that I don't know what other posts read you about it, what works for most forum members is to install the audio driver IDT W8.1 support page and the driver of your PC.

    This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported. -Provides the models of desktop audio driver version and supported operating systems.

    File name: sp65946.exe

    If you have already done this and it has not resolved the problem, unfortunately I don't have any other suggestions for you to try.

  • HP Pavilion 500-314: big problems by adding an external video card

    You are looking for assistance.

    I recently bought a HP Pavilion 500-314.  Specifications are the following:

    http://support.HP.com/us-en/document/c04293928

    The unit includes the integrated graphics card Radeon R7 and comes with a 300w power supply

    I bought this unit in large part because it states explicitly that "supports PCI Express x 16 graphics cards".  I run a quad-monitor configuration for my work and traditionally did it this using a card ATI over-pants 2450.

    I tried now three different external graphics cards and can get any of them to work:

    First attempt was with a VisionTec Radeon HD 5570 (point #900345).  This card supports quad-monitor configuration and requires a minimum power of 250w.  When I installed the card, the HP Pavilion beeps several times a series of 4 or 5 (can't remember which) emits a beep, but refused to send an image to a video output (either on board or the new card).

    Next attempt was with an EVGA GeForce GT 610.  It's a Setup dual monitor and requires a minimum 300w power supply.  Got the same exact response as with the VisionTec (i.e. the series of beeps... computer would not start all monitors).

    So both of these cards (new), I basically gave up immediately that I couldn't in the BIOS (b/c wouldn't monitors) to see what was going on.  My understanding is that the series of 4-5 beeps usually means that there is a problem of graphics card, or the card that was added doesn't have enough power.  It's frustrating, because the HP Pavilion 500-314 a supposedly a 300w power supply, which is at least equal to the minimum required for each of these cards.

    At this point, I took out the ATI over-pants 2450 my old machine and tried.  This card at least has not caused the series of 4-5 beeps.  Windows has started.  However, once I log in, Windows tries to install the new (card over-pants) repeatedly, only then, the screen flashes and blinks and flashes.  Then I went into the BIOS.  The BIOS indicates that the system recognizes the card, and that the integrated video has been disabled.  However, there is always a signal coming out of the onboard video output (DVI), so it is not in fact actually disabled.  My feeling is that Windows is trying to control two separate video cards (edge + external), which is what causes the problems.  I can turn off the graphics card over-pants w/under Windows (in Safe Mode) and let the card installed, and things work fine.  However, as soon as I try and activate the card, I get endless cycle flashing monitors.

    I spent a few long sessions with HP technical support and they were useless.  They claim that this is not a problem of HP as the embedded video works fine.  I find this extremely frustrating response.  I think it is a matter of HP, because BIOS doesn't seem to be properly disable the onboard video.  Not to mention that the PC can't seem to properly interface with Windows compatible 8 PCI-E cards that claim explicitly require less energy than this unit has.

    I'm usually pretty computer savvy, but have reached my wits end on this one.  I'd appreciate any help anyone could provide.  I tried all kinds of combinations of variables (i.e. enabling integrated video, setting external card at the elementary level, etc.) through the BIOS, but also combinations of w/under Windows, disable integrated video, but nothing is working.

    900345 VisionTek Radeon HD 5570 1 GB DDR3 PCI Express 2.0 x 16

    Big_Dave,

    Thanks a lot for your quick response.

    The first time that I spoke with HP support, they had me disable secure boot.  Unfortunately my problems (i.e. the cards would not install correctly).  However, after reading the link you provided that I was inspired to try things one last time with a new beginning.  I uninstalled all drivers, removed all cards, re-engaged start-up secured, restarted, close, disabled secure boot, reinstalled the cards and rebooted.  And, this time, the system accepts the card GeForce GT 610.

    Difficult for me to express how grateful I am to you.  I spent two weeks and countless hours trying to get this corrected.  Just I found these forums earlier wish.

    WallMonkey02

  • HP Pavilion 500-314: keyboard does not work on startup

    At the start, that the keyboard is not working I have to unplug it and plug it back in

    to make it work. He doesn't do it every time that 1 in 10 starts. The mouse works fine.

    I tried differrent 2 same keyboards. Tried different ports samething.

    HP Pavilion 500-314

    Hello @jwhisenhunt,

    I understand that your desktop computer keyboard work correctly, and that this problem occurs with more than a keyboard. I'd be happy to help you in this case!

    This problem occurs if you start your computer in Safe Mode? Your keyboard is connected to a PS2 or USB port?

    In the meantime, I recommend that you follow the steps described in this document on the wired keyboard (Windows 8) troubleshooting. This should help to correct for non-response of your keyboard.

    Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

    Concerning

  • Pavilion 500-314

    I installed Windows 7 on this 500-314 Pavilion. I am hving find USB 3.0 drivers. I tried those listed in the download area, but they fail to install. Any help would be appreciated.

    Hello:

    See if both of these drivers installation works for you...

    http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=6943836&SP...

    http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=6943836&SP...

  • Speaker question: 500-314 and Logitech z313 Pavilion

    Hello

    I just bought a new building of HP computer desktop 500-314 and I try to plug my speakers that came with my old Dell desktop computer. They are Logitech z313 and works well on my dell.

    I have two males analog connectors, one for the speakers and subwoofer. At the back of the Tower, there are 6 analog female connectors: C/SUB, to, BACK outside, SIDE, MIC.

    I tried different combinations. The only one who seems to have any output is when I plug something OUTSIDE. If I plug the subwoofer in IT works fine but I get nothing from the speakers anytime I plug it in. If I plug the speakers on OUT I get very little volume on the speakers and can't turn them.

    I checked in the audio settings and the volume is set to maximum. On my old computer that used to play very hard that I didn't need to increase the volume of more than 40%.

    Kent, welcome to the forum.

    I think that your old computer is no doubt running Win 7 or an earlier version.  Your new computer running Win 8.1 (64-bit).  Here's what the Windows Support page for speakers have to say:

    Speaker System Z313
  • Pavillion 500-314: update of MS-7609

    I'm desperately trying to find a BIOS update for the card mother MS-7609 (Orchid-S). Please link to me to any driver or BIOS updates for this motherboard, thank you.

    Hello @ZackeryBagley,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I read your post about the issue with drivers and wanted to help you!

    You can find the drivers for your product here: desktop HP Pavilion 500-314

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • desktop computer 500-314: cannot download sp66692 driver for Realtek eathernet.

    I can download all the drivers for my pc (500-314), except a title sp66692.  This is the driver for my eathernet card.  I use my wireless right now, but I want to be hard wired ot my modem.  Any ideas why it's the only one that will not download?  It always take me to screen 'language '.

    Hello

    Where do you get sp66692 of? It should be the following:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134594-1&cc=us&DLC=en&LC=en&OS=4063&productOid=6888185&sw_lang=

    More drivers for your computer:

    http://support.HP.com/us-en/product/HP-Pavilion-500-desktop-PC-series/6879020/model/6888185/drivers

    Kind regards.

  • Pavillion 500-314

    Just bought a tower Pavilion 500-314, where can I find out what motherboard I have, that can be added etc.

    Documentation that accompanies it tells me zip

    Hi CaptainEgg,

    Here's your hardware specifications:

    http://support.HP.com/us-en/document/c04293928

    And here's how to guides of different hardware changes:

    http://support.HP.com/us-en/document/c04293928

  • HP Pavilion slimline 400-314: work which hard drive to my hard drive adapter

    "My old HP Pavilion slimline computer s5123w turns to March 2015, there a drive hard internal Barracuda 3.5 ST3500641AS-RK can I use a Vantac 2.5"/3.5"/5.25" SATA/IDE to USB 2.0 adapt - CB-ISATAU2 model for hard drive Barracuda to transfer the Outlook2003 to my new computer a HP Pavilion Slimline 400-314

    Thanks Scott

    Hello

    You can find them (May marks) of any good computer store.

    http://www.vantecusa.com/en/product/view_detail/416

    Kind regards.

  • New Graphic card of the HP Pavilion HPE-500-cs

    Hello, I have HP Pavilion HPE 500 - cs with win7 on it.

    Because I wanted to give my PC to my brother, I decided to keep the GTX 460 graphic card to give it a lower new Ge Force 9400 GT which I got from my friend. There is not a supply of radiator connector and PCI-E connector was reconected several times so it is not loose.

    But what is the problem. When I try to start the HP Pavilion with new GPU, it freezes just to the HP loading logo and I can't do anything.

    Is there a way to change the old GPU to give it the lowest?

    There is something on the forums on secure boot in the bios, but it's just for win8.

    Thank you

    Edit: Sorry for my mistake... I called the power as a PCI connector which of course isn´t

    Thank you very much, but now I see the problem in me.

    And it s because I have a different look in the bios and I can´t see the menus as it guides, but I remember that once it was like that.

    This would solve my problem if I could downgrade somehow it back.

    But still, thank you for your comment

Maybe you are looking for

  • Envelopes (incoming e-mails) along the top of the screen are in practice no order are so useless, what is it for?

    I can't find the intuitive user interface, but I would like to use all the features that are useful.For the moment, I get, but the interface makes feel me stupid.

  • with WSN Vernier temperature probe?

    Hello everyone. I have a hard time trying to get the sensor measures. I created the thread here: http://forums.ni.com/t5/LabVIEW/steinhart-hart-with-vernier-thermistor/m-p/2811150 I think that now the formula is fine. So I realized, it could be that

  • What is a paint program

    my computer is not a "paint" program that asked me to use in order to send a SCREEN CAPTURE of my black square problem. Please notify. Thank you

  • High volume Web BlackBerry services test

    Hello again, We have a scenario where we need to test a set of custom admin web pages (which use BlackBerry web services for administration). Can anyone recommend a tool / partners who can help you simulate a number very high BlackBerry devices (10 0

  • Cannot close the invoked addressbook of background app.

    Hello I am unable to close invoked addressbook of background app. For help on; try {}{}signalStatus5 = net.rim.device.api.system.RadioInfo. getSignalLevel();Thread.Sleep (5000);} If (signalStatus5 == RadioInfo.LEVEL_NO_COVERAGE); int modHandle = Code