Pavillion 2003sm g6: problem
How to turn on the camera on hp Pavilion 2003sm g6? I have instaled the drivers.
Hello
You can use the following software to check your camera
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63287.exe
====================================================
Although I am an employee of HP, I speak for myself and not for HP. ===
* Click on the star of CONGRATULATIONS on the left say "thank you."
Tags: Notebooks
Similar Questions
-
HP Pavillion G7 loading problems
Hello all, my laptop G7 has been done more slowly and now there is a problem loading as it won't. I tried to remove the battery, restart and the only thing I get is the HP sign and then it shows the loading circle and then the screen goes gray. The keys on the keyboard sign up if you press them, but nothing doesn't appear on the screen. Any ideas?
* Click on the star of CONGRATULATIONS on the left to say thank you * if your problem solved
Make it easier for others to find solutions by checking a response 'Accept as Solution' If this solves your problem already
Thank you
K N R K
I work on behalf of HP
-
HP pavillion a6720y clock problem
The time on my HP Pavilion a6720y desktop PC display is seriously wasting time.
I think I need to replace the internal battery, but I'm not sure if us a solution. Also, not sure where to find the battery once I find.
Standard button battery is a CR2032.
-
Hello
I have a Pavillion a1330n restoration problems. I have 3 HP recovery disks, and restore all going through very well. Then I reboot and a configuration of HP screen. After a minute or two, it gives this error: "SW Build different ID of ID recovery media" and stops when I click OK.
Last week, I replaced the card mother and RAM. I ordered and installed a motherboard ASUS A8AE - THE of oemzone.com. I uderstand it is the cause of the error SWBID. Something about the BIOS not havig a build id "tattooed" on this subject.
So my question is this. There the utility that I can use for my new bios State so that my recovery media works?
Thank you
Ok. I edited the recovery.cmd script in the hope of deceiving some Build ID checking the thing they have.
I replaced this line:
REM, set the tender = xxxxxxxx yyyyyyyy
with this:
Set the tender = zzzzzzzz
Where zzzzzzzz corresponds to the ID to build on the recovery disks.
Then restarted then it could go back into the thing of installation time. Some error pops up here and there, but the rest of the installation successfully. But upon restart, an error on a Configuration of the system (Code Purple) error.
I really don't know what to do from here. Any suggestions? Thank you.
-
Pavillion 2288se g6: WiFi problem
I have a pavillion 2288se g6 that wifi does not work. The F12 key is red instead of white, there is no yellow staff on the pilot. Please, how can I activate wifi?
Hey @Japhetshan,
I understand that you are experiencing you encounter some difficulties to connect your laptop in WiFi and I want to help.
Here is a list of steps that solve common problems with wireless connectivity.
First of all, we have a step by step guide to guide you through the process of diagnosis here:
Troubleshooting your wireless network and Internet accessA second option is to try the following steps:
Network power cycle:
1. turn off your laptop.
2. unplug the power to your router.
3. disconnect the power to your modem.
4. wait at least 45 seconds.
5 reconnect the modem and wait for it to come back online.
6 plug in the router and wait for it to come back online.
7. turn on your laptop and test your connection.
Turn off the power to the adapter:
1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
2. expand the network adapters.
3. right click on the Ethernet adapter / wireless, and then click Properties.
4. click on the power management tab.
5 remove the check mark next to allow the computer to turn off this device to save power.
6. click on OK.
7 test cycle.
Reset the TCP/IP settings on your PC:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
4 restart your PC and test.
It can also help to reset the winsock catalog:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
4 restart your PC and test.
Reinstall the NIC drivers:
1. download the drivers from here , but do not run them again.
2. go to your Start menu/screen and type Device Manager.
3. expand network adapters.
4. right click on the wireless adapter and choose uninstall.
5 install the drivers downloaded in step 1.
6. restart your PC and test.
Test an Ethernet connection:
Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
Test another connection:
Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down menu in the upper right corner of the document.The above steps are presented by @Great-Christine-Tree
I hope this helps. If so, please hit the Thumbs Up and accept as a Solution.
See you soon,.
TechSurge.
-
HP Pavillion m6 1005tx laptop hinge problem
I have been using HP Pavillion m6 1005TX for 1.5 years. But from the beginning there was problem in the hing of the laptop. He made his 'kad - kad' when I open or closed the laptop. And, by the way of 3 of my friends who have the same laptop reported the hinge problem. I want to know, is this a manufacturing defect?
If yes or no! Is it covered under warrany?
I need the replacement of hinge and defective parts. Please give your insight.
My warranty is valid until August 15, 2015.
Thank you for your valuable comments. The troubled free hinge changed HP service center. It is covered by the warranty. I appreciate HP for fast service.
-
Pavillion 500 - a60: Windows 10 activation problem
My hard drive failed completely and was unrecoverable. I replaced the HD and reinstalled Windows 8.1 and it activated successfully. Windows prompted me to upgrade to Windows 10 I tried and after it installed, he refused to activate saying that is not a valid digital license. It gives the 0x803F7001 error code. When I tried to activate by phone, he said that he has already been activated on another device. Then he me connected to a Microsoft agent and he said that the key to Windows OEM installed with the PC is not valid for activate Windows 10 and I had to contact HP for a KEY appropriate to enable activation.
Since the PC is out of warranty there is practically no way of contacting technical support without pay which I think is wrong in this situation. It is the first time that I'm trying to upgrade to 10 Windows, and I have the product key of Windows 8 BIOS of the machine.
I can't find any help on how to solve this problem.
Greg
I managed to get in touch with someone at Microsoft, which has provided a new key and now I have the problem solved. It would have been nice if if HP provided a way to communicate with them on this particular type of problem.
Greg
-
Pavilion 15-n023cl: Windows 10 problem with AMD graphics card laptop Pavillion
Upgrade to Windows 10, but it can only function in Mode without failure. Installation seemed to go very well. At the start of Windows 10 for the first time, developed the background of the desktop and the taskbar, but not the icons on the desktop. When I put the cursor on the task bar, it shows that the system is busy. The screen flashes then between black and the wallpaper image, with the bar to come a fraction of a second before the background image of the tasks. These images alternate with an interval of one second.
Microsoft advised me to update my graphics driver, but the system shows that I have the latest version of the driver for the AMD graphics card. Any advice?
Found the problem. The 8510 G AMD Radeon HD display device is not compatible with Windows 10. Only the 8570 and higher series models are compatible. It would be good if HP had some sort of program or advice to help us Pavilion 15-n230cl owners spend so we can run Windows 10. Restored Windows 8, everything is back to normal.
-
Problem WiFi Hp Pavillion dv6608ca laptop. Help, please.
Hi guys,.
I upgraded HP pavillion dv6608ca laptop from a friend of Windows Vista 32-bit to 64-bit Windows Vista. The wireless doesn't work anymore. I tried to install what I thought were the proper drivers, but still no luck. It's been a few days I've tried, today I can't no more. I thought a simple question are becoming a major issue now because of the amount of time and days it takes me to a solution. Help, please!
Thank you in advance,
Chris
Hey, Chris:
Here's what you probably do. Download and run the driver on the link below.
You will probably get an error not supported operating system.
Conclusion of any windows error. Go to Device Manager and click to expand the display of the maps section.
Click on the graphics card of Microsoft Basic. Click on the driver tab, click on set to update driver.
Select travel it my computer for the software method and find the folder of the driver that was created when you ran the file. Who will be in C:\SWSetup\sp42635.
Make sure that the include subfolders is selected, and the driver should install. To restart, I hope that your video will work normally.
-
HP Pavilion 15-p247sa 15.6 ": problem with Hybernation - HP Pavillion
Hello
I have problems with my HP Pavilion laptop since update to Windows 10 a few weeks ago.
My laptop works fine until I hit the power button or close the lid to hibernate the PC. When I try to wake up the PC by re-opening the lid or hitting the power button / nothing happens, the light on the power button is still on but the PC won't start and the screen remains blank. I have to remove the battery and put again before hitting the power button to restart the computer, even if it isn't a critical error it's boring and inconvienant to reboot the PC in this way, because it's a total system reboot.
Can anyone help?
Thank you
Jamie
No worries that the fix was found a lot of people have had this problem proceed as follows.
HOW to SOLVE SLEEP/STOP/set Hibernate ISSUES
- Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
- Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model. Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down. Find the download in the category 'Driver-Chipset' If a pilot of MEI with a version from 9 or 10 number is listed, download. [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
- If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine). [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
- Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
- Change the Windows Update Services automatic (delayed start) parameter to the manual.
- In Control Panel, select administrative tools, and open Services.
- Go to Windows Update and double-click it to view its properties.
- Click on stop to stop the service to run.
- Change the Startup Type to manual, and then click OK.
- Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver. If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
- NOTE: You have NO need to uninstall version 11 before installing version 9 or 10. The presence of a version of the driver is required to 'upgrade' (or demote in this case).
- Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver. (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
- Change back the setting of Windows Update Services to manual automatic (delayed start).
- Restart your computer.
- Rejoice! You can finally sleep, stop and hibernate again. hope this helps
- Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
-
Problem after installing the new drive on Pavillion G6-2320
The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)
After you install the new hard drive and turn on the laptop, the following message appears on the black screen:
Not found boot device
Please install an operating system on your hard drive
Hard drive (3FO)
The F2 System Diagnostics).
I went to F2 and test the hard drive. Everything was made. Help please!
Thank you
Hello:
You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.
HP is not delivered replacement hard drives pre-configured with any software.
They should also ship you the free of charge from the PC recovery discs is still under warranty.
-
HP pavillion (don't know who): Hard reset - system cooling fan problem
When I turn on my laptop a message indicating that there is a problem with the cooling system etc., (90 b system fan) fan
I followed some instructions online include blowing through vents to try and remove any dust or dirt build up, the next time I turned on my laptop the message disappeared... However, it turned up which means that the problem is still there.
I went on hp techcenter Web site and he said to do a hard reset as the next step - I'm afraid that this will remove all my documents, music, pictures etc it goes?
In addition, will be a hard reset even fix the fan cooling or is something that must be taken in a store to fix properly, I don't want to mess with it and have it crash on me even more!
Would appreciate any advice or suggestions, thank you!
Hi LCh1,
Please try the following,
A Hard reset about a drain of power & does not affect your files.
Just unplug battery & adapter then press & hold it hold the button for 30 seconds & then tun turn it on with the power cord only.
This is the right way to do a Hard reset.
Also update the BIOS to make sure a little extra.
After all, if you have the same problem, contact HP Support by phone or chat if the asset guarantee.
Or buy the chassis fan & do replace it yourself or contact a local ASP
It may be useful
-
Pavillion DV6 1030US: another problem of devices
Hi, my problem with other devices is as follows:
Network controller?
Acquisition of ICP data and Signal Processing controller?
SM Bus controller?
Unknown device?
Unknown device?
I have installed the pilot identifier in the computer but when run it tries to go to the internet and I don't have access to the internet on this computer, he sees not either other computers on the local network
Hello:
You must install the driver for smbus controller chipset and PCI Data Acquisition and Signal Processing controller.
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20019&lang=eng&ProdId=816
You need this driver for network controller.
For unknown devices, I will need the hardware ID of them...
Go to Device Manager and click on the unknown device need drivers.
Click on the Details tab in the upper part of the device window unknown.
Now, you see a drop-down list of property and it is set by default to the Description of the unit.
On this list and select the second element (Hardware ID).
After the first string of characters you see in the window, so I can understand what the device is.
-
HP Pavillion DV7-6052ea: Wireless problem card
Hi, I'm moving my Wifi card of a 802.11ac card for 5 Ghz speed
I have a Pavillion DV7-6052ea with i7-2630qm.
Laptop came with Broadcom 4313gn 801.11bgn card and looking at the manual here it says that the Intel Centrino Advanced - N 6230 is compatible with my laptop but when I install it the laptop does not start, it's just a black screen with a text box (not flashing) solid.
It give me any option to go into the BIOS and the fan is working, if I press the power button / stop, it stops immediately.
I also have a Centrino Advanced - N 6035 from another laptop, isn't on the list supported in the manual, when I install I get a message saying that the card is not supported.
Any ideas why the laptop does not start with the 6230?
Because it is not on the white list in the BIOS. The guide indicates a N-6230, but if track down you the part number in the manual it takes to another card. There is no option double band of 5 GHz laptop, that I do not say. Let alone a 802.11ac option.
-
Pavillion G6 2014tx: wireless connectivity problems
Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...
I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...
Hi there @Parthsagar2010
Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.
I understand that you are having problems with your wireless connection, and I am happy to help you with this.
I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.
HP Pavilion g6-2014tx Notebook PC - software & drivers
The following pages are useful for troubleshooting wireless connectivity problems.
Troubleshooting your wireless network and Internet access (Windows 7)In addition, you can watch the the power management of your wireless adapter:
Turn off the power to the adapter:
1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
2. expand the network adapters.
3. right click on the Ethernet adapter / wireless, and then click Properties.
4. click on the power management tab.
5 remove the check mark next to allow the computer to turn off this device to save power.
6. click on OK.
7 test cycle.Forget the network: (Windows 7)
1. press start.
2. tap manage wireless networks, click on the application at the top of the start menu.
3. right click on the network, and then click on remove network.
4 confirm the warning by clicking OK.Reset TCP/IP on your PC:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
4 restart your PC and test.It can also help to reset the winsock catalog:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
4 restart your PC and test.Reinstall the NIC drivers:
1. download the drivers from here, but do not run them again.
2. go to your Start menu/screen and type Device Manager.
3. expand network adapters.
4. right click on the wireless adapter and choose uninstall.
5 install the drivers downloaded in step 1.
6. restart your PC and test.Test an ethernet connection:
Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.Test another connection:
Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
Maybe you are looking for
-
The one year Apple warranty doesn't include software
recently my macbook os cause me problems and I'm trying to install the new operating system using the recovery mode, something went wrong and os is gone, now, I am unable to navigate in the mode of recovery too, so I went to the Apple authorized serv
-
Usually, this happens whenever I do a right-click for a new tab or click on a link. Unwanted tab always has the URL http://xn--3. 1-fua0do447bmv6g/#%C5%93%C3%8e%06%E2%80%99Ucr%C2%B7%C3%80 and I'm constantly having to close these tabs.
-
HP 4620: HP 4620 scans very well, but could not save the analysis in a file
The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.
-
Presario CQ43: need administrator password or power on password
Hi there need help for administrator password or power on password I have been locked out for laptop I noticed others had the same question and they have counted the number of displayed disabled system after that 3 failed attempts The number that com
-
Printer is offline due to error usb
Hello - my HP all-in-one C309a printer is off line. Although the wireless and bluetooth light is blue (as all the GB) there is a message saying that I need to remove a usb device not recognized by the printer. Although I used a USB several days ago t