Pavilion13x360PC: Pavilion 360 screen jumps and taps, when I'm not in touch with her

Since I bought this House for my daughter (less than a year ago) that she had problems with her.

The touch screen seems to have a will of its own. He draws from the left side of the screen, and when this happens, it has stop working and wait for it to stop which can take between 30 seconds and 5 minutes.

It happens when she uses it for work or meters far to watch videos.

My daughter is in the middle of GCSE work and it is so important that it stops as it is originally its indescribable stress at a time when his cell phone should be helping, please help!

Hi @Quizzled,

I will send a PM (private Message), please see the HP Privacy Statement.

This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

Thank you.

Tags: Notebooks

Similar Questions

  • Screen answer when I'm not in touch with her

    Hello

    My iphone guard screen is freezing and don't answer or just the opposite will be starts randomly, opening the app / type messages / try block people or a ring. It's as if the phone is unable to overprint when I am not touching her.

    Yesterday, I wiped the phone, it did not work. I also updated to the latest IOS.

    Before I even re-installed by backup, he was doing things such as zooming, twinkling and try to type in the access code when I was trying to set up a.

    Does anyone have advice on how to fix this? I got on the phone for almost a year now, it seems to go through phases where he works then when it doesn't work but it has been done gradually worse and I can't use the phone now.

    Thanks for your help,

    Lauren

    I'm having the same exact questions.  I bought my iPhone 6 more on 2 December 2014, a little more than a year.  It behaves in the same way, working for a few seconds then the screen freezing or slow to react when they are hit, opening apps calling people, not affected, will not respond.  After the removal on the desktop, it continues to open things randomly.  It has a small "digital snow" box at the top of the screen when it starts to freeze, etc..  After the reboot of the force, it works temporarily and then again such things.  Very frustrating, can someone help please?

    Glenn

    iPhone 6 Plus, iOS 9.1

  • Why does the url keep refreshing when I'm not in touch with her?

    I typed in the website (www.n2yo.com) and press return to open it. Unfortunately he keeps just acting like it is refreshing and not to open the Web page. That is to say the image to the left of the url continues flashing alternating with a square as the form, and the circle of progress and the line at the top just guard flashing and back to zero.

    It worked fine yesterday. Some parts of the Web site worked very well earlier today too. But now all the variations of a page in this site seems to do the same.

    Thoughts? Advice?

    I see the same thing during the visit of this website with Firefox and Google Chrome.

    I am looking for some JavaScript that runs on this Web site is broken I get a page when I disable JavaScript.

    The web console shows a lot of errors like these:

    An unbalanced tree was written using document. Write(), causing data from the network to be analyzed again. For more information https://developer.mozilla.org/en/Optimizing_Your_Pages_for_Speculative_Parsing @ http://www.n2yo.com/:12

    You can contact this Web site to inform them about this issue.

  • My phone connects random screen activity when I am not in contact with her.

    My flame is super Ahmed suddenly. I can't really use it, which makes it more hard problems. He seems to think I'm dragging in the center of the screen constantly, even if I'm not in touch with her.

    I started having this problem with a previous flame, but I broke the screen and the problem was concentrated where the screen was more damaged. This time, the screen is fine.

    The problem is localized somewhat: if I open settings, Geolocation tilt begins to tip like crazy. If I hold down the power button, immediately turns the power on and off - those who are both on the same section of the screen.

    Any thoughts on how to fix this?

    For me it looks like a hardware problem. Make sure the screen is clean and try to restart the phone. If it is persistent, you may have to contact the manufacturer.

  • after update my screen jumps and then down says something about sha - 1 certificates. any help?

    When I open the browser the bottom of the screen jumps and then after a while, I get a screen. This looks like a devloper control screen. and receive warning messages on sha - 1 certificates.

    Hello, if it happens by itself, please make sure that that you do not encounter the keys that are stuck or shift on your keyboard (or try with another keyboard). what you describe sounds like the developer of firefox tools are open, they can be invoked by pressing F12 for example...

  • So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

    So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

    Hi GuyT6,

    ·         What version of the operating system is installed on the computer?

    I suggest you contact the customer assistance form help and more information.

    How and when to contact Microsoft and support Customer Service

    http://support.Microsoft.com/kb/295539

  • Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

    Hello everyone,

    I bought this fantastic machine called spectrum x 360 and I love it.

    Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

    This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
    This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

    Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

    Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

    The entire screen works fine for normal operations, no artifacts.

    Replication of the problem
    Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
    Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
    Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

    I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):

    -update panel houses;
    -advanced mode; energy saving

    If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.

    In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
    The rest of the computer works correctly.
    Any idea to solve this problem? Or should I keep these options turned off power saving?

    Hi, thanks for your help.

    I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
    Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
    I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
    To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
    It certainly is a problem with this energy-saving option.
    Now everything works fine.
    If the problem appears again, I will post more information.
    Thank you for your support.

    I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

  • Full screen jumps 2 lines when the mouse moves to top

    The lines at the top of the screen disappeared. Only when I move the mouse above do they reappear, but then I lose the bottom lines 2.

    Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).

    If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.

    You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press F11.

  • E: HP HP Envy screen glitches and freezes when at a certain angle

    When my screen is directed through an angle of 90 degrees, my screen either glitch on (colors are reversed, etc.) or sometimes freeze while the screen becomes clearer until it whitens.  When this happens, the only way to fix the screen is to move the screen at a different angle.  Any ideas what is causing this problem and no solution?

    Hey @el1054,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP Envy laptop and having problems starting with lines on the screen. Here is a link to a document that will help you to troubleshoot the image on the screen flickers, has lines or distorted colors.

    You have connected a monitor to the laptop to check if it comes to that as well?

    If it does not appear on the screen, it could be a connection problem with the LCD screen or the inverter cable.

    Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

    I'd be happy to help you if necessary. How can I find my model number or product number?

    Please let me know how it goes.

    Thank you.

  • Page jumps and jiggles when scrolling. How do I solve this problem

    This just started yesterday.  When I move my mouse over a page, the page jumps and stirs so much it makes me dizzy.  How can I fix it.

    Try these links

    https://us.en.KB.Sony.com/app/answers/detail/A_ID/34580

    https://us.en.KB.Sony.com/app/answers/detail/A_ID/32225

    https://us.en.KB.Sony.com/app/answers/detail/A_ID/42291

  • When I sync my ipod touch with itunes only the first song is downloaded and then he sits for hours

    When I try to sync my ipod touch with iTunes, only the first song seems to be downloaded, then he just "hangs" for hours

    What happens if you try to synchronize not this first song and next song?

    What is listed n the block status of iTunes when it freezes?

  • Restored my HP Pavilion to factory settings and now when I turn on the computer starts a recovery to start, then he can't find something wrong and want to do a system restore

    I have a HP Pavilion with Windows Vista.  Friday night, I restored the computer to the factory settings.  After doing what he started back to the top as usual and was very good.  I shut down my computer Friday night and then Saturday morning, when I turned on the computer screen to start Recovery came and when throught he process of trying to find errors and found nothing and then gave me a message at each stop or do a system restore.   Does anyone know why it would start this resumption of start after that I just restored it?   I'm ideas... Please help.

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

    You restored your computer for some reason any.

    And now you have problems after using the HP recovery process.
    It seems to me that you might have another problem inyour computer.

    Problem with HP Recovery Process(during or after), contact HP.

    It's Recovery process HP, not Microsoft.

    See you soon. Mick Murphy - Microsoft partner

  • Just bought a msi gtx 750 ti OC edition.when installed does not start, ends with a black screen and the cursor

    As indicated in the title, I bought a ti 750 gtx.

    N750Ti-2GD5/OC

    The machine had a 620 in gt and works very well with it in. When I install the ti 750 gtx, however, the boot system hangs on a black screen with cursor / underscores and a single beep.

    The system is a h8 1203, with a power of 460.

    I also have a gts 250, that also installs and works fine. Ive read a little, and there is a problem with this map and the hp system? something about the type of bios? I couldn't quite follow what has been said.

    Hello

    If you upgrade to Windows 8 (UEFI-mode Setup) and apply the BIOS posted updated so you should be able to work to the video card.

    Don't forget to create a set of external support of HP recovery before installing a new operating system.

  • Screen jumping and overheating issues on my Satellite Pro M30

    Hey everybody!

    I have a Satellite Pro M30, the screen seems to wobble a bit, probably due to a loose hinge. Can you please help me with this problem?
    In addition, my laptop seems to overheat, how do I clean the dust to stop overheating?

    Thank you

    Hi mate!
    For the screen issue. As it is a hardware thing, I suggest that contact you a local ASP. Of course, you can try by yourself to this problem, but I can say from my own, fitting the screen isn't the easy thing to do on your own, if you have no experience in that.

    To clean your laptop from dust, you can use compressed air jet. Also make sure the cooling modules are not blocked by objects on your table, because if you've blocked, warm air ponds and cannot be updated.

  • Pavilion 22bw is black and white when you watch the video on web page

    I recently bought an HP 22bw monitor.

    I am connected to a desktop HP Pavillion with a DVI, HDMI video connection, no. My resolution is 1920 x 1080.

    My problem is whenever I want to watch a YouTube video on a web page or a web page has an inserted in video as upper right of Sportsillustrated web page the monitor goes black and white. The only way he'll be back, if I move the mouse, which he corrects only for a few seconds and then goes back to white/black.

    Any suggestions on how to fix this problem would be greatly appreciated.

    HD of my PC died on me, so I'll close this message. After I received my PC a few up and running, I'll post my problem again.

Maybe you are looking for

  • Unlock with Apple Watch disappeared

    After the upgrade to sierra today I wanted to turn the unlock with feature Apple Watch. First of all I saw under security settings. Once turned on, I invited myself I go posting two-step verification of two factors. I did this, but when I tried to tu

  • Satellite Pro M30: three "soft-buttons" don't work

    Satellite pro m30 there are three buttons that I can attribute using the toshiba software. Or Toshiba installed by default programs or my programs are put into service after a change more: should I reinstall something? Hans

  • Can I collect mysteriously deleted emails?

    My wife wrote a long email today to his sister. When she finished, she hit "send". Immediately, the mail has crashed and his new message disappeared. She re-launched the Mail, but the message was nowhere – not in air currents, or Outbox, sent and Tra

  • Railroad Tycoon 2 on Windows 7 error - setup.exe cannot start or run due to incompatibility with 64-bit Windows versions

    I'm playing the game "Railroad Tycoon 2-Gold edition" on my laptop which is running Windows 7. Whenever I try to install it, he repeats to me - "the program or feature? \G:\_setup\setup.exe cannot start or run due to incompatibility with 64-bit Windo

  • Upgrading RAM gives the Blue error screen.

    Original title: tried to grade until my memorey: 256 MB in the two slots to 2 1gigs RAM but keeps giving me a blue screen can anyone help im using a dell dimension de051 cpu 2'53 ghz intelceleron had 2 256 MB of ram installed ddr I tried up to grade